© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC PWR SUPPLY CONTROLLER 48TQFNThe MAX17017GTM+T is one member of the MAX17017 family which is designed as the quad-output controller that provides a compact, low-cost controller capable of providing four independent regulators-a main stage, a 3AP-P i...
Vendor:Other Category:Other
The MAX17014A multiple-output power-supply controller generates all the supply rails for thin-film transistor (TFT) liquid-crystal display (LCD) panels in TVs and monitors operating from a regulated 12V input. It include...
Vendor:Other Category:Other
The MAX17010 contains a high-performance step-up switching regulator, a high-speed operational amplifier (op amp), and a high-voltage level-shifting scan driver.The device is optimized for thin-film transistor (TFT) liqu...
Vendor:Other Category:Other
The MAX1700/MAX1701 are high-efficiency, low-noise, step-up DC-DC converters intended for use in batterypowered wireless applications. They use a synchronous- rectified pulse-width-modulation (PWM) boost topology to gen...
Vendor:Other Category:Other
The MAX17005B is designed as one kind of 1.2MHz, low-cost, high-performance charger device that can be used in wide range of applications such as (1)notebook computers; (2)tablet pcs; (3)portable equipment with rechargea...
Mfg:MAXIM Pack:SOP D/C:06+ Vendor:Other Category:Other
The MAX1700/MAX1701 are high-efficiency, low-noise, step-up DC-DC converters intended for use in batterypowered wireless applications. They use a synchronous- rectified pulse-width-modulation (PWM) boost topology to gen...
Vendor:Other Category:Other
The MAX1698EUB-TG096 belongs to MAX1698 family which is the most efficient driver for white or color LEDs and it also is ideal for LED backlit displays in PDAs and digital cameras, and can also be used for larger display...
Vendor:Other Category:Other
The MAX1698 evaluation kit (EV kit) is a fully assembled and tested circuit board that contains a boost switching- regulator current source and array of white LEDs. As configured, the circuit is set up to drive 3 banks o...
Vendor:Other Category:Other
The MAX1697 ultra-small, monolithic, CMOS chargepump voltage inverter accepts an input voltage ranging from +1.25V to +5.5V. This device features an ultra-low 12 output resistance, permitting loads of up to 60mA with max...
Vendor:Other Category:Other
The MAX16945 ultra-small, monolithic, CMOS chargepump voltage inverter accepts an input voltage ranging from +1.4V to +5.5V. This device features an ultra-low 12 output resistance, permitting loads of up to 30mA at +105 ...
Vendor:Other Category:Other
The MAX1693/MAX1694 are current-limited, 60mΩ switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply cu...
Vendor:Other Category:Other
The MAX1693/(MAX1693H)/MAX1694 are current-limited, 60m switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent suppl...
Vendor:Other Category:Other
The MAX1693/MAX1694 are current-limited, 60mΩ switches with built-in fault blanking. Their accurate preset current limit of 0.7A to 1.0A makes them ideally suited for USB applications. Their low quiescent supply cu...
Vendor:Other Category:Other
The MAX1692 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM), step-down DC-DC converter.The EV kit provides a +2.5V output voltage from a +2....
Vendor:Other Category:Other
:
The MAX16914/MAX16915 low-quiescent-current overvoltage and reverse-battery protection controllers are designed for automotive and industrial systems that must tolerate high-voltage transient and fault conditions. Du...
Vendor:Other Category:Other
The MAX1687/MAX1688 step-up DC-DC converters deliver up to 2W from a single Li-Ion or three NiMH cells. The devices are ideal for burst-load applications such as GSM cell phones and wireless LANs, where the RF power ampl...
Vendor:Other Category:Other
The MAX1687/MAX1688 step-up DC-DC converters deliver up to 2W from a single Li-Ion or three NiMH cells. The devices are ideal for burst-load applications such as GSM cell phones and wireless LANs, where the RF power ampl...
