About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
HVC190,HVC145,HV78,
HVC190
Vendor:Other Category:Other
HVC145
Vendor:Other Category:Other
HVC142A
Mfg:renesas/Hitachi Pack:SOD323 D/C:2005 Vendor:Other Category:Other
HVC136
Vendor:Other Category:Other
HVC135
Vendor:Other Category:Other
HVC134
Vendor:Other Category:Other
HVC133A
Vendor:Other Category:Other
HVC133
Vendor:Other Category:Other
HVC132
Vendor:Other Category:Other
HVC131
Vendor:Other Category:Other
HVB387BWK
Mfg:HITACH1 Pack:SOT-323 D/C:05+ Vendor:Other Category:Other
HVB350BYP
Vendor:Other Category:Other
HVB27WK
Vendor:Other Category:Other
HVB190S
Vendor:Other Category:Other
HVB187YP
Vendor:Other Category:Other
HVB14S
Mfg:HITACHI Pack:SMD D/C:2008+ Vendor:Other Category:Other
HV-AT
Vendor:Other Category:Other
65GHz Attenuators for HV connectorsHV9982
Vendor:Other Category:Other
The HV9982 is a three-channel, closed loop, peak current mode PWM controller for driving a constant output current. It can be used for driving either RGB LEDs or multiple channels of white LEDs.The HV9982 includes a 40V ...HV9980
Vendor:Other Category:Other
The HV9980 is a fully integrated 3-channel peak-current PWM controller for driving buck converters in constant output current mode. It is optimized for use with a large array of 20~80mA LED strings, where multiple ICs ar...HV9930
Mfg:Supertex Pack:SOP-8 D/C:07+ Vendor:Other Category:Other
The HV9930 is a variable frequency PWM controller IC designed to control an LED lamp driver using a low noise boost-buck (Cuk) topology. It uses hystereticcurrent mode control to regulate both the input and the output cu...HV9925
Mfg:SUPERTEX D/C:08+ Vendor:Other Category:Other
The HV9925 is a pulse width modulated (PWM) high-effi ciency LED driver control IC with PWM dimming capabilities. It allows effi cient operation of high brightness LED strings from voltage sources ranging up to 400VDC. I...HV9923
Vendor:Other Category:Other
The HV9921/22/HV9923 are pulse width modulated (PWM) high-effi ciency LED driver control ICs. They allow effi cient operation of LED strings from voltage sources ranging up to 400VDC. The HV9921/22/23 include an internal...HV9922
Vendor:Other Category:Other
The HV9921/HV9922/23 are pulse width modulated (PWM) high-effi ciency LED driver control ICs. They allow effi cient operation of LED strings from voltage sources ranging up to 400VDC. The HV9921/22/23 include an internal...HV9921
Mfg:SUPERTEX Pack:TO-92 D/C:07+ Vendor:Other Category:Other
The HV9921/22/23 are pulse width modulated (PWM) high-effi ciency LED driver control ICs. They allow effi cient operation of LED strings from voltage sources ranging up to 400VDC. The HV9921/22/23 include an internal hig...HV9912
Vendor:Other Category:Other
The HV9912 is a current mode control LED driver IC designed to control single switch PWM converters (buck, boost, buck-boost or SEPIC) in a constant frequency mode. The controller uses a peak current-mode control scheme ...HV9911
Mfg:sop supertex 08+ D/C:08+ Vendor:Other Category:Other
The HV9911 is a current mode control LED driver IC designed to control single switch PWM converters (buck, boost, buck-boost, or SEPIC), in a onstant frequency or constant off-time mode. The controller uses a peak curren...HV9910DB6
Vendor:Other Category:Other
The Supertex HV9910DB6 is a simple, constant-current, LED driver evaluation board designed to drive OSRAM's 6-chip or 4-chip OSTAR™ from a 24V supply.The board HV9910DB6 uses the Supertex HV9910B in a buck confi gu...HV9910BLG
Vendor:Other Category:Other
The HV9910BLG is dsigned as an open loop current mode control LED driver IC. It can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8 to 450V linear regulator which allow...HV9910B
Vendor:Other Category:Other
The HV9910B is an open loop, current mode, control LED driver IC. It can be programmed to operate in either a constant frequency or constant off-time mode. It includes an 8.0 - 450V linear regulator which allows it to wo...HV9910
Vendor:Other Category:Other
