© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The TDA9855 is a bipolar-integrated BTSC stereo/SAP decoder with hi-fi audio processor (I2C-bus controlled) for application in TV sets.
Mfg:NXP Pack:QFP-44 D/C:07+ Vendor:Other Category:Other
The TDA9853H is a bipolar-integrated BTSC stereo decoder and audio processor for application in TV sets, VCRs and multimedia PCs.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9852 is a bipolar-integrated BTSC stereo decoder with hi-fi audio processor (I2C-bus controlled) for application in TV sets, VCRs and multimedia.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9851 is a bipolar-integrated BTSC stereo decoder for application in TV sets, VCRs and multimedia PCs.
Vendor:Other Category:Other
The TDA9850 is a bipolar-integrated BTSC stereo/SAP decoder (I2C-bus controlled) for application in TV sets, VCRs and multimedia.
Mfg:PHILIPS Pack:DIP D/C:5 Vendor:Other Category:Other
The TDA9847 is a stereo/dual sound processor for TV and VTR sets. Its identification ensures safe operation by using internal digital PLL technique with extremely small bandwidth, synchronous detection and digital inte...
Mfg:PHI Pack:DIP Vendor:Other Category:Other
The TDA9845 is a stereo/dual sound processor for TV and VTR sets. Its identification ensures safe operation by using internal digital PLL technique with extremely small bandwidth, synchronous detection and digital int...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9840 is a stereo/dual sound processor for TV and VTR sets. Its identification ensures safe operation by using internal digital PLL technique with extremely small bandwidth, synchronous detection and digital int...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9830, a monolithic integrated circuit, is designed for AM-sound demodulation used in L- and L O-standardThe IC provides an audio source selector and also mute switch.
Mfg:PHILIPS Vendor:Other Category:Other
The TDA9829T is an integrated circuit for DVB-IF processing.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9821 is a monolithic, integrated, TV FM intercarrier sound demodulator for all FM standards. The circuit contains two separate FM demodulators using Phase Locked Loop (PLL) reference frequency generation. The c...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9820 is a monolithic, integrated, multistandard TV FM intercarrier sound demodulator for all FM standards. The circuit contains two separate FM demodulators using Phase Locked Loop (PLL) reference frequency gen...
Mfg:PHILIPS Pack:SMD Vendor:Other Category:Other
The TDA9819 is an integrated circuit for multistandard vision and sound-IF signal processing with single reference PLL demodulator combined with the signal stages for DVB-IF processing.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9817 is an integrated circuit for single standard visionIF signal processing and FMdemodulation. The TDA9818 is an integrated circuit for multistandard visionIF signal processing, soundAMandFM demodulation.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9817 is an integrated circuit for single standard visionIF signal processing and FMdemodulation. The TDA9818 is an integrated circuit for multistandard visionIF signal processing, soundAMandFM demodulation.
Mfg:PHI Pack:SSOP-5.2-28P D/C:6+ Vendor:Other Category:Other
The TDA9816M is an integrated circuit for multistandard vision IF signal processing, sound AM and FM demodulation and FM radio demodulation in multimedia sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9815 is an integrated circuit for multistandard vision IF signal processing (inclusive MAC) and sound AM and dual FM demodulation, with single reference QSS-IF in TV and VCR sets.
Mfg:PHILIPS Vendor:Other Category:Other
The TDA9814T is an integrated circuit for multistandard vision IF signal processing and sound AM and dual FM demodulation, with single reference QSS-IF in TV and VCR sets.
Mfg:PHILIPS Vendor:Other Category:Other
The TDA9813T is an integrated circuit for vision IF signal processing and sound dual FM demodulation, with singleeference QSS-IF in TV and VCR sets. For negative modulation standards only.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
regeneration (very linear demodulation, good The TDA9812/T is an integrated circuit for multistandard vision IF signal processing and AM and FM sound demodulation in TV and VTR sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9811 is an integrated circuit for multistandard vision IF signal processing and sound AM, with single reference QSS-IF in TV and VCR sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9810 is an integrated circuit for multistandard vision IF signal processing and sound AM demodulation, with single reference QSS-IF in TV and VCR sets.
Vendor:Other Category:Other
The TDA9809M is an integrated circuit for single standard vision IF signal processing, FM demodulation and FM radio demodulation in multimedia sets.
Mfg:PHI Pack:DIP Vendor:Other Category:Other
The TDA9808 is an integrated circuit for single standard (negative modulated) vision IF signal processing and FMdemodulation, with single reference QSS-IF in TV and VTR sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9806 is an integrated circuit for multistandard vision IF signal processing and FM sound demodulation in TV and VCR sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9802 is a monolithic integrated circuit for vision and sound IF signal processing in multistandard TV and VTR sets.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9801(T)is a monolithic integrate dcircuit for vision and sound IF signal processing in TV and VTR sets andmultimedia front-ends.
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9800 is a monolithic integrated circuit for vision and sound IF signal processing in TV and VTR sets.
Mfg:PHILIPS Pack:DIP D/C:03+ Vendor:Other Category:Other
The TDA9725 is an integrated circuit for chrominance and luminance processing (record and playback) in VHS taperecorders for PAL, SECAM/ME and NTSC systems (4.43MHz playback only) with internal filter and without ad...
