© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:Dallas D/C:8 Vendor:Other Category:Other
The DS1213C SmartSocket is a 28-pin, 600 mil DIP socket with a built-in CMOS controller circuit and an embedded lithium energy source.DS1213C accepts a 32K x 8 JEDEC bytewide CMOS static RAM. When the DS1213C is mated wi...
Mfg:Dallas D/C:8 Vendor:Other Category:Other
The DS1213B SmartSocket is a 28-pin, 600 mil DIP socket with a built-in CMOS controller circuit and an embedded lithium energy source. DS1213B accepts either 24-pin 2K x 8 (lower-justified) or 28-pin 8K x 8 JEDEC bytewid...
Mfg:Dallas Pack:DIP D/C:8 Vendor:Other Category:Other
The DS1211 Nonvolatile Controller x 8 Chip is a CMOS circuit which solves the application problem of converting CMOS RAMs into nonvolatile memories. Incoming power is monitored for an out-oftolerance condition. When such...
Mfg:DALLAS Pack:DIP Vendor:Other Category:Other
The DS1210 Nonvolatile Controller Chip is a CMOS circuit which solves the application problem of converting CMOS RAM into nonvolatile memory. Incoming power is monitored for an out-of-tolerance condition. When such a con...
Mfg:DALLAS Pack:SMD D/C:07/08+ Vendor:Other Category:Other
The DS1207 TimeKey is a miniature security system that stores 64 bits of user-definable identification code and a 64-bit security match code that protects 384 bits of read/write nonvolatile memory. The 64-bit identificat...
Vendor:Other Category:Other
The DS1205V MultiKey has three, 384-bit read/write data partitions, each protected by its own 64-bit I.D. and security match fields. The security match field, programmed by the customer, can never be read from the DS1205...
Vendor:Other Category:Other
The DS1205S MultiKey Chip is an enhanced version of the DS1204U Electronic Key which has both a standard 3-wire interface (data, clock, and reset) and a 1-wire interface. The DS1205S MultiKey has three secure read/ write...
Mfg:DALLAS Vendor:Other Category:Other
The DS1204V Electronic Key is a miniature security system that stores 64 bits of user-definable identification code and a 64-bit security match code that protects 128 bits of read/write nonvolatile memory. The 64-bit ide...
Mfg:DALLAS Pack:SMD Vendor:Other Category:Other
The DS1202 Serial Timekeeping Chip DS1202S contains a real time clock/calendar and 24 bytes of static RAM. DS1202S communicateswith a microprocessor via a simple serial interface.The real time clock/calendar provides sec...
Mfg:DALLAS Pack:DIP Vendor:Other Category:Other
The DS1202 Serial Timekeeping Chip contains a real time clock/calendar and 24 bytes of static RAM. It communicateswith a microprocessor via a simple serial interface.The real time clock/calendar provides seconds,minutes,...
Vendor:Other Category:Other
The DS1200 is Emerson's highest power, highest density bulk front end in the industry standard 1U x 2U form factor. The DS1200 series is the latest addition to the popular DS650 and DS850 designed for hot plug distribute...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS1135Z-5 is a low-power, +5-volt high-speed version.It has three independent logic buffered delays in a single package. The device is Dallas Semiconductor's fastest 3-in-1 delay line.It is available in a standard 8-...
Vendor:Other Category:Other
The DS1135L series is a low-power, 3V high-speed version of the popular DS1013, DS1033, DS1035 series.The DS1135L series of delay lines have three independent logic buffered delays in a single package. The device is Dall...
Mfg:SOP8 Pack:800 D/C:DALLAS Vendor:Other Category:Other
The DS1135 series is a low-power, +5-volt high-speed version of the popular DS1013 and DS1035.The DS1135 series of delay lines have three independent logic buffered delays in a single package. The device is Dallas Semic...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS1110L 10-tap delay line is a 3V version of the DS1110. It has 10 equally spaced taps providing delays from 10ns to 500ns. The DS1110L series delay lines provide a nominal accuracy of ±5% or ±2ns, whichever is great...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS1110 delay line is an improved replacement for the DS1010. It has ten equally spaced taps providing delays from 5ns to 500ns. The devices are offered in astandard 16-pin SO or 14-pin TSSOP. The DS1110 series delay ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS1107SG36 is designed as one member of the DS1107SG series which are rectifier diodes. Its typical applications is rectification, freewheel diode, DC motor control, power supplies, welding and battery chargers.DS110...
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:MAXIM Pack:SOP-8 D/C:0414+ Vendor:Other Category:Other
The DS1100L is a 3.3V version of the DS1100. It is characterized for operation over the range 3.0V to 3.6V. The DS1100L series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices a...
Mfg:DAL Pack:800 Vendor:Other Category:Other
The DS1100 series delay lines have five equally spaced taps providing delays from 4ns to 500ns. These devices are offered in 8-pin DIPs and surface-mount packages to save PC board area. Low cost and superior reliability ...
Vendor:Other Category:Other
The DS10CP154A is a 1.5 Gbps 4x4 LVDS crosspoint switch optimized for high-speed signal routing and switching over FR-4 printed circuit board backplanes and balanced cables. Features of the DS10CP154A are:(1)DC-1.5 Gbps...
Vendor:Other Category:Other
The DS10CP152Q is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables.Features of the DS10CP152Q are:(1)AECQ-10...
Vendor:Other Category:Other
The DS10CP152 is a 1.5 Gbps 2x2 LVDS crosspoint switch optimized for high-speed signal routing and switching over lossy FR-4 printed circuit board backplanes and balanced cables. Features of the DS10CP152 are:(1)DC-1.5 ...
Vendor:Other Category:Other
The DS10BR254 is a 1.5 Gbps 1:4 LVDS repeater optimized for high-speed signal routing and distribution over FR-4 printed circuit board backplanes and balanced cables. Features of the DS10BR254 are:(1)DC-1.5 Gbps low jit...
Vendor:Other Category:Other
The DS10BR150TSD is a single channel 1.0 Gbps LVDS buffer optimized for high-speed signal transmission over lossy FR-4 printed circuit board backplanes and balanced cables. The applications of it are: clock and data buff...
Mfg:DALLAS Pack:06+ D/C:500 Vendor:Other Category:Other
The DS1099 is a low-cost, low-power, low-frequency silicon oscillator that generates two square-wave outputs with frequencies between 0.25Hz and 1.048MHz. Individual output enables allow both outputs to be enabled/disabl...
Vendor:Other Category:Other
The DS1094L is a silicon oscillator that generates four multiphase, spread-spectrum, square-wave outputs. Frequencies between 2MHz and 31.25kHz can be output in either two, three, or four-phase mode. The internal master ...
Vendor:Other Category:Other
The DS1091L is a low-cost clock generator that is factorytrimmed to output frequencies from 130kHz to 66.6MHz with a nominal accuracy of ±0.25%. Assembled in an 8-pin MAXpackage, the DS1091L is designed to operate with a...
Vendor:Other Category:Other
The DS1090 is a low-cost, dithered oscillator intended to be used as an external clock for switched-mode power supplies and other low-frequency applications. The dithering or sweeping function reduces peak-radiated emiss...
Mfg:1600 Vendor:Other Category:Other
Vendor:Other Category:Other
The DS1089L is a clock generator that produces a spread spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The DS1089L is shipped from the factory programmed at a specific frequency. The DS1089...
Vendor:Other Category:Other
The DS1088L is a low-cost clock generator that produces a square-wave output without external timing components. The fixed-frequency oscillator is available in factory-calibrated frequencies from 312kHz to 133MHz. The DS...
Mfg:MAX Pack:MSOP-8 D/C:05+ Vendor:Other Category:Other
The DS1087L is a clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The DS1087L is shipped from the factory programmed at a specific frequency and spread-...