Vendor:Other Category:Other
The MAX1686 provides power for dual-voltage subscriber ID module (SIM) cards in portable applications such as GSM cellular phones. Designed to reside in the portable unit (cellular phone handset), the 1MHz charge pump co...
Pack:TSSOP-8 Vendor:Other Category:Other
The MAX1686 provides power for dual-voltage subscriber ID module (SIM) cards in portable applications such as GSM cellular phones. Designed to reside in the portable unit (cellular phone handset), the 1MHz charge pump co...
Vendor:Other Category:Other
The MAX1685 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains a pulse-width-modulated (PWM), step-down DC-DC converter.The EV kit provides a +3.33V output voltage from a +3...
Mfg:N/A Pack:N/A D/C:N/A Vendor:Other Category:Other
The MAX1684/MAX1685 are high-efficiency, internalswitch,PWM step-down switching regulators intended to power cellular phones, communicating PDAs, and handy-terminals. These devices deliver a guaranteed 1A output current ...
Vendor:Other Category:Other
The MAX16839 programmable current regulator operates from a 5V to 40V input voltage range and features an open-drain, constant-current sink output capable of sinking up to 100mA. The MAX16839 is well suited for automotiv...
Vendor:Other Category:Other
The MAX16836 current regulator operates from a 6.5V to 40V input-voltage range and delivers up to a total of 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16836 is adjusted ...
Vendor:Other Category:Other
The MAX16835 current regulator operates from a 6.5V to 40V input voltage range and delivers up to a total of 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16835 is adjusted ...
Vendor:Other Category:Other
The MAX16834 is a current-mode high-brightness LED (HB LED) driver for boost, boost-buck, SEPIC, and highside buck topologies. In addition to driving an n-channel power MOSFET switch controlled by the switching controlle...
Vendor:Other Category:Other
The MAX16833 is peak current-modecontrolled LED driver for boost, buck-boost, SEPIC, flyback, and high-side buck topologies. A dimming driver designed to drive an external p-channel in series with the LED string provides...
Vendor:Other Category:Other
The MAX16832A step-down constant-current high-brightness LED (HB LED) drivers provide a cost-effective design solution for automotive interior/exterior lighting, architectural and ambient lighting,LED bulbs, and other LE...
Vendor:Other Category:Other
The ultra-small MAX1682/MAX1683 monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +2.0V to +5.5V. Their high voltage-conversion efficiency (over 98%) and low operating current (110µA ...
Vendor:Other Category:Other
The MAX16824 three-channel LED drivers operate over a 6.5V to 28V input voltage range.These devices provide three open-drain constant-current-sinking outputs that are rated to 36V and deliver up to 150mA of current to ea...
Vendor:Other Category:Other
The MAX16823 three-channel LED driver operates from a 5.5V to 40V input voltage range and delivers up to 100mA per channel to one or more strings of high-brightness LEDs (HBLEDs). Each channel's current is programmable u...
Vendor:Other Category:Other
The MAX16822A step-down constant-current high-brightness LED (HB LED) drivers provide a cost-effective design solution for automotive interior/exterior lighting, architectural and ambient lighting,LED bulbs, and other LE...
Vendor:Other Category:Other
The MAX16821A pulsewidth-modulation (PWM) LED driver controllers provide high output-current capability in a compact package with a minimum number of external components. The MAX16821A is suitable for use in synchronous ...
Vendor:Other Category:Other
The MAX16819/MAX16820, step-down constant-current high-brightness LED (HB LED) drivers provide a costeffectivesolution for automotive interior/exterior lighting, architectural and ambient lighting, LED bulbs such as MR16...
Vendor:Other Category:Other
The ultra-small MAX1682/MAX1683 monolithic, CMOS charge-pump voltage doublers accept input voltages ranging from +2.0V to +5.5V. Their high voltage-conversion efficiency (over 98%) and low operating current (110µA ...
Vendor:Other Category:Other
The MAX16819/MAX16820, step-down constant-current high-brightness LED (HB LED) drivers provide a costeffectivesolution for automotive interior/exterior lighting, architectural and ambient lighting, LED bulbs such as MR16...
