Position: Home > Circuit Diagram > power supply circuit > >Index 20
Low Cost Custom Prototype PCB Manufacturer

Index 20



Batwatch-Solar panel battery charger

Published:2013/5/2 21:37:00 Author:muriel | Keyword: Batwatch-Solar panel , battery charger

Batwatch-Solar panel battery charger
Batwatch is a simple monitor for a solar panel battery charger, using an Atmel ATtiny13V. It periodically measures the charge current and battery voltage, and shows them by blinking two LEDs. The circuit built into the plug of a VW solar charger panel that is used to prevent a discharge of the battery when a car is not used for some time. A modern car contains a large amount of electronics, and a quiescent current of 40-50mA .   (View)

View full Circuit Diagram | Comments | Reading(1916)

Solar charger for lead-acid batteries

Published:2013/5/2 21:36:00 Author:muriel | Keyword: Solar charger , lead-acid batteries

Solar charger for lead-acid batteries
This circuit is intended for charging sealed lead-acid batteries with a solar panel in small and portable applications. The customary diode that prevents the battery from discharging through the solar panel has been replaced by a FET-comparator combination. The charger will stop charging once a pre-set voltage (temperature compensated) has been reached, and recommence charging when the voltage has dropped off sufficiently. The load is disconnected when the battery voltage drops below 11V and reconnected when it gets back to 12.5V.   (View)

View full Circuit Diagram | Comments | Reading(2182)

10 Amp Solar Charge Controller by LM324

Published:2013/5/2 21:35:00 Author:muriel | Keyword: 10 Amp , Solar Charge Controller, LM324

10 Amp Solar Charge Controller by LM324
This is a solar charge controller, it’s function is to regulate the power flowing from a photovoltaic panel into a rechargeable battery. It features easy setup with one potentiometer for the float voltage adjustment, an equalize function for periodic overcharging, and automatic temperature compensation for better charging over a range of emperatures.   (View)

View full Circuit Diagram | Comments | Reading(12761)

CEMF Charger

Published:2013/5/2 21:34:00 Author:muriel | Keyword: CEMF Charger

CEMF Charger
This is s simple circuit of a CEMF charger.The CEMF charger uses the CEMF (counterelectromotive force) from an inductor to charge a capacitor to high voltages from a low voltage source.When the button is pushed the inductor will generate a small amount of CEMF that will charge the capacitor. When the button is released the inductor generates more CEMF that charges up the capacitor further.   (View)

View full Circuit Diagram | Comments | Reading(1277)

Car Battery Chargers

Published:2013/5/2 21:33:00 Author:muriel | Keyword: Car Battery Chargers

Car Battery Chargers
This charger will quickly and easily charge most any lead acid battery. The charger delivers full current until the current drawn by the battery falls to 150 mA. At this time, a lower voltage is applied to finish off and keep from over charging. When the battery is fully charged, the circuit switches off and lights a LED, telling you that the cycle has finished.   (View)

View full Circuit Diagram | Comments | Reading(2670)

A Self-Contained “67.5 volt B Battery” for Portables

Published:2013/5/2 21:31:00 Author:muriel | Keyword: Self-Contained, 67.5 volt , B Battery, Portables

A Self-Contained “67.5 volt B Battery” for Portables
This article describes the construction of an AA battery powered 67 1/2 volt “battery”. This new rechargeable “B battery” is slightly smaller than the original Eveready 467 battery and is the same weight. The substitute battery can be made in different voltages and can be powered from a wide variety of sources.   (View)

View full Circuit Diagram | Comments | Reading(2155)

Simplest DIY Li-Polymer Charger Schematic

Published:2013/5/2 21:27:00 Author:muriel | Keyword: Simplest DIY , Li-Polymer Charger

Simplest DIY Li-Polymer Charger Schematic
This is a Lithium-ion charger for lipo batteries. Circuit schematic shows configuration for charging single 3.7V lipo battery but voltage can be set to charge several batteries in series. Lipo charger sets a current limit with the LM317, and 1 resistor, and the voltage limit with the TL431, and 2 resistors.   (View)

View full Circuit Diagram | Comments | Reading(6586)

USB Li-ion battery charger

Published:2013/5/2 21:24:00 Author:muriel | Keyword: USB Li-ion, battery charger

USB Li-ion battery charger
This is a charger for lithium ion batteries which takes its power from the USB port of a computer.It uses the MCP73861 or MCP73863 Li-ion battery charger chip manufactured by Microchip.The circuit is very simple to build based on the application note.   (View)

View full Circuit Diagram | Comments | Reading(2109)

Mobile Phone Battery Charger

Published:2013/5/2 21:19:00 Author:muriel | Keyword: Mobile Phone , Battery Charger

Mobile Phone Battery Charger
The circuit presented here comes as a low-cost alternative to charge mobile telephones/battery packs with a rating of 7.2 volts, such as Nokia 6110/6150.   (View)

View full Circuit Diagram | Comments | Reading(2019)

Lithium-Ion Linear Battery Charger with Thermistor Interface

Published:2013/5/2 21:18:00 Author:muriel | Keyword: Lithium-Ion Linear, Battery Charger, Thermistor Interface

Lithium-Ion Linear Battery Charger with Thermistor Interface
Here is a Lithium-Ion Linear Battery Charger with Thermistor Interface with the LTC4050-4.X from Linea technology.The LTC 4050-4.1 and LTC4050-4.2 are complete standalone constant-current/constant-voltage linear charge controllers for lithium-ion (Li-Ion) batteries. Charge current is programmable and final float voltage has ±1% accuracy.   (View)

View full Circuit Diagram | Comments | Reading(2581)

Li Polymer Battery Charger with ISL6292

Published:2013/5/2 21:17:00 Author:muriel | Keyword: Li Polymer , Battery Charger , ISL6292

Li Polymer Battery Charger with ISL6292
Li Polymer Battery Charger with ISL6292

This is a Li-ion/Li Polymer Battery Charger with ISL6292 which is an integrated single-cell Li-ion or Li-polymer battery charger capable of operating with an input voltage as low as 2.4V. This charger is designed to work with various types of AC adapters or a USB port.The ISL6292 operates as a linear charger when the AC adapter is a voltage source. The battery is charged in a CC/CV (constant current/constant voltage) profile. The charge current is programmable with an external resistor up to 2A.   (View)

View full Circuit Diagram | Comments | Reading(1612)

Solar Cell charges single NiCd AA

Published:2013/5/2 21:14:00 Author:muriel | Keyword: Solar Cell, single NiCd AA

Solar Cell charges single NiCd AA
  (View)

View full Circuit Diagram | Comments | Reading(1665)

USB Powered AA NiMH – NiCd Battery Charger by LM393

Published:2013/5/2 21:13:00 Author:muriel | Keyword: USB Powered AA NiMH , NiCd Battery Charger, LM393

USB Powered AA NiMH – NiCd Battery Charger by LM393
The charger in this project is designed to charge two AA NiMH or NiCd cells of any capacity (as long as they are the same) at about 470mA. It will charge 700mAh NiCds in about 1.5 hours, 1500mAh NiMHs in about 3.5 hours, and 2500mAh NiMHs in about 5.5 hours. The charger incorporates an automatic charge cut-off circuit based on cell temperature, and the cells can be left in the charger indefinitely after cut-off.   (View)

View full Circuit Diagram | Comments | Reading(4825)

3A battery charger

Published:2013/5/2 21:11:00 Author:muriel | Keyword: 3A , battery charger

3A battery charger
This design is a 3A battery charger intended for use with 5-cell Ni-Cd or Ni-MH battery packs (but can be modified to suit other numbers of cells). The circuit includes automatic shutoff that occurs when the battery temperature rises 10°C above ambient.This battery charger was developed specifically for applications using either Nickel-Cadmium (Ni-Cd) or Nickel-Metal Hydride (Ni-MH) batteries that will accept a 3A fast-charge rate, and provides automatic shutoff of the high-current charge when the battery is full.The circuit use LM2576.   (View)

View full Circuit Diagram | Comments | Reading(2787)

Intelligent NiCd/NiMH Battery Charger

Published:2013/5/2 21:10:00 Author:muriel | Keyword: Intelligent, NiCd/NiMH Battery , Charger

Intelligent NiCd/NiMH Battery Charger
This cheap and easy to build NiCd/NiMH Battery Charger is suitable for automatically charging a wide range of batteries for many applications. Proper chargers are usually expensive and cheap chargers supplied with the original equipment often incorrectly charge the cells and dramatically shorten their life. This ‘intelligent’ charger was designed for high current and rapid charge applications such as cordless power tools and model racing cars.   (View)

View full Circuit Diagram | Comments | Reading(6078)

Power Supply Circuit (Two 15V AC Windings - 15-0-15)

Published:2013/4/26 1:48:00 Author:muriel | Keyword: Power Supply Circuit, Two 15V , AC Windings , 15-0-15

Power Supply Circuit (Two 15V AC Windings - 15-0-15)
  (View)

View full Circuit Diagram | Comments | Reading(1239)

Power Supply Circuit (Single 15V AC Winding)

Published:2013/4/26 1:47:00 Author:muriel | Keyword: Power Supply Circuit, Single 15V, AC Winding

Power Supply Circuit (Single 15V AC Winding)
  (View)

View full Circuit Diagram | Comments | Reading(926)

Switching power supply circuit controlled by MCU

Published:2013/4/11 1:32:00 Author:Ecco | Keyword: Switching power supply, MCU

Switching power supply circuit controlled by MCU
Switching power supply circuit controlled by MCU is shown as figure.   (View)

View full Circuit Diagram | Comments | Reading(1795)

Switching power supply circuit diagram ( KA3824B )

Published:2013/4/6 22:18:00 Author:Ecco | Keyword: Switching power supply

Switching power supply circuit diagram ( KA3824B )
Switching power supply circuit diagram ( KA3824B ) is shown as figure.   (View)

View full Circuit Diagram | Comments | Reading(5740)

LT1020 Battery Backup Regulator circuit

Published:2013/3/29 4:44:00 Author:Ecco | Keyword: Battery Backup Regulator

LT1020 Battery Backup Regulator circuit
A low-loss way to implement a”glitch-free” battery backup for a memory or similar circuit is shown on the following schematic diagram. To make LT1020 does not conduct under line-powered conditions, we have to arrange the feedback string. The line LT1020 begins to go off when the lie goes down, which allows the battery-driven LT1020 to turn on and maintain the load.   (View)

View full Circuit Diagram | Comments | Reading(990)

Pages:20/291 1234567891011121314151617181920Under 20