© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The DS26C32A is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digital data transmission, while retaining the low power characterist...
Vendor:Other Category:Other
The DS26C32AME/883 is one member of the DS26C32AME family. The DS26C32AME/883 is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digi...
Vendor:Other Category:Other
The DS26C32A is a quad differential line receiver designed to meet the RS-422, RS-423, and Federal Standards 1020 and 1030 for balanced and unbalanced digital data transmission, while retaining the low power characterist...
Mfg:NS Pack:DIP Vendor:Other Category:Other
The DS26C31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of C...
Vendor:Other Category:Other
The DS26C31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of C...
Mfg:NS Pack:5000 Vendor:Other Category:Other
The DS26C31 is a quad differential line driver designed for digital data transmission over balanced lines. The DS26C31T meets all the requirements of EIA standard RS-422 while retaining the low power characteristics of C...
Vendor:Other Category:Other
The DS26900 is a JTAG signal multiplexer providing connectivity between one of three master ports and up to 18 (36 in cascade configuration) secondary ports. The device is fully configurable from any one of the three mas...
Mfg:DALLAS Pack:CSBGA D/C:0711+ Vendor:Other Category:Other
The DS26556 is a quad, software-selectable T1,E1, or J1 transceiver with a cell/packet/TDM interface. It is composed of four framer/formatters + LIUs, and a UTOPIA (cell), POS-PHYTM (packet), and TDM backplane interface....
Mfg:DALLAS Pack:CSBGA D/C:0625+ Vendor:Other Category:Other
The DS26528 is a single-chip 8-port framer and line interface unit (LIU) combination for T1, E1, and J1 applications. Each port is independently configurable,supporting both long-haul and short-haul lines
Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26521The DS26521DK is designed as one kind of Octal T1/E1/J1 Transceiver device that comes complete with a transceiver, transformers, termination resistors, configuration switches, network connectors, processor, RS-232 USB in...
Vendor:Other Category:Other
The DS26521 is a single-channel framer and line interface unit (LIU) combination for T1, E1, and J1 applications. The device supports both long-haul and short-haul lines.
Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DEMO FOR DS26519The DS26519DK is designed as one kind of Octal T1/E1/J1 Transceiver device that comes complete with a transceiver, transformers, termination resistors, configuration switches, network connectors, processor, RS-232 USB in...
Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26518The DS26518DK is designed as one kind of Octal T1/E1/J1 Transceiver device that comes complete with a transceiver, transformers, termination resistors, configuration switches, network connectors, processor, RS-232 USB in...
Vendor:Other Category:Other
The DS26518 is a single-chip 8-port framer and line interface unit (LIU) combination for T1, E1, and J1 applications. Each port is independently configurable, supporting both long-haul and short-haul lines. The 8-port SC...
Mfg:DALLAS D/C:07+ Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26504The DS26504DK is an easy-to-use evaluation board for the DS26504 T1/E1/J1/64K/8KCC BITS element.The DS26504DK is intended to be used as a standalone design kit. The board is complete with a DS26504 BITS element, transfor...
Mfg:DALLAS Pack:LQFP D/C:0628+ Vendor:Other Category:Other
The DS26504 is a building-integrated timing-supply (BITS) clock-recovery element. It also functions as a basic T1/E1 transceiver. The receiver portion can recover a clock from T1, E1, 64kHz composite clock (64KCC), and 6...
Mfg:Dallas Pack: KIT D/C:8 Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26503The DS26503DK is an easy-to-use evaluation board for the DS26503 T1/E1/J1 BITS element. The DS26503DK is intended to be used as a stand-alone design kit. The board is complete with a DS26503 BITS element, transformers, t...
D/C:07+ Vendor:Other Category:Other
The DS26503 is a building-integrated timing-supply (BITS) clock-recovery element. It also functions as a basic T1/E1 transceiver. The receiver portion can recover a clock from T1, E1, and 6312kHz synchronization timing i...
Mfg:Dallas Pack: KIT D/C:8 Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26502The DS26502DK is an easy-to-use evaluation board for the DS26502 T1/E1/J1/64KCC BITS element.The DS26502DK is intended to be used as a standalone design kit. The board is complete with a DS26502 BITS element, transformer...
Vendor:Other Category:Other
The DS26502 is a building-integrated timingsupply (BITS) clock-recovery element. It also functions as a basic T1/E1 transceiver. The receiver portion can recover a clock from T1,E1, 64kHz composite clock (64KCC), and 631...