Vendor:Other Category:Other
The MAX16818 pulse-width modulation (PWM) LED driver controller provides high-output-current capability in a compact package with a minimum number of external components. The MAX16818 is suitable for use in synchronous a...
Vendor:Other Category:Other
The MAX16815 current regulators operate from a 6.5V to 40V input voltage range and deliver up to 100mA (MAX16815) to highbrightness LED (HB LED) loads. The output current is adjusted by using an external current-sense re...
Mfg:MAXIM Pack:SOP D/C:06+ Vendor:Other Category:Other
The MAX1680/MAX1681 inductorless switched-capacitor voltage converters either invert an input voltage of +2.0V to +5.5V or double it while supplying up to 125mA output current. They have a selectable-frequency option tha...
Vendor:Other Category:Other
The MAX16809 is an integrated, high-efficiency white or RGB LED driver. It is designed for LCD backlighting and other LED lighting applications with multiple strings of LEDs. The MAX16809's current-mode PWM controller re...
Vendor:Other Category:Other
The MAX16807 is an integrated, high-efficiency white or RGB LED driver. It is designed for LCD backlighting and other LED lighting applications with multiple strings of LEDs. The MAX16807 current-mode PWM controller regu...
Vendor:Other Category:Other
The MAX16805 LED drivers eliminate the need for microcontrollers or switch-mode converters for automotive interior dome, map, and courtesy light applications. An EEPROM-programmable LED currentsense reference simplifies ...
Vendor:Other Category:Other
The MAX16804 current regulator operates from a 5.5V to 40V input voltage range and delivers 35mA to 350mA to one or more strings of high-brightness LEDs (HB LEDs).The output current of the MAX16804 is set by using an ext...
Vendor:Other Category:Other
The MAX16803 current regulator operates from a 6.5V to 40V input-voltage range and delivers up to a total of 350mA to one or more strings of high-brightness LEDs (HB LEDs). The output current of the MAX16803 is adjusted ...
Vendor:Other Category:Other
The MAX16802B high-brightness (HB) LED driver-control ICs contain all the circuitry required for the design of wide-input-voltage-range LED drivers for general lighting and display applications. The MAX16801 is well suit...
Vendor:Other Category:Other
The MAX16801A/B/MAX16802A/B high-brightness (HB) LED driver-control ICs contain all the circuitry required for the design of wide-input-voltage-range LED drivers for general lighting and display applications. The MAX1680...
Vendor:Other Category:Other
The MAX16801B high-brightness (HB) LED driver-control ICs contain all the circuitry required for the design of wide-input-voltage-range LED drivers for general lighting and display applications. The MAX16801 is well suit...
Vendor:Other Category:Other
The MAX16801A/B/MAX16802A/B high-brightness (HB) LED driver-control ICs contain all the circuitry required for the design of wide-input-voltage-range LED drivers for general lighting and display applications. The MAX1680...
Mfg:MAXIM Pack:SOP-8 D/C:01+ Vendor:Other Category:Other
The MAX1680/MAX1681 inductorless switched-capacitor voltage converters either invert an input voltage of +2.0V to +5.5V or double it while supplying up to 125mA output current. They have a selectable-frequency option tha...
Vendor:Other Category:Other
The MAX1679 battery charger for a single lithium-ion (Li+) cell comes in a space-saving 8-pin µMAX package. This simple device, in conjunction with a current-limited wall cube and a PMOS transistor, allows safe and...
Vendor:Other Category:Other
The MAX1678 evaluation kit (EV kit) provides a regulated 3.3V output while operating on input voltages as low as 0.7V with guaranteed start-up at 0.87V. The input source can be a 1 or 2-cell battery or a DC supply. Effic...