Mfg:PHILIPS Pack:QFP Vendor:Other Category:Other
The TDA9615H is an audio control and processing circuit for VHS hi-fi video recorders, controlled via the I2C-bus. The device is adjustment-free using an integrated auto-calibration circuit. Extensive input and outpu...
Mfg:PH Pack:QFP Vendor:Other Category:Other
The TDA9614H is an audio processing IC for VHS hi-fi and linear audio, digitally controlled via the I2C-bus. The FM (de)modulator and peak noise reduction functions are highly integrated, resulting in few external co...
Vendor:Other Category:Other
The TDA9610H is a dual audio FM processing I2C for VHShi-fi audio, digitally controlled via the I2C-bus. TheFM(de)modulator and peak noise reduction functions are highly integrated, resulting in few external componen...
Vendor:Other Category:Other
The TDA9605H is a single-chip device in a small package that contains all the required functions, including the head amplifier, to realize the audio FM hi-fi stereo system in a VHS video recorder (see Fig.1). The dev...
Mfg:ST Pack:1680 Vendor:Other Category:Other
The TDA9556 is a triple-channel video amplifier designed in BCD technology (Bipolar/CMOS/ DMOS) able to drive the 3 cathodes of a CRT monitor.Perfectly matched with the ST Preamplifier TDA9210, it provides a high perform...
Pack:ZIP Vendor:Other Category:Other
DESCRIPTION The TDA9536 is a triple video amplifier with high voltage Bipolar/CMOS/DMOS technology (BCD) for use in color monitor application. Used with TDA9210 preamp in DC coupled mode, it provides for a low componen...
Mfg:PHILPS Pack:ZIP Vendor:Other Category:Other
The TDA9535 is a triple video amplifier with high voltage Bipolar/CMOS/DMOS technology (BCD) for use in color monitor application. Used with TDA9210 preamp in DC coupled mode, it provides for a low component, high per...
Mfg:ST Pack:ZIP-15 D/C:05+ Vendor:Other Category:Other
DESCRIPTION The TDA9533 is a triple video amplifier with high voltage Bipolar/CMOS/DMOS technology (BCD). It can drive the 3 cathodes of a monitor CRT in DC or AC coupling mode. A DCcoupling application is obtained by...
Mfg:STM Pack:SQL-15 D/C:98+ Vendor:Other Category:Other
The TDA9530 is a triple video amplifier with high voltage Bipolar/CMOS/DMOS technology (BCD). It can drive the 3 cathodes of a monitor CRT in DC or AC coupling mode. A DCcoupling application is obtained by connecting a t...
Mfg:STM Pack:TO220-7 D/C:00+ Vendor:Other Category:Other
The TDA9511 is a video amplifier designed with a high voltage Bipolar/CMOS/DMOS technology (BCD). It drives in DC coupling mode one cathode of a monitor and is protected against flashovers. It is available in Heptawatt p...
Vendor:Other Category:Other
The various versions of theTDA935X/6X/8X series combine the functions of a TV signal processor together with a m-Controller and US Closed Caption decoder. Most versions have a Teletext decoder on board. The Teletext deco...
Vendor:Other Category:Other
The TDA933xH series are display processors for 'High-end' television receivers which contain the following functions:` RGB control processor with Y, U and V inputs, a linear RGB input for SCART or VGA signals with fast b...
Mfg:ST Pack:TO220 Vendor:Other Category:Other
The TDA9302H is a monolithic integrated circuitin HEPTAWATTTM package. It is a high efficiencypower booster for direct driving of vertical windings of TV yokes. It is intended for use in Color and B &W television as ...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9206 is a digitaly controlled wideband video preamplifier intended for use in high resolution colormonitor. All controls and adjustmentsare digitaly performed thanks to I2C serial bus. Contrast, brigh...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9203A is a digitaly controlled wideband video preamplifier intended for use in mid range color monitor. All controls and adjustments are digitaly performed thanks to I2C serial bus. Contrast, brightness and DC out...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9201 is a wide band video amplifier intended for high resolution monochrome or color monitors.The BRIGHTNESS and CONTRAST are DC controlled.The brightness loop includes a comparator gated by an internally generate...
Pack:2500 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9183 is a an adaptive NTSC comb filter with twointernal delay lines, filters, clock control and input clamps.The NTSC M video standard is supported.Two CVBS input signals can be selected by me...
Pack:2500 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9181 is a an adaptive PAL/NTSC comb filter with two internal delay lines, filters, clock control and input clamps. Video standards PAL B, G, H, D, I, M and N and NTSC M are supported. Two CVB...
Mfg:PHI Pack:1998 Vendor:Other Category:Other
The TDA9178 is a transparent analog video processor with YUV input and output interfaces. It offers three main functions: luminance vector processing, colour vector processing and spectral processing. Beside these thr...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9177 is an I2C-bus controlled sharpnessimprovement IC with additional inputs for 6-bitanalog-to-digital conversion to facilitate additionalparameter measurement (e.g. ambient light control).It should preferably ...
Mfg:PHILIPS Pack:DIP D/C:8 Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9176 is a Luminance Transient Improvement (LTI) IC which is suitable for operation in both 50 and 100 Hz environments. The device can be used in conjunction with both LCD and CRT displays. Th...
Mfg:PHILIPS Pack:2500 Vendor:Other Category:Other
The TDA9171 is a transparent analog video processor with YUV input and output interