About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
MAX367,MAX3669ETG,MAX3395E,
MAX367
Vendor:Other Category:Other
The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply vol...MAX3669ETG
Mfg:MAXIM Pack:TQFP D/C:8 Vendor:Other Category:Other
The MAX3669ETG evaluation kit (EV kit) is an assembled demonstration board that provides easy optical or electrical evaluation of the MAX3669ETG, a 622Mbps laser driver with current monitors and automatic power control (...MAX3669
Vendor:Other Category:Other
The MAX3669 evaluation kit (EV kit) is an assembled demonstration board that provides easy optical or electrical evaluation of the MAX3669, a 622Mbps laser driver with current monitors and automatic power control (APC) c...MAX3668†
Vendor:Other Category:Other
The MAX3668† is a complete, +3.3V laser driver with automatic power control (APC) circuitry for SDH/SONET applications up to 622Mbps. MAX3668† accepts differential PECL inputs, provides bias and modulation cu...MAX3668
Vendor:Other Category:Other
The MAX3668 evaluation kit (EV kit) is an assembled, surface-mount demonstration board that provides easy optical or electrical evaluation of the MAX3668. Although the MAX3668 evaluation kit is shipped in the electrical ...MAX3667
Vendor:Other Category:Other
The MAX3667 is a complete, +3.3V laser driver with automatic power control (APC), designed for SDH/ SONET applications up to 622Mbps. It accepts differential PECL inputs, provides single-ended bias and modulation current...MAX3665
Vendor:Other Category:Other
The MAX3665 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 70mW at VCC = 3.3V. Operating from a single +3.3V or +5.0V supply, it converts a small photodiode current to a measurable...MAX3664
Mfg:MAXIM Pack:SMD D/C:02+ Vendor:Other Category:Other
The MAX3664 low-power transimpedance preamplifier for 622Mbps SDH/SONET applications consumes only 85mW. Operating from a single +3.3V supply, it converts a small photodiode current to a measurable differential voltage. ...MAX3663
Vendor:Other Category:Other
The MAX3663 evaluation kit (EV kit) is an assembled demonstration board that provides easy optical or electrical evaluation of the MAX3663, a 622Mbps laser driver with current monitors and automatic power control (APC) c...MAX366
Mfg:MAXIM Pack:DIP-8 D/C:95+ Vendor:Other Category:Other
The MAX366 and MAX367 are multiple, two-terminal circuit protectors. Placed in series with signal lines, each two-terminal device guards sensitive circuit components against voltages near and beyond the normal supply vol...MAX3658A
Vendor:Other Category:Other
The MAX3658A evaluation kit is a fully assembled electrical demonstration kit that provides easy evaluation of the MAX3658A 622Mbps +3.3V trans-impedance amplifier. Note that the MAX3658A evaluation kit provides an elec...MAX3658
Vendor:Other Category:Other
The MAX3658 is a transimpedance preamplifier for receivers operating up to 622Mbps. Low noise, high gain, and low power dissipation make it ideal for fiber access and small form-factor transceivers.The MAX3658 features 4...MAX3657
Vendor:Other Category:Other
The MAX3657 is a transimpedance preamplifier for receivers operating up to 155Mbps. The low noise, high gain, and low-power dissipation make it ideal for Class-B and Class-C passive optical networks (PONs). The MAX3657 f...MAX3656ETG
Mfg:MAXIM Pack: DICE D/C:8 Vendor:Other Category:Other
The MAX3656ETG is a burst-mode laser driver that operates at data rates from 155Mbps up to 2.5Gbps. The laser driver accepts either positive-referenced emittercoupled logic (PECL) or current-mode logic (CML) data inputs ...MAX3656E
Vendor:Other Category:Other
The MAX3656E is a burst-mode laser driver that operates at data rates from 155Mbps up to 2.5Gbps. The laser driver accepts either positive-referenced emittercoupled logic (PECL) or current-mode logic (CML) data inputs an...MAX3656D
Vendor:Other Category:Other
The MAX3656D is a burst-mode laser driver that operates at data rates from 155Mbps up to 2.5Gbps. The laser driver accepts either positive-referenced emittercoupled logic (PECL) or current-mode logic (CML) data inputs an...MAX3656