Mfg:DALLAS Pack:CSBGA D/C:0630+ Vendor:Other Category:Other
The DS26401 is an octal, software-selectable T1, E1 or J1 framer. It is composed of eight framer/formatters and a system (backplane) interface. Each framer has an HDLC controller that can be mapped to any DS0 or FDL (T1)...
Vendor:Other Category:Other
DS26334 features:
16 E1, T1, or J1 Short/Long-Haul Line Interface UnitsIndependent E1, T1 or J1 SelectionsSoftware-Selectable Transmit and Receive-Side Impedance MatchingCrystal Less Jitter AttenuatorSelectable Single-...
Mfg:DALLAS Pack:CSBGA D/C:0611+ Vendor:Other Category:Other
The DS26324 is a 16-channel short-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A wide variety of applications are supported through internal impedance matching. A single bill of ...
Mfg:Dallas Pack: KIT D/C:8 Vendor:Dallas Semiconductor Category:Programmers, Development Systems
KIT DESIGN FOR DS26303The DS26303DK is a fully integrated design kit for the DS26303 3.3V, 8-port, E1/T1/J1 line interface unit (LIU). This design kit contains all the necessary circuitry to evaluate the DS26303 in all modes of operation. The...
Vendor:Other Category:Other
The DS26303 is an 8-channel short-haul line interface unit (LIU) that supports E1/T1/J1 from a single 3.3V power supply. A wide variety of applications are supported through internal termination or external termination. ...
Mfg:DALLAS Pack:CSBGA D/C:0542+ Vendor:Other Category:Other
On the transmit side, the DS26102 receives ATM cells from an ATM device through a UTOPIA II interface,provides cell buffering (up to 4 cells), HEC generation and insertion, cell scrambling, and converts the data to a ser...
Mfg:Dallas Pack:CSBGA D/C:8 Vendor:Other Category:Other
On the transmit side, the DS26101 receives ATM cells from an ATM device through a UTOPIA II interface,provides cell buffering (up to 4 cells), HEC generation and insertion, cell scrambling, and converts the data to a ser...
Vendor:Other Category:Other
The DS25CP152Q is a 3.125 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure...
Vendor:Other Category:Other
The DS25CP104A is a 3.125 Gbps 4x4 LVDS crosspoint switches optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Features of the DS25CP104A are:(1)...
Vendor:Other Category:Other
The DS25CP102Q is a 3.125 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Fully differential signal paths ensure...
Vendor:Other Category:Other
The DS25C400 is a four-channel serializer/deserializer (SERDES) for high-speed serial data transmission over controlled impedance transmission media such as a printed circuit board backplane or twin-axial cable. It is ca...
Vendor:Other Category:Other
UniqueWare Add-Only Memories are factory programmed versions of the DS2502 (1024 bit), the DS2505 (16-kbit) and the DS2506 (64k bit) Add-Only Memories, respectively. They differ from the regular devices in their custom R...
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC MEMORY ADD-ONLY 64KB 8-SOICThe DS2506S is designed as 64k bits add-only memory identifies and stores relevant information about the product to which it is associated.DS2506S has many features. (1)65536bits electrically programmable read only memor...
Mfg:Dallas Pack:PR35 D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC MEMORY ADD-ONLY 64KB PR-35The DS2506 64 kbits Add-Only Memory identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a s...
Vendor:Other Category:Other
UniqueWare Add-Only Memories are factory programmed versions of the DS2502 (1024 bit), the DS2505 (16-kbit) and the DS2506 (64k bit) Add-Only Memories, respectively. They differ from the regular devices in their custom R...
Vendor:Other Category:Other
The DS2505P is designed as 16-kbit addonly memory identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, f...
Mfg:DALLAS Pack:SMD Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MEMORY ADD-ONLY 16KB TO-92
Mfg:DALLS D/C:04+ Vendor:Other Category:Other
UniqueWare Add-Only Memories are factory programmed versions of the DS2502 (1024 bit), the DS2505 (16-kbit) and the DS2506 (64k bit) Add-Only Memories, respectively. They differ from the regular devices in their custom R...
Vendor:Other Category:Other
The DS2502P-UNW is designed as a uniqueware add-only memory. It differs from the regular devices in its custom ROM family codes and the uniqueware identifier 5E7 in plasce of the upper 12 bits of the standard serializati...
