Features: SpecificationsDescriptionBA6132 is a monolithic switching regulator which contains five independent switching regulator blocks.Here you can get some information about the features.First,all the control circuitry required for the switching regulators is internally implemented.The second i...
BA6132F: Features: SpecificationsDescriptionBA6132 is a monolithic switching regulator which contains five independent switching regulator blocks.Here you can get some information about the features.First,al...
SeekIC Buyer Protection PLUS - newly updated for 2013!
268 Transactions
All payment methods are secure and covered by SeekIC Buyer Protection PLUS.
BA6132 is a monolithic switching regulator which contains five independent switching regulator blocks.Here you can get some information about the features.First,all the control circuitry required for the switching regulators is internally implemented.The second is high efficiency PWM type circuitry.Then is output on/off control capability (only one block).Next is low current consumption (7 mA Typ).At last,reference can be externally controlled.
What comes next is about the absolute maximum ratings (Ta=25).The VCC (supply voltage) is 18 V.The Pd (power dissipation) is 600 mW.The Topr (operating temperature range) is from -20 to 75.The Tstg (storage temperature range) is from -55 to 125.The Vrc (REF control voltage) is 5 V.
The following is about the electrical characteristics (Ta=25,VCC=12 V).The typical ICC (circuit current) is 7 mA when rated load.The fmax (maximum oscillation frequency) is 100 kHz.The typical I5,8,11 (pins 5,8,11 drive current) is 20 mA when maximum drive current.The typical I13 (pin 13 drive current) is 30 mA when maximum drive current.The typical I17 (pin 17 drive current) is 10 mA when maximum drive current.The typical HCTRL (control voltage high) is from 2.7 to 7 V.The typical HCTRL (control voltage low) is from 0 to 0.9 V.