Vendor:Other Category:Other
The MAX3656 is a burst-mode laser driver that operates at data rates from 155Mbps up to 2.5Gbps. The laser driver accepts either positive-referenced emittercoupled logic (PECL) or current-mode logic (CML) data inputs and...MAX3654ETE+
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC AMP TRANSIMPEDANCE 16-TQFNThe MAX3654ETE+ analog transimpedance amplifier (TIA) is designed for CATV applications in fiber-to-the-home(FTTH) networks. This high-linearity amplifier MAX3654ETE+ is intended for 47MHz to 870MHz subcarrier multiplexe...MAX365
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX364/MAX365 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (NC), and the MAX365 has four normally open (NO) switches. Both parts offer lowchannel on resist...MAX3646
Vendor:Other Category:Other
The MAX3646 is a +3.3V laser driver designed for multirate transceiver modules with data rates from 155Mbps to 622Mbps. Lasers can be DC-coupled to the MAX3646 for reduced component count and ease of multirate operation....MAX3643
Vendor:Other Category:Other
The MAX3643 is designed as one kind of 155Mbps to 2.5Gbps burst-mode laser driver device that can be used in (1)A/B/G/XGPON ONT Modules Up to 2.5Gbps; (2)1.25Gbps IEEE EPON ONT Modules applications. And this device is pa...MAX3640
Pack:MAX D/C:BGA Vendor:Other Category:Other
The MAX3640 is a dual-path crosspoint switch for use at OC-12 data rates. The MAX3640 can be used to receive and transmit 622Mbps low-voltage differentialsignals (LVDS) across a backplane with minimum jitter accumulation...MAX364
Mfg:MAX Pack:SOP-16 D/C:04/05 Vendor:Other Category:Other
The MAX364/MAX365 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX364 has four normally closed (NC), and the MAX365 has four normally open (NO) switches. Both parts offer lowchannel on resist...MAX3634
Vendor:Other Category:Other
The MAX3634 burst-mode clock phase aligner (CPA) is designed specifically for 622Mbps or 1244Mbps GPON (ITU G.984) optical line terminal (OLT) receiver applications. The MAX3634 provides clock and clock-aligned resynchro...MAX3620
Vendor:Other Category:Other
The MAX3620 series is a family of high-performance passive delay lines for use in QDR/QDRII synchronous memory systems. These delay lines support high-speed transceiver logic (HSTL) source terminated transmission with an...MAX362
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX361/MAX362 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX361 has four normally closed (NC) switches, and the MAX362 has four normally open (NO) switches. Both parts offer low channel...MAX361
Mfg:MAX Pack:SOP-16 D/C:05 Vendor:Other Category:Other
The MAX361/MAX362 are precision, quad, single-pole single-throw (SPST) analog switches. The MAX361 has four normally closed (NC) switches, and the MAX362 has four normally open (NO) switches. Both parts offer low channel...MAX3573
Vendor:Other Category:Other
The MAX3573 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX3571
Vendor:Other Category:Other
The MAX3571 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX3570
Vendor:Other Category:Other
The MAX3570 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX3553
Vendor:Other Category:Other
The MAX3553 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX3551
Vendor:Other Category:Other
The MAX3551 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX3550
Vendor:Other Category:Other
The MAX3550 evaluation kits (EV kits) simplify evaluation of the MAX355X/MAX357X broadband dual-conversion tuner ICs. They enable testing of the devices' performance and require no additional support circuitry. The MAX35...MAX355
Vendor:Other Category:Other
The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and f...MAX3540
Vendor:Other Category:Other
The MAX3540 complete single-conversion television tuner is designed for use in analog/digital terrestrial applications and digital set-top boxes. This television tuner draws only 760mW of power from a +3.3V supply voltag...MAX354