Mfg:Dallas Pack:TO92 D/C:8 Vendor:Other Category:Other
The DS2502-E48 is a variant of the DS2502 1024-bit add-only memory. It differs from the standardDS2502 in its custom ROM family code 89H, and the UniqueWare Identifier 5E7H in place of the upper12 bits of the standard RO...
D/C:N/A Vendor:Other Category:Other
Mfg:DALLAS Pack:STK D/C:2005+ Vendor:Other Category:Other
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB v...
Vendor:Other Category:Other
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB v...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB v...
Vendor:Other Category:Other
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus. It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB v...
Vendor:Other Category:Other
The DS2490 is a bridge chip that enables communication between a USB host system and a 1-Wire bus.It provides regular, overdrive, and flexible 1-Wire communication speeds and a full-speed 12Mbps connection to USB. USB ve...
Vendor:Other Category:Other
The DS2482-800 is an I²C™ to 1-Wire bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I²C masters to perform bidirectional protocol conversion between the I²C mast...
Vendor:Other Category:Other
The DS2482-101 is designed as one kind of single-channel 1-wire master device that can be used in (1)printers; (2)medical instruments; (3)industrial sensors; (4)cell phones, PDAs applications. And this device performs sl...
Vendor:Other Category:Other
The DS2482-100 is an I²C to 1-Wire bridge device that interfaces directly to standard (100kHz max) or fast (400kHz max) I²C masters to perform bidirectional protocol conversion between the I²C master and...
Vendor:Other Category:Other
The DS2480S is designed as a serial port to 1-wire interface chip that supports standard and overdrive speeds. It connects directly to UARTs and 5V RS232 systems.DS2480S has many features. (1)Universal, commonground seri...
Mfg:DALLAS Pack:SOP Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC LINE DRVR W/SENSOR 1-W 8-SOICThe DS2480B is a serial port to 1-Wire interface chip that supports regular and Overdrive speeds. It connects directly to UARTs and 5V RS232 systems. Interfacing to RS232C (± 12V levels) requires a passive clamping circu...
Mfg:TOSHIBA Pack:SMD-8 D/C:125 Vendor:Other Category:Other
The DS2480 is a serial port to 1-Wire interface chip that supports standard and Overdrive speeds. It connects directly to UARTs and 5V RS232 systems. Interfacing to RS232C (± 12V levels) requires a passive clamping circu...
Vendor:Other Category:Other
Flexibility. The DS2475WAR SpectrAlert Dual Strobe line incorporates two visible notification appliances, to accommodate those applications where a two stage alarm system or two distinct visible signals are required. Ava...
Mfg:DALLAS Pack:SOP-8 D/C:N/A Vendor:Other Category:Other
The DS2450 1-Wire Quad A/D Converter is based on a successive-approximation analog to digital converter with a four to one analog multiplexer. Each input channel of DS2450 has its own register set to store the input volt...
Vendor:Other Category:Other
The DS2442 2-Cell Li-Ion Battery Manager provides all essential functions for monitoring, protecting and managing two-cell lithium-ion battery packs. The DS2442 constantly measures cell voltages, current, and temperature...
Vendor:Other Category:Other
The DS2441 1-Cell Li-Ion Battery Manager provides all essential functions for monitoring, protecting and managing one-cell lithium-ion battery packs. The DS2441 constantly measures cell voltage, current, and temperature,...
Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MONITOR SMART BATTERY 8-SOICThe DS2438Z is designed as smart battery monitor which provides several functions that are desirable to carry in a battery pack: a means of tagging a battery pack with a unique serial number, a direct-to-digital temperat...
Vendor:Other Category:Other
The DS2438K Evaluation Kit makes performance evaluation, software development, and prototyping with the DS2438 Smart Battery Monitor easy. The evaluation board interfaces to an IBM-compatible PC through a DS9123 Serial P...
Mfg:DALLAS Pack:SOP/8 Vendor:Other Category:Other
The DS2438 Smart Battery Monitor provides several functions that are desirable to carry in a battery pack: a means of tagging a battery pack with a unique serial number, a direct-to-digital temperature sensor which elimi...
Vendor:Other Category:Other
Mfg:DALLAS Pack:SOP Vendor:Other Category:Other
The DS2437 Smart Battery Monitor provides several functions that are desirable to carry in a battery pack: a means of tagging a battery pack with a unique serial number; a direct-to-digital temperature sensor which elimi...