Mfg:DALLAS Pack:06+ D/C:2000 Vendor:Other Category:Other
The DS1086L EconOscillator™ is a 3.3V programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 130kHz to 66.6MHz. The selectable dithered output reduces radiate...
Vendor:Other Category:Other
The DS1086 EconOscillator™ is a programmable clock generator that produces a spread-spectrum (dithered) square-wave output of frequencies from 260kHz to 133MHz. The selectable dithered output reduces radiated- emis...
Vendor:Other Category:Other
The DS1085L is a dual-output frequency synthesizer requiring no external timing components for operation. DS1085L can be used as a standalone oscillator or as a dynamically programmed, processor-controlled peripheral dev...
Vendor:Other Category:Other
The DS1085 is a dual-output frequency synthesizer requiring no external timing components foroperation. DS1085 can be used as a standalone oscillator or as a dynamically programmed, processor-controlledperipheral device....
Mfg:DALLAS Pack:N/A D/C:09+ Vendor:Other Category:Other
The DS1077L is a dual-output, programmable, fixed-frequency oscillator requiring no external components for operation. The DS1077L can be used as a processor-controlled frequency synthesizer or as a stand-alone oscillato...
Vendor:Other Category:Other
The DS1077 is a dual-output, programmable, fixed-frequency oscillator requiring no external components for operation. The DS1077 can be used as a processor-controlled frequency synthesizer or as a standalone oscillator. ...
Vendor:Other Category:Other
The DS1075Z is designed as is a fixed frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range 29.2kHz to 100 MHz through the use of an onchip factory-...
Mfg:DALLAS D/C:07+ Vendor:Other Category:Other
The DS1075K Programming/Evaluation Kit makes programming and performance evaluation of the Dallas Oscillator product line easy. DS1075K contains everything you need to program the Dallas Programmable Oscillators; with th...
Vendor:Other Category:Other
The DS1075-IND EconOscillator/Divider is a fixed frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range of approximately 30kHz to 100 MHz through the...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The DS1075 is a fixed frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range of approximately 30 KHz to 100 MHz through the use of an on-chip program...
Vendor:Other Category:Other
The DS10730-10A is a specially programmed and tested DS1073Z in an 8-pin SO (0.05in) package. The device is configured internally and specified like a standard DS1073Z with two exceptions. The divider chain is bypassed a...
Pack:SMD Vendor:Other Category:Other
The DS1073 is a fixed-frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range of approximately 27.3kHz to 100MHz through the use of an on-chip program...
Vendor:Other Category:Other
The DS1065 is a fixed frequency oscillator requiring no external components for operation. Numerous operating frequencies are possible in the range of approximately 30 kHz to 100 MHz through the use of an on-chip program...
Vendor:Other Category:Other
The DS1052 is a programmable, 5-bit, pulse-width modulator featuring a 2-wire addressable controlled interface. The DS1052 operates from power supplies ranging from 2.7V up to 5.5V. The PWM output provides a signal that ...
Mfg:DALLAS Pack:N/A D/C:09+ Vendor:Other Category:Other
The DS1050 is a programmable, 5-bit, pulse-width modulator featuring a 2-wire addressable controlled interface. The DS1050 operates from power supplies ranging from 2.7V up to 5.5V. The PWM output provides a signal that ...
Mfg:DALL Pack:94 D/C:DIP-16 Vendor:Other Category:Other
The DS1045 is a programmable silicon delay line having one input and two 4-bit programmable delay outputs. Each 4-bit programmable output offers the user 16 possible delay values to select from, starting with a minimum i...
Mfg:DALLAS Pack:DIP D/C:05+ Vendor:Other Category:Other
The DS1044 series is a 4in1 version of the low power, +5 Volt, high speed, DS1035.The DS1044 series of delay lines have four independent logic buffered delays in a single package. The device is Dallas Semiconductor's fas...