Vendor:Other Category:Other
The MAX354/MAX355 fault-protected multiplexers (muxes) use a series N-channel, P-channel, N-channel structure that protects the devices from overvoltage up to 40V beyond the supply rails during power-up, powerdown, and f...MAX3538
Vendor:Other Category:Other
The MAX3537/MAX3538 broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable™ set-tops and televisions. These devices feature a unique design that integrates a dual-band (UHF and VHF) inpu...MAX3537
Vendor:Other Category:Other
The MAX3537/MAX3538 broadband RF variable-gain amplifiers (VGA) are designed for digital and OpenCable™ set-tops and televisions. These MAX3537 feature a unique design that integrates a dual-band (UHF and VHF) inpu...MAX3535E/MXL1535E
Vendor:Other Category:Other
The MAX3535E/MXL1535E isolated RS-485/RS-422 full duplex transceivers provide 2500VRMS of galvanic isolation between the RS-485/RS-422 side and the processor or control logic side. These devices allow fast,1000kbps commu...MAX3532
Vendor:Other Category:Other
The MAX3532 is a programmable power amplifier for use in upstream cable applications. The device outputs up to 62dBmV (continuous wave) through a 1:2 (voltage ratio) transformer when driven with 36dBmV at its input. MAX3...MAX353
Vendor:Other Category:Other
The MAX353 are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. Al...MAX3524
Vendor:Other Category:Other
The MAX3524 broadband amplifier is designed specifically for cable television receiver and cable modem applications. The MAX3524 is a single-ended input, differential- output low-noise amplifier (LNA) that offers 15dB of...MAX352
Vendor:Other Category:Other
The MAX352 are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351 has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switches. Al...MAX351ESE
Mfg:MAXIM Pack:SO D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SWITCH QUAD SPST 16SOICThe MAX351ESE are precision, quad,single-pole single-throw (SPST) analog switches. The MAX351ESE has four normally closed (NC), and the MAX352 has four normally open (NO) switches. The MAX353 has two NO and two NC switch...MAX3517
Mfg:MAX Pack:SMD D/C:O1/O2 Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...MAX3516
Mfg:MAX Pack:SMD Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...MAX3514
Mfg:MAX Pack:SMD Vendor:Other Category:Other
The MAX3514/MAX3516/MAX3517 programmable-gain amplifiers are designed for use in CATV upstream applications. The MAX3514/MAX3517 drive up to +61dBmV (QPSK) into a 75 load when driven with a +34dBmV nominal input signal. ...MAX3510
Mfg:MAXIM Pack:SOP D/C:09+ Vendor:Other Category:Other
The MAX3510 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 64dBmV (continuous wave) through a 2:1 (voltage ratio) transformer. It features variable gain controlled by a ...MAX3509QL3BB
Vendor:Other Category:Other
The MAX3509QL3BB is one member of the MAX3509 family which is designed as the programmable power amplifier that can be used in (1)Telephony over Cable ; (2)CATV Status Monitor; (3)OPENCATV Set-Top Box ; (4)CATV Infrastru...MAX3509
Vendor:Other Category:Other
The MAX3509 is a programmable power amplifier for use in CATV upstream applications. The device outputs up to 66dBmV QPSK through a 1:1 transformer. It features variable gain controlled by a 3-wire digital serial bus. Ga...MAX3507
Vendor:Other Category:Other
The MAX3507 is a variable-gain power amplifier for use in CATV upstream transmitters. The variable-gain feature has 55dB of dynamic range and is controlled by a 3-wire SPI™ bus. The MAX3507 is capable of generating...MAX3505
Vendor:Other Category:Other
The MAX3503/MAX3505 evaluation kits (EV kits) simplify evaluation of the MAX3503 and MAX3505 CATV upstream amplifiers. The kits include a data interface that can be programmed through the parallel port of a standard PC.S...MAX3503
Mfg:MAX D/C:O2 Vendor:Other Category:Other