Vendor:Other Category:Other
The MAX1677 evaluation kit (EV kit) is a fully assembled and tested surface-mount circuit board that contains two separate switching-regulator circuits. The first circuit is configured for a +3.3V main output and +20V LC...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC DC/DC CONV STEP-UP HE 10-UMAXThe MAX1676EUB is designed as one kind of high-efficiency, low-supply-current, compact, step-up DC-DC converter device that can be used in (1)pagers; (2)wireless phones; (3)medical devices; (4)hand-held computers; (5)PDA...
Vendor:Other Category:Other
The MAX1674/MAX1675/MAX1676 compact, high-efficiency, step-up DC-DC converters fit in small MAX packages. They feature a built-in synchronous rectifier, which improves efficiency and reduces size and cost by eliminating ...
Mfg:MAXIM Pack:SSOP D/C:N/A Vendor:Other Category:Other
The MAX1674/MAX1675/MAX1676 compact, high-efficiency, step-up DC-DC converters fit in small MAX packages. They feature a built-in synchronous rectifier, which improves efficiency and reduces size and cost by eliminating ...
D/C:O9+ Vendor:Other Category:Other
The MAX1674/MAX1675/MAX1676 compact, high-efficiency, step-up DC-DC converters fit in small MAX packages. They feature a built-in synchronous rectifier, which improves efficiency and reduces size and cost by eliminating ...
Vendor:Other Category:Other
The MAX1673 charge-pump inverter provides a lowcost,compact means of generating a regulated negative output from a positive input at up to 125mA. It requires only three small capacitors, and only two resistors to set its...
D/C:SOP16 Vendor:Other Category:Other
The MAX1672 evaluation kit (EV kit) integrates a stepup switching converter with a linear-regulator output to provide step-up/down voltage conversion. It accepts a 1.8V to 11V input and converts it to a 3.3V or 5V output...
Mfg:MAXIM Pack:SMD D/C:06+ Vendor:Other Category:Other
The MAX1669 evaluation system consists of a MAX1669 evaluation kit (EV kit) and a companion Maxim SMBus™ interface board.The MAX1669 EV kit is an assembled and tested PC board that demonstrates the MAX1669 fan cont...
Mfg:MAXIM Pack:00+ D/C:SSOP-16 Vendor:Other Category:Other
The MAX1668/MAX1805/MAX1989 are precise multichannel digital thermometers that report the temperature of all remote sensors and their own packages. The remote sensors are diode-connected transistors-typically low-cost, e...
Vendor:Other Category:Other
The MAX1667 evaluation system (EV system) consists of a MAX1667 evaluation kit (EV kit) and a companion Maxim SMBus® Interface Board. The MAX1667 EV kit simplifies evaluation of the MAX1667 chemistryindependent Level...
Vendor:Other Category:Other
The MAX1666X provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs. The voltage of each cell in the ba...
Vendor:Other Category:Other
The MAX1666V provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs. The voltage of each cell in the ba...
Vendor:Other Category:Other
The MAX1666S provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell Lithium-Ion battery packs. The voltage of each cell in the ba...
Vendor:Other Category:Other
The MAX1666A provides complete protection against overvoltage, undervoltage, overcharge current, overdischarge current, and cell mismatch for 2-cell to 4-cell lithium-ion (Li+) battery packs. The voltage of each cell in ...
Vendor:Other Category:Other
The MAX1665X provides protection against overvoltage, undervoltage, overcharge current, and overdischarge current for 2-cell to 4-cell lithium-ion (Li+) battery packs. Very low operating current ensures that cells are no...
Vendor:Other Category:Other
The MAX1665V provides protection against overvoltage, undervoltage, overcharge current, and overdischarge current for 2-cell to 4-cell lithium-ion (Li+) battery packs. Very low operating current ensures that cells are no...
Vendor:Other Category:Other
The MAX1665S provides protection against overvoltage, undervoltage, overcharge current, and overdischarge current for 2-cell to 4-cell lithium-ion (Li+) battery packs. Very low operating current ensures that cells are no...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The MAX1664 integrates power-supply and backplane drive circuitry for active-matrix thin-film-transistor (TFT) liquid crystal displays. Included are a single-output, pulse-width-modulation boost converter (0.25Ω sw...