The HV9910 is a PWM high-effi ciency LED driver control IC.HV9910 allows effi cient operation of High Brightness (HB) LEDs from voltage sources ranging from 8VDC up to 450VDC.The HV9910 controls an external MOSFET at fi ...HV9906DB4
Vendor:Other Category:Other
The HV9906DB4 provides a constant current of 750mA. It contains all circuitry necessary to demonstrate the features of the HV9906 second order power supply controller. A power converter of the demo board consists of an i...HV9906DB3
Vendor:Other Category:Other
The Supertex HV9906DB3 demo board is a power factor corrected (PFC) LED driver using the HV9906 IC. A power converter of the demo board consists of an input buck-boost stage and an output buck stage. The output voltage p...HV9906DB
Vendor:Other Category:Other
The Supertex HV9906DB2 demo board contains all circuitry necessary to demonstrate the features of the HV9906 second order power supply controller. The power converter of the demo board consists of an input buck-boost sta...HV9906
Mfg:HI Pack:DIP-8 D/C:0227+ Vendor:Other Category:Other
The Supertex HV9906 allows the development of the smallest possible, most reliable, offline and wide DC/DC conversion range converters for driving LEDs and other applications. The HV9906 combines internally all the compo...HV9904
Vendor:Other Category:Other
The Supertex HV9904 is a second order PWM controller designed to provide a constant average current output or a constant average voltage output from an input of 10V to 400V DC or directly from rectified AC mains up to 28...HV9903
Vendor:Other Category:Other
The Supertex HV9903 is a fixed frequency DC-DC boost converter designed for driving Light Emitting Diodes (LEDs) with constant current where the light intensity is proportional to the current through them. The input supp...HV9901DB1
Vendor:Other Category:Other
The HV9901DB1 is a universal relay driver employing PWM switching techniques utilizing the relay coil's inductance to provide efficient operation over a wide supply voltage range. Relay drive is constant-current. Pull-i...HV9901
Vendor:Other Category:Other
The Supertex HV9901 is a BiCMOS/DMOS universal relay driver that employs PWM switching techniques. It is designed for efficient and energy-saving operation of a low voltage relay with supply voltages ranging from 8 to 45...HV9808
Vendor:Other Category:Other
The HV97 and HV9808 are low-voltage serial to high-voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...HV98
Vendor:Other Category:Other
The HV97 and HV98 are low-voltage serial to high-voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ap...HV9708
Vendor:Other Category:Other
The HV9708 and HV98 are low-voltage serial to high-voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...HV9608
Vendor:Other Category:Other
The HV9608 provides a single chip, optimized peak current mode control solution for design of high performance PWM converters using the active-clamp transformer flux reset. Due to its programmable slope compensation feat...HV9606DB1
Vendor:Other Category:Other
The Supertex HV9606DB1 evaluation board demonstrates the features of HV9606 IC by presenting a DC/DC converter employing flyback technique to achieve multiple outputs:• 3.3V non-isolated output with ± 1% accuracy. ...HV9606
Pack:2008 Vendor:Other Category:Other
The HV9606 PWM controller allows the design of high efficiency (>90%) power supplies for distributed board mounted power (BMP) applications. Due to its high frequency capability it can provide high currents (20A @ 3.3...HV9605C
Vendor:Other Category:Other
The Supertex HV9605C is a BiCMOS/DMOS single-output, current mode, pulse width modulator IC designed to meet the requirements of ETR-080 for ISDN applications. In a 14 pin package, it provides all the necessary functions...HV9605
Mfg:HV Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The Supertex HV9605 is a BiCMOS/DMOS single-output, current mode, pulse width modulator IC designed to meet the requirements of ETR-060 for ISDN applications. In a 14 pin package, it provides all the necessary functions ...HV9408
Vendor:Other Category:Other
The HV93 and HV9408 are low voltage serial to high voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...HV9308