The MAX3503/MAX3505 evaluation kits (EV kits) simplify evaluation of the MAX3503 and MAX3505 CATV upstream amplifiers. The kits include a data interface that can be programmed through the parallel port of a standard PC.S...MAX350
Mfg:MAXIM Pack:SSOP D/C:8 Vendor:Other Category:Other
The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100½ max) is matched between switches to 16½...MAX3491E
Mfg:MAXIM Pack:02+ D/C:SOP-14 Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...MAX3491
Mfg:SOP-14 Pack:MAXIM D/C:0210+ Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX3490E
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...MAX3490
Mfg:MAX Pack:SOP-8 D/C:05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX349
Mfg:MAXIM Pack:SSOP D/C:8 Vendor:Other Category:Other
The MAX349/MAX350 are 8-channel and dual 4-channel serially controlled multiplexers (muxes). These muxes conduct equally well in either direction. On-resistance (100½ max) is matched between switches to 16½...MAX3488E
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...MAX3488
Mfg:MAX Pack:DIP8 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX3486E
Mfg:DIP Pack:MAXIM D/C:04+ Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...MAX3486
Mfg:MAX Pack:SOP-8 D/C:05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX3485E
Mfg:MAX Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each MAX3485E contains one driver and o...MAX3485CPA+
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS485/422 250KBPS 8-DIPThe MAX3485CPA+ is one member of the MAX3485 family which is designed as the 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)telec...MAX3485CPA
Vendor:Other Category:Other
The MAX3485CPA is designed as one kind of 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)telecommunications; (3)transceivers for ...MAX3485
Mfg:MAX Pack:SOP-8 D/C:04/05 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX3483E
Vendor:Other Category:Other
Devices in the MAX3483E family (MAX3483E/MAX3485E/ MAX3486E/MAX3488E/MAX3490E/MAX3491E) are ±15kV ESD-protected, +3.3V, low-power transceivers for RS-485 and RS-422 communications. Each device contains one driver and one...MAX3483CSA+T
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS485/422 250KBPS 8-SOICThe MAX3483CSA+T is one member of the MAX3483 family which is designed as the 3.3V-powered, 10Mbps and slew-rate-limited true RS-485/RS-422 transceiver that can be used in (1)low-power RS-485/RS-422 transceivers; (2)tele...MAX3483
Mfg:MAX Pack:SOP-8 D/C:04 Vendor:Other Category:Other
The MAX3483, MAX3485, MAX3486, MAX3488, MAX3490, and MAX3491 are 3.3V, low-power transceivers for RS-485 and RS-422 communication. Each part contains one driver and one receiver. The MAX3483 and MAX3488 feature slew-rate...MAX3480EB
Vendor:Other Category:Other
The MAX3480EB are electrically isolated RS-485/RS-422 data-communications interfaces. The RS-485/RS-422 I/O pins are protected against ±15kV electrostatic discharge (ESD) shocks, without latchup.Transceivers, optocoupler...MAX3480EA
Vendor:Other Category:Other
The MAX3480EA are electrically isolated RS-485/RS-422 data-communications interfaces. The RS-485/RS-422 I/O pins are protected against ±15kV electrostatic discharge (ESD) shocks, without latchup.Transceivers, optocoupler...MAX3480
Vendor:Other Category:Other
The MAX3480A/MAX3480B are electrically isolated RS-485/RS-422 data-communications interfaces.Transceivers, optocouplers, and a transformer are all included in one low-cost, 28-pin DIP package. A single+3.3V supply on the...MAX3471
Vendor:Other Category:Other
The MAX3471 half-duplex transceiver is intended for lithium battery-powered RS-485/RS-422 applications. It draws only 1.6µA (typical) supply current from a 3.6V supply with the receiver enabled and the driver disab...MAX3469
Vendor:Other Category:Other
The MAX3469 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3469 complies with the P...MAX3468
Vendor:Other Category:Other
The MAX3468 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3468 complies with the P...MAX3467
Vendor:Other Category:Other