Vendor:Other Category:Other
The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system mot...
Vendor:Other Category:Other
The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system mot...
Vendor:Other Category:Other
The MAX1661/MAX1662/MAX1663 serial-to-parallel/parallel-to-serial converters are intended to control external power MOSFETs in power-plane switching applications. These small, low-cost devices can be used on a system mot...
Vendor:Maxim Category:ICs, Integrated Circuits, Semiconductors
IC FUEL-GAUGE INTRFC DGTL 16QSOPThe MAX1660EEE is designed as one kind of digitally controlled fuel-gauge interface that belongs to the MAX1660 family. This device can be used in (1)smart-battery packs ; (2)battery-pack fuel gauging; (3)battery-pack ov...
Mfg:MAXIM Vendor:Other Category:Other
The MAX1660 digitally controlled fuel-gauge interface executes two essential functions for rechargeable battery-pack management: fuel gauging and pack overcurrent protection. It accurately monitors a battery pack's charg...
Vendor:Other Category:Other
The MAX166 is a kind of high-speed microprocessor-compatible,8-bit ACDs with track/hold(T/H).The T/H function allows full-scale signals up to 50kHz to be acquired and digitized accurately.Both ADCs use a successive appro...
Vendor:Other Category:Other
The MAX1659ESA-T is one member of the MAX1659 family which designed as the linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. It can be used in (1)digital cordless ph...
Vendor:Other Category:Other
The MAX1658/MAX1659 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature Dual Mode™ operation, which presets the output to 3.3V (MAX1658) or 5V (MAX1...
Mfg:PHILIPS Pack:SMD-8 D/C:03 04 Vendor:Other Category:Other
The MAX1658/MAX1659 linear regulators maximize battery life by combining ultra-low supply currents and low dropout voltages. They feature Dual Mode™ operation, which presets the output to 3.3V (MAX1658) or 5V (MAX1...
Mfg:MAXIM Pack:SOP D/C:01+ Vendor:Other Category:Other
The MAX1652MAX1655 are high-efficiency, pulsewidth- modulated (PWM), step-down DC-DC controllers in small QSOP packages. The MAX1653/MAX1655 also come in 16-pin narrow SO packages that are pincompatible pgrades to the po...
Vendor:Other Category:Other
The MAX1654 are high-efficiency, pulsewidth-modulated (PWM), step-down DC-DC controllers in small QSOP packages. The MAX1653/MAX1655 also come in 16-pin narrow SO packages that are pincompatible upgrades to the popular M...
Mfg:MAX Pack:SOP-16 D/C:04 Vendor:Other Category:Other
The MAX1653 evaluation kit (EV kit) provides a +3.3V output voltage from a +4.5V to +28V input. It delivers up to 2A output current with greater than 95% efficiency, operates at 300kHz switching frequency, and has superi...
Mfg:MAXIM Pack:SMD Vendor:Other Category:Other
The MAX1652MAX1655 are high-efficiency, pulsewidth- modulated (PWM), step-down DC-DC controllers in small QSOP packages. The MAX1653/MAX1655 also come in 16-pin narrow SO packages that are pincompatible pgrades to the po...
Vendor:Other Category:Other
The MAX1649/MAX1651 BiCMOS, step-down, DC-DC switching controllers provide high efficiency over loads ranging from 1mA to more than 2.5A. A unique, currentlimited pulse-frequency-modulated (PFM) control scheme gives thes...
Mfg:MAXIM Pack:SOP-8 D/C:98 Vendor:Other Category:Other
The MAX1649/MAX1651 BiCMOS, step-down, DC-DC switching controllers provide high efficiency over loads ranging from 1mA to more than 2.5A. A unique, currentlimited pulse-frequency-modulated (PFM) control scheme gives thes...
Mfg:MAXIM Pack:QFP D/C:06+ Vendor:Other Category:Other
The MAX1647/MAX1648 provide the power control necessary to charge batteries of any chemistry. In the MAX1647, all charging functions are controlled via the Intel System Management Bus (SMBus™) interface. The SMBus ...