Vendor:Other Category:Other
The HV9308 and HV94 are low voltage serial to high voltage parallel converters with push-pull outputs. These devices have been designed for use as drivers for AC-electroluminescent displays. They can also be used in any ...HV9123
Vendor:Other Category:Other
The Supertex HV9120 and HV9123 are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input, from a 12V battery to a rectified and filtered 240V AC line. They contain...HV9120
Mfg:HV Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The Supertex HV9120 and HV9123 are Switch Mode Power Supply (SMPS) controller subsystems that can start and run directly from almost any DC input, from a 12V battery to a rectified and filtered 240V AC line. They contain...HV9113
Vendor:Other Category:Other
The Supertex HV9110 through HV9113 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary ...HV9112
Vendor:Other Category:Other
The Supertex HV9110 HV9112 HV9113 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary t...HV9110
Vendor:Other Category:Other
The Supertex HV9110 through HV9113 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary ...HV9108
Vendor:Other Category:Other
The Supertex HV9105 and HV9108 are high-efficiency high voltage SMPS ICs intended for use in power converters requiring extreme efficiency at output power levels of 5.0W or less. The low supply current (0.5mA max) allows...HV9105
Vendor:Other Category:Other
The Supertex HV9105 and HV9108 are high-efficiency high voltage SMPS ICs intended for use in power converters requiring extreme efficiency at output power levels of 5.0W or less. The low supply current (0.5mA max) allows...HV9103
Vendor:Other Category:Other
The Supertex HV9100 through HV9103 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary ...HV9102
Vendor:Other Category:Other
The Supertex HV9100 HV9102 HV9103 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary t...HV9100
Vendor:Other Category:Other
The Supertex HV9100 through HV9103 are a series of BiCMOS/ DMOS single-output, pulse width modulator ICs intended for use in high-speed high-efficiency switchmode power supplies. They provide all the functions necessary ...HV895
Vendor:Other Category:Other
The HV895 is designed to drive liquid lenses of up to 200pF with a 1.5kHz waveform at amplitudes up to 60VRMS, controlled via an I2C interface. A single byte (AMP) written to the HV895 controls the operation of the drive...HV892
Vendor:Other Category:Other
The HV892 liquid lens driver is controlled via an I2C interface, is capable of driving capacitive loads of up to 200pF, and is compatible with 40VRMS to 60VRMS lenses.A single byte (AMP) written to the HV892 controls the...HV861
Vendor:Other Category:Other
The Supertex HV861 is a low noise, dimmable, high voltage, dual EL Lamp driver designed for driving two electroluminescent (EL) Lamps with a combined area of 5.0 square inches. The input supply voltage range is from 2.5V...HV860
Mfg:SUPER D/C:05+ Vendor:Other Category:Other
The Supertex HV860 is a high voltage driver designed for driving Electroluminescent, (EL), lamps of up to 5 square inches. The input supply voltage range is from 2.5V to 4.5V. The device uses a single inductor and a mini...HV859
Mfg:SUP Pack:MSOP D/C:05+ Vendor:Other Category:Other
The Supertex HV859 is a high voltage driver designed for driving Electroluminescent (EL) lamps of up to 5 square inches. The input supply voltage range is from 1.8V to 5.0V. The device uses a single inductor and a minimu...HV858
Mfg:SUPER D/C:05+ Vendor:Other Category:Other
The Supertex HV858 is a high voltage triple EL lamp driverdesigned for driving combined EL lamps of up to 3.0 in2 (1.0 in2 each). The input supply voltage range is from 1.8V to 6.5V. The device is designed such that the ...HV857L
Pack:2008 Vendor:Other Category:Other
The Supertex HV857L is a low noise, high voltage driver designed for driving Electroluminescent (EL) lamps of up to fi ve square inches. It is the low noise version of the EL lamp driver HV857. The input supply voltage r...HV857DB1