Vendor:Maxim Integrated Products Category:Programmers, Development Systems
KIT DEMO BATT ID/MON CHIP DS2436
Mfg:DALLAS Pack:N/A D/C:09+ Vendor:Other Category:Other
The DS2436 Battery Identification/Monitor Chip provides a convenient method of tagging and identifying battery packs, by manufacturer, chemistry, or other identifying parameters. The DS2436 allows the battery pack to be ...
Mfg:4961 Pack:DALLAS Vendor:Other Category:Other
The DS2435 Battery Identification Chip with Time/Temperature Histogram provides a convenient method of tagging and identifying battery packs by manufacturer, chemistry, or other identifying parameters. The DS2435 allows ...
Mfg:DS D/C:0 Vendor:Other Category:Other
The DS2434 Battery Identification Chip provides a convenient method of tagging and identifying battery packs by manufacturer, chemistry, or other identifying parameters. The DS2434 allows the battery pack to be coded wit...
Mfg:MAXIM Vendor:Other Category:Other
The DS2433-Z01 is identical to the standard DS2433 with the exception that the write cycle endurance specification is relaxed to 10,000 cycles as specified in Table 1. The device consists of a factory-lasered registratio...
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 1-WIRE 4KB 8-SOICThe DS2433S is designed as 4K-bit 1-wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for...
Mfg:DALLAS Pack:TO92 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 1-WIRE 4KB PR-35The DS2433 4kb 1-Wire® EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a sin...
Vendor:Other Category:Other
The DS2432 combines 1024 bits of EEPROM, a 64-bit secret, an 8-byte register/control page with up to 5 user read/write bytes, a 512-bit SHA-1 engine and a fully-featured 1-Wire interface in a single chip. Each DS2432 has...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
The DS2431 is a 1024-bit, 1-Wire® EEPROM chip organized as four memory pages of 256 bits each. Data is written to an 8-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, the four m...
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC EEPROM 256BIT 1-WIRE 6-TSOCThe DS2430AP is designed as 256-bit 1-wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, f...
Mfg:DALLAS Pack:SOJ6 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC EEPROM 256BIT 1-WIRE TO-92The DS2430A 256-bit 1-Wire EEPROM identifies and stores relevant information about the product to which it is associated. This lot or product specific information can be accessed with minimal interface, for example a sin...
Mfg:DALLAS Pack:1000 D/C:01. Vendor:Other Category:Other
The DS2423 1-Wire® RAM with Counters is a fully static, read/write memory for battery operation in a low-cost, six-lead TSOC, surface-mount package. The memory is organized as 16 pages of 256 bits each. In addition, ...
Vendor:Other Category:Other
The DS2417P is designed as 1-wire time chip with interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. It contains a unique lasered ROM and a real-time clock/calendar...
Mfg:DALLAS Pack:1000 D/C:01. Vendor:Other Category:Other
The DS2417 1-Wire Time Chip with Interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. The DS2417 contains a unique lasered ROM and a real-time clock/calendar impleme...
Vendor:Other Category:Other
The DS2415P is designed as 1-wire time chip with interrupt offers a simple solution for storing and retrieving vital time information with minimal hardware. It contains a unique lasered ROM and a real-time clock/calendar...
Mfg:DALLAS Pack:1000 D/C:00-02 Vendor:Other Category:Other
The DS2415 1-Wire Time Chip offers a simple solution for storing and retrieving vital time information with minimal hardware. The DS2415 contains a unique, lasered ROM and a real time clock/calendar implemented as a bina...
Vendor:Other Category:Other
The DS2411 silicon serial number is a low-cost, electronic registration number with external power supply. It provides an absolutely unique identity that can be determined with a minimal electronic interface (typically, ...
Vendor:Other Category:Other
The DS2409T MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler DS2409T maintains a comm...
Vendor:Other Category:Other
The DS2409R MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common groun...
Vendor:Other Category:Other
The DS2409P is designed as an essential component to build and control 1-wire microLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common ground lev...
Mfg:MAXIM Vendor:Other Category:Other
The DS2409 MicroLAN coupler is an essential component to build and control 1-Wire MicroLAN networks with multi-level branching. In contrast to approaches that switch the ground line, the coupler maintains a common ground...
Vendor:Other Category:Other
The DS2408 is an 8-channel, programmable I/O 1-Wire chip. PIO outputs are configured as open-drain and provide an on resistance of 100 max. A robust PIO channel-access communication protocol ensures that PIO output-setti...