Mfg:MAX Pack:SOP Vendor:Other Category:Other
The MAX1647/MAX1648 provide the power control necessary to charge batteries of any chemistry. In the MAX1647, all charging functions are controlled via the Intel System Management Bus (SMBus™) interface. The SMBus ...
Vendor:Other Category:Other
The MAX1645EEI is one member of the MAX1645 family which is designed as the advanced chemistry-independent, level 2 battery charger with input current limiting that can be used in (1)notebook computers; (2)point-of-sale ...
Vendor:Other Category:Other
The MAX1645BEEI is designed as one kind of advanced chemistry-independent, level 2 battery charger device that can be used in (1)notebook computers; (2)point-of-sale terminals; (3)personal digital assistants applications...
Pack:SOP Vendor:Other Category:Other
The MAX1645A are high-efficiency battery chargers capable of charging batteries of any chemistry type. It uses the Intel System Management Bus (SMBusTM) to control voltage and current charge outputs.When charging lithium...
Vendor:Other Category:Other
The MAX1645 are high-efficiency battery chargers capable of charging batteries of any chemistry type. It uses the Intel System Management Bus (SMBusTM) to control voltage and current charge outputs.When charging lithium-...
Mfg:MAXIM Pack:SOP-16 D/C:02+ Vendor:Other Category:Other
The MAX1644 evaluation kit (EV kit) provides a 1.5V output voltage from a +3V to +5.5V input source. It delivers up to 2A output current with 92% (max) efficiency.The MAX1644 is a step-down switching regulator with an in...
Vendor:Other Category:Other
The MAX1642/MAX1643 are high-efficiency, low-voltage, step-up DC-DC converters intended for devices powered by a single alkaline cell. They feature low quiescent supply currents and are supplied in the ultra-small MAX pa...
Vendor:Other Category:Other
The MAX1642/MAX1643 are high-efficiency, low-voltage, step-up DC-DC converters intended for devices powered by a single alkaline cell. They feature low quiescent supply currents and are supplied in the ultra-small MAX pa...
Vendor:Other Category:Other
The MAX1640/MAX1641 CMOS, adjustable-output, switch-mode current sources operate from a +5.5V to +26V input, and are ideal for microprocessor-controlled battery chargers. Charging current, maximum output voltage, and pul...
Vendor:Other Category:Other
The MAX1640/MAX1641 CMOS, adjustable-output, switch-mode current sources operate from a +5.5V to +26V input, and are ideal for microprocessor-controlled battery chargers. Charging current, maximum output voltage, and pul...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The MAX1639 is an ultra-high-performance, step-down DC-DC controller for CPU power in high-end computer systems. Designed for demanding applications in which output voltage precision and good transient response are criti...
Vendor:Other Category:Other
The MAX1638VRM evaluation kit (EV kit) provides a digitally programmable output voltage between 1.3V and 3.5V from a 5V input supply. It delivers up to 14A output current with greater than 90% efficiency. The MAX1638 fea...
Mfg:MAXIM Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The MAX1638 is an ultra-high-performance, step-down DC-DC controller for CPU power in high-end computer systems. Designed for demanding applications in which output voltage precision and good transient response are criti...
Vendor:Other Category:Other
The MAX1637 synchronous, buck, switch-mode powersupply controller generates the CPU supply voltage in battery-powered systems. The MAX1637 is a strippeddown version of the MAX1636 in a smaller 16-pin QSOP package. The MA...
Vendor:Other Category:Other
The MAX1636 is a synchronous, buck, switch-mode, power-supply controller that generates the CPU supply voltage in battery-powered systems. It achieves ±1% output voltage accuracy and offers the excellent loadtransient re...
Vendor:Other Category:Other
The MAX1630AMAX1635A are buck-topology, stepdown, switch-mode, power-supply controllers that generate logic-supply voltages in battery-powered systems.These high-performance, dual-/triple-output devices include on-board ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.