Mfg:DALLAS D/C:03+ Vendor:Other Category:Other
The DS1040 Pulse Generator is a user-programmable one-shot with a choice of five precise pulse widths. Maximum widths range from 50 ns to 500 ns; increments range from 2.5 ns to 100 ns. For maximum flexibility in applica...
Mfg:DALLAS Pack:1000 D/C:99. Vendor:Other Category:Other
The DS1035 series is a low-power +5-volt high-speed version of the popular DS1013 and complements the DS1033 +3.3 Volt version.The DS1035 series of delay lines have three independent logic buffered delays in a single pac...
Mfg:DALLAS Pack:N/A D/C:09+ Vendor:Other Category:Other
The DS1033 series is a low-power +3.3 Volt version of the DS1035. It is characterized for operation over the range of 2.7V to 3.6V.The DS1033 series of delay lines have three independent logic buffered delays in a single...
Mfg:DALLAS D/C:O9+ Vendor:Other Category:Other
The DS1023 is an 8-bit programmable delay line similar in function to the DS1020/DS1021.Additional features of the DS1023 have been added to extend the range of applications:The internal delay line architecture has been...
Mfg:SOP D/C:2005+ Vendor:Other Category:Other
The DS1021 Programmable 8-Bit Silicon Delay Line consists of an 8-bit, user-programmable CMOS silicon integrated circuit. Delay values, programmed using either the 3-wire serial port or the 8-bit parallel port, can be va...
Mfg:DS Pack:800 Vendor:Other Category:Other
The DS1020 Programmable 8-Bit Silicon Delay Line consists of an 8-bit, user-programmable CMOS silicon integrated circuit. Delay values, programmed using either the 3-wire serial port or the 8-bit parallel port, can be va...
Pack:DIP D/C:99+ Vendor:Other Category:Other
The DS1013 series of delay lines has three independent logic buffered delays in a single package. The devices are offered in a standard 14-pin DIP which is pin-compatible with hybrid delay lines. Alternative 8-pin DIP an...
Mfg:DALLAS Pack:SOP8 D/C:08+ Vendor:Other Category:Other
In its most simple configuration, the DS1012 2-in-1 Sub-Miniature Silicon Delay Line Chip provides two inputs, each of which in turn provides independent delays to a pair of outputs. The DS1012-1 and DS1012-3 are example...
Pack:DIP D/C:99+ Vendor:Other Category:Other
The DS1010 series delay line has ten equally spaced taps providing delays from 5 ns to 500 ns. The devices are offered in a standard 14-pin DIP which is pin-compatible with hybrid delay lines. Alternatively, a 16-pin SOI...
Vendor:Other Category:Other
DS1009 combine a Look-up Table (LUT) based FPGA fabric with non-volatile Flash cell s in an architecture referred to as flexiFLASH.The flexiFLASH approach provides benefits including instant-on, infinite reconfigurabilit...
Mfg:DS Pack:800 Vendor:Other Category:Other
The DS1007 7-in-1 Silicon Delay Line provides seven independent delay times which are set by Dallas Semiconductor to the customer's specification. The delay times can be set from 3 ns to 40 ns with an accuracy of ±2 ns a...
Mfg:TOSHIBA Pack:DIP D/C:940 Vendor:Other Category:Other
The DS1005 5-Tap Silicon Delay Line provides five equally spaced taps with delays ranging from 12 ns to 250 ns, with an accuracy of ±2 ns or ±3%, whichever is greater. DS1005 is offered in a standard 14- pin DIP, making ...
Mfg:DALLAS Pack:1000 D/C:02. Vendor:Other Category:Other
The DS1004 is a 5-tap all silicon delay line which can provide 2, 3, 4, or 5 ns tap-to-tap delays within a standard part family. The device is Dallas Semiconductor's fastest 5-tap delay line. It is available in a standar...
Vendor:Other Category:Other
The DS1000-IND series delay lines have five equally spaced taps providing delays from 4 ns to 500 ns. These devices are offered in standard 8- and 14-pin DIPs that are pin-compatible with hybrid delay lines. Alternativel...