Vendor:Other Category:Other
The DS2407 Dual Addressable Switch Plus Memory is a pair of open drain Nchannel transistors that can be turned on or off via the 1Wire bus. Alternatively, either open drain output can serve as a logic input that can be m...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The DS2406 Dual Addressable Switch Plus Memory offers a simple way to remotely control a pair of open drain transistors and to monitor the logic level at each transistor's output via the 1-Wire bus for closed loop contro...
Mfg:DAL Vendor:Other Category:Other
Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC SWITCH ADDRESS NCH O-D TO-92The DS2405 Addressable Switch is an open drain N-channel transistor that can be turned on or off by matching the 64-bit factory-lasered registration number within each part. The 64-bit number consists of an 8-bit family ...
Mfg:DALLAS Pack:SSOP Vendor:Other Category:Other
The DS2404 EconoRAM Time Chip offers a simple solution for storing and retrieving vital data and time information with minimal hardware. The DS2404 contains a unique lasered ROM, real-time clock/calendar, interval timer,...
Mfg:DALLAS Pack:SOP6 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC SILICON SERIAL NUMBER TO-92The DS2401 enhanced Silicon Serial Number is a low-cost, electronic registration number that providesan absolutely unique identity which can be determined with a minimal electronic interface, typically asingle port pin o...
Mfg:DALLAS D/C:07+ Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TXRX DL RS-232 5V IND 16-SOIC The DS232A is a dual RS-232 driver/receiver pair that generates RS-232 voltage levels from a single +5- volt power supply. Additional ±12-volt supplies are not needed since the DS232A uses on-board charge pumps to c...
Vendor:Other Category:Other
The DS22EV5110 is a 6.75 Gbps (3 x 2.25 Gbps) extended reach equalizer optimized for DVI™and HDMI™ cable extension applications with a high performance re-clocking feature. It supports 3 Transition Minimized ...
Mfg:MAXIM Vendor:Other Category:Other
The DS2291 T1 Long Loop Stik contains all the circuitry necessary to recover clock and data from a T1 line. The DS2291 contains an Automatic Line Build Out (ALBO) circuit that allows it to adapt to T1 lines varying in le...
Mfg:Dallas Pack:SSTI D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC ISOLATION STIK T1 30-PINThe DS2290 T1 Isolation Stik provides all the surge and isolation protection that is necessary to connect a piece of equipment to a T1 line. It offers a function similar to that provided by a Data Access Arrangement (DAA...
Mfg:Dallas Pack:DIP D/C:8 Vendor:Dallas Semiconductor Category:Integrated Circuits (ICs)
IC TXRX TRI 5V RS-232 20-DIPThe DS229 is a triple RS-232 driver/receiver pair that generates RS-232 voltage levels from a single +5-volt power supply. Additional ±12-volt supplies are not needed since the DS229 uses on-board chargepumps to convert ...
Mfg:MAXIM Vendor:Other Category:Other
The DS2282 completely controls the Facility Data Link(FDL) as described in the Bellcore document TRTSY000194 (Extended Superframe Format InterfaceSpecification December 1987) and the ANSI docu-ment T1.4031989 (Carrier t...
Vendor:Other Category:Other
The DS2252T Secure Microcontroller Module is an 8051-compatible microcontroller based onnonvolatile RAM technology. It is designed for systems that need to protect memory contents fromdisclosure. This includes key data, ...
Vendor:Other Category:Other
The DS2251T 128k Soft Microcontroller Module is an 8051-compatible microcontroller module based onnonvolatile RAM technology. It is designed for systems that need large quantities of nonvolatile memory.Like other members...
Mfg:Dallas D/C:8 Vendor:Maxim Integrated Products Category:Integrated Circuits (ICs)
IC MICROCNTRLR 32X8 16MHZ 40SIMMThe DS2250(T) Soft Microcontroller Module is a fully 8051-compatible 8-bit CMOS microcontroller thatoffers "softness" in all aspects of its application. This is accomplished through the comprehensive use ofnonvolatile te...
Vendor:Other Category:Other
The DS2229 is an 8,388,608-bit low-power fully static Random Access Memory organized as a 524,888word by 16 bits using CMOS technology. The device employs the popular JEDEC standard 80-pin SIMMconnection scheme with no a...
Vendor:Other Category:Other
The DS2227 Flexible NV SRAM Stik is a self-contained 4,194,304-bit nonvolatile static RAM which canbe flexibly organized as 128k x 32 bits, 256k x 16 bits, or 512k x 8 bits. The nonvolatile memory containsall necessary c...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.