Vendor:Other Category:Other
The Supertex HV857DB1 demo board contains all necessary circuitry to demonstrate the features of the HV857 EL lamp driver.Simply connect HV857DB1 to a power supply and a lamp. For additional assistance in designing EL dr...HV857
Mfg:530 Pack:MSOP-8 D/C:00+ Vendor:Other Category:Other
The Supertex HV857 is a high voltage driver designed for driving Electroluminescent (EL) lamps of up to 5 square inches. The input supply voltage range is from 1.8V to 5.0V. The device uses a single inductor and a minimu...HV856
Vendor:Other Category:Other
The Supertex HV856 is a high voltage, triple EL lamp driver designed for driving combined EL lamps of up to 3.0in2 (1.0 in2 each). It is a higher voltage version of the HV858. The input supply voltage range is from 1.8V ...HV853
Vendor:Other Category:Other
The Supertex HV853 is a high voltage, low noise EL (electroluminescent) lamp driver. It is the low noise version of the HV852 with improved EMI performance, operating over an input voltage range of 3.2V to 5.0V. It is de...HV852DB1
Vendor:Other Category:Other
The Supertex HV852DB1 demo board contains all necessary circuitry to demonstrate the features of the HV852 EL lamp driver.Simply connect it to a power supply and a lamp, as shown below. For additional assistance in imple...HV852
Vendor:Other Category:Other
The Supertex HV852 is a high voltage, low noise, inductorless EL (electroluminescent) lamp driver. It is designed to drive EL lamps of up to 1.5in2, with capacitive values up to 5.3nF over an input voltage range of 2.4V...HV850
Pack:2008 Vendor:Other Category:Other
Supertex HV850 is a high voltage electroluminescent (EL) Lamp Driver IC. It is designed to drive EL lamps of up to 2.0in2, with capacitive values up to 4.5nF. It converts a low voltage DC input to a high voltage AC outpu...HV845DB1
Vendor:Other Category:Other
The Supertex HV845DB1 demo board contains all necessary circuitry to demonstrate the features of the HV845 dual EL lamp driver.Simply connect HV845DB1 to a power supply and a lamp as shown below. For additional assistanc...HV845
Vendor:Other Category:Other
The Supertex HV845 is a low noise, high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce th...HV843DB1
Vendor:Other Category:Other
The Supertex HV843DB1 demo board contains all necessary circuitry to demonstrate the features of dual EL lamp driver. Simply connect HV843DB1 to a power supply and a lamp as shown below. For additional assistance in e...HV843
Vendor:Other Category:Other
The Supertex HV843 is a low noise, high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V.The device HV843 is designed to redu...HV841
D/C:05+ Vendor:Other Category:Other
The Supertex HV841 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce the amount of...HV839
D/C:05+ Vendor:Other Category:Other
The Supertex HV839 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce the amount of...HV835
Vendor:Other Category:Other
The Supertex HV835 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.8V. The device is designed to reduce the amount of...HV833DB1
Vendor:Other Category:Other
The Supertex HV833DB1 demo board contains all necessary circuitry to demonstrate the features of the HV833 EL lamp driver.Simply connect HV833DB1 to a power supply and a lamp as shown below. For additional assistance in...HV833
Mfg:HV Pack:MSOP-8 D/C:04+ Vendor:Other Category:Other
The Supertex HV833 is a high voltage driver designed for driving EL lamps of up to 35nF (10-12in2). The input supply voltage range is from 1.8V to 6.5V. The device uses a single inductor and a minimum number of passive c...HV832DB1
Vendor:Other Category:Other
The Supertex HV832DB1 demo board contains all necessary circuitry to demonstrate the features of the HV832 dual EL lamp driver.Simply connect HV832DB1 to a power supply and a lamp as shown below. For additional assistanc...HV832
Vendor:Other Category:Other
The Supertex HV832 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of...HV831
Mfg:Supertex Pack:SOP D/C:2004 Vendor:Other Category:Other