The MAX3467 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3467 complies with the P...MAX3466
Vendor:Other Category:Other
The MAX3466 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3466 complies with the P...MAX3465
Vendor:Other Category:Other
The MAX3465 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3465 complies with the P...MAX3464
Vendor:Other Category:Other
The MAX3464 are high-speed differential bus transceivers for RS-485 and RS-422 communications. MAX3464 are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver complies with the Profib...MAX3460
Vendor:Other Category:Other
The MAX3460MAX3464 are high-speed differential bus transceivers for RS-485 and RS-422 communications. They are designed to meet TIA/EIA-422-B, TIA/EIA-485-A, V.11, and X.27 standards. The transceiver MAX3460MAX3464 compl...MAX3456E
Vendor:Other Category:Other
The MAX3453EMAX3456E ±15kV ESD-protected USBcompliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds....MAX3453E_1280213
Vendor:Other Category:Other
The MAX3453E_1280213 ±15kV ESD-protected USB- compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speed...MAX3453E
Vendor:Other Category:Other
The MAX3453EMAX3456E ±15kV ESD-protected USBcompliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds....MAX3452E
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...MAX3451E
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...MAX3450E
Mfg:MAXIM Vendor:Other Category:Other
The MAX3450E/MAX3451E/MAX3452E USB-compliant transceivers interface low-voltage ASICs with USB devices. The devices fully comply with USB 1.1 and USB 2.0 when operating at full (12Mbps) and low (1.5Mbps) speeds. The MAX3...MAX3444E
Vendor:Other Category:Other
The MAX3440EMAX3444E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one ...MAX3442E
Vendor:Other Category:Other
The MAX3442E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one differen...MAX3441E
Vendor:Other Category:Other
The MAX3441E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one differen...MAX3440E
Vendor:Other Category:Other
The MAX3440EMAX3444E fault-protected RS-485 and J1708 transceivers feature ±60V protection from signal faults on communication bus lines. Each device contains one differential line driver with three-state output and one ...MAX3430CSA+
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC TXRX RS-485 3.3V 8-SOICThe MAX3430CSA+ is one member of the MAX3430 series.The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communication bus lines. Each device contains one driver and o...MAX3430
Vendor:Other Category:Other
The MAX3430 fault-protected RS-485 transceiver features ±80V protection from overvoltage signal faults on communicationm bus lines. Each device contains one driver and one receiver, and the output pins can withstand faul...MAX3420E
Vendor:Other Category:Other
The MAX3420E contains the digital logic and analog circuitry necessary to implement a full-speed USB peripheral compliant to USB specification rev 2.0. A built-in full-speed transceiver features ±15kV ESD protection and ...MAX3408
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...MAX3407
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...MAX3406
Vendor:Other Category:Other
The MAX3406/MAX3407/MAX3408 are general-purpose line-terminating networks designed to change the termination value of a line, depending on the state of a digital control line, allowing the connection to a coaxial cable o...MAX3397E
Vendor:Other Category:Other
The MAX3397E features a shutdown mode that reduces supply current to less than 1A, thermal short-circuit protection, and ±15kV ESD protection on the VCC side for greater protection in applications that route signals exte...MAX3396E
Vendor:Other Category:Other
The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA curr...MAX3395E
Vendor:Other Category:Other
The MAX3394E/MAX3395E/MAX3396E bidirectional level translators provide level shifting required for data transfer in a multivoltage system. Internal slew-rate enhancement circuitry features 10mA current-sink and 15mA curr...