Mfg:DALLAS Pack:SOP8 D/C:08+ Vendor:Other Category:Other
The DS1000 series delay lines have five equally spaced taps providing delays from 4 ns to 500 ns. These devices are offered in a standard 14-pin DIP that is pin-compatible with hybrid delay lines. Alternatively, 8-pin DI...
Vendor:APEM Components Category:Switches
STANDARD DIP SWITCHThe MSC23136D/DL-xxBS10/DS10 is a fully decoded, 1,048,576-word x 36-bit CMOS dynamic random access memory module composed of eight 4Mb DRAMs in SOJ packages and two 2Mb DRAMs in SOJ packages mounted with ten decoupling ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The DS087 ACE Multi-Package Module (MPM) solution addresses the need for a space-efficient, pre-engineered, high-density configuration solution in multiple FPGA systems.The DS087 ACE technology is a ground-breaking in-sy...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Fujitsu resonators DS07-20101-7E(C1, C3, C4 series) feature originally developed single crystals with a high electromechanical coupling coefficient (LiTaO3: lithium tantalate, LiNbO3: lithium niobate), the result is com...
Vendor:Other Category:Other
The DS07-16505-2Es are lines of single-chip microcontrollers based on a 32-bit high-performance RISC CPU, incorporating a variety of I/O resources for embedded control applications which require high CPU performance for ...
Vendor:Other Category:Other
The DS07-13711-4E is a 16-bit general purpose high-capacity microcontroller designed for vehicle meter control applications etc. The instruction set retains the same AT architecture as the FUJITSU original F2MC-8L and F2...
Vendor:Other Category:Other
The FUJITSU MB90420G/5G (A) Series DS07-13711-1E is a 16-bit general purpose high-capacity microcontroller designed for vehicle meter control applications etc.The instruction set retains the same AT architecture as the F...
Vendor:Other Category:Other
The MB95110M series DS07-12611-1E is general-purpose, single-chip microcontrollers. In addition to a compact instruction set, the DS07-12611-1E contain a variety of peripheral functions.Note : F2MC is the abbreviation of...
Vendor:Other Category:Other
The features of the C3 series (M,N Type) resonators DS07-10205-1E are compact and high stability. They are fabricated on a lithium tantalate (LitaO3) substrate, producing resonators with ultra compact and superior stabil...
Vendor:Other Category:Other
Fujitsu resonators C4 series (P/Q type) DS07-10204-1E feature single crystals with a high electro-mechanical coefficient (LiNbO3: lithium niobate), the result is very compact packaging.DS07-10204-1E with built-in capacit...
Vendor:Other Category:Other
Fujitsu resonators C4 series (N type) DS07-10203-1E feature originally developed single crystals with a high electro-mechanical coefficient (LiNbO3: lithium niobate), the result is very compact packaging.DS07-10203-1E w...
Vendor:Other Category:Other
The C4 series (L Type) resonators DS07-10202-1E apply to the frequency range 24 to 60 MHz.DS07-10202-1E is fabricated on a lithium niobate (LiNaO3) substrate, producing resonators with ultra compact and superior stabilit...
Vendor:Other Category:Other
The iButton-TMEX Professional Software Developers DS0621-SDK, or simply the iButton-TMEX SDK, includes all of the information needed to create commercial grade iButton and 1-Wire protocol applications. This DS0621-SDK fa...
Vendor:Other Category:Other
Vendor:Other Category:Other
DS06-10801-4E is a new structured ASIC family, offering short development time, and low development cost with pre-diffused IP macros into base masters and pre-designed common 3 to 4 metal layers out of 6 to 7 layers.By u...
Vendor:Other Category:Other
All internal routing channels of the DS060 are composed of metal segments with programmable switching points and switching matrices to implement the desired routing. A structured, hierarchical matrix of routing channels ...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.