The Supertex HV831 is a high voltage driver designed for driving two EL lamps with a combined area of 3.5 square inches. The input supply voltage range is from 2.0V to 5.0V. The device is designed to reduce the amount of...HV830
Mfg:SUPERTEX Pack:SOP8 Vendor:Other Category:Other
The Supertex HV830 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0...HV829B
Vendor:Other Category:Other
The Supertex HV829A/HV829B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices HV829B use a single...HV829A
Vendor:Other Category:Other
The Supertex HV829A/B are high voltage EL lamp driver integrated circuits designed for driving EL lamps of up to 70nF at 1000Hz. The input supply voltage range is from 2.7V to 5.5V. These devices use a single inductor, a...HV826
Pack:SMD-8 Vendor:Other Category:Other
The Supertex HV826 is a high voltage driver designed for driving EL lamps. The input supply voltage range is from 1.8V to 3.5V. The device uses a single inductor and a minimum number of passive components. The nominal re...HV825
Pack:SOP Vendor:Other Category:Other
The Supertex HV825 is a high voltage driver designed for driving EL lamps typically up to 6nF. The input supply voltage range is from 1.0V to 1.6V. The device uses a single inductor and a minimum number of passive compon...HV824
Mfg:SUPERTEX Pack:SMD Vendor:Other Category:Other
The Supertex HV824 is a high voltage driver designed to drive EL lamps with capacitive loads of 2nF to 15nF. The input supply voltage range is 1.0V to1.6V. The device uses a single inductor and a minimum number of passiv...HV823
Mfg:SUPERTEXINC Pack:SSOP8 Vendor:Other Category:Other
The Supertex HV823 is a high-voltage driver designed for driving EL lamps of up to 50nF. EL lamps greater than 50nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.0...HV809LG-G
Mfg:SUPERTEX Pack:SOP-8 D/C:06+ Vendor:Other Category:Other
The Supertex HV809LG-G is an off-line, high voltage, EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectifi ed nominal 120V AC source or any oth...HV809
Mfg:SUPERTEX Pack:3.9mm Vendor:Other Category:Other
The Supertex HV809 is an off-line high voltage EL lamp driver integrated circuit designed for driving EL lamps of up to 350nF at 400Hz. The input supply voltage can be a rectified nominal 120V AC source or any other DC s...HV8053
Mfg:SUPERTEX Pack:SOP8 Vendor:Other Category:Other
The Supertex HV8051 and HV8053 are high-voltage drivers designed for driving EL lamps of typically 4nF and 12nF for a 1V and 3V operation. The input supply voltage range is from 1.0V to 1.6V for HV8051 and 2.4V to 3.5V f...HV8051
Vendor:Other Category:Other
The Supertex HV8051 and HV8053 are high-voltage drivers designed for driving EL lamps of typically 4nF and 12nF for a 1V and 3V operation. The input supply voltage range is from 1.0V to 1.6V for HV8051 and 2.4V to 3.5V f...HV803
Mfg:SUPERT Pack:SMD Vendor:Other Category:Other
The Supertex HV803 is a high-voltage driver designed for driving EL lamps of up to 30nF. EL lamps greater than 30nF can be driven for applications not requiring high brightness. The input supply voltage range is from 2.4...HV7802
Vendor:Other Category:Other
The HV7802 high side current monitor IC contains a transconductance amplifi er which translates a high side current measurement voltage into an output current with resistor programmable transconductance gain. An op...HV7801
Vendor:Other Category:Other
The HV7801 high side current monitor IC transfers a highside current measurement voltage to its ground referenced output with an accurate voltage gain of fi ve. The measurement voltage typically originates at a current s...HV7800
Vendor:Other Category:Other
The HV7800 is a high side current monitor IC, which senses the voltage across an external current sense resistor located in the power or "high" side of the circuit and translates this voltage to a ground referenced circu...HV78
Vendor:Other Category:Other
The HV78 is a low-voltage serial to high-voltage parallel converter with push-pull outputs. This device has been designed for use as a driver for electroluminescent displays. It can also be used in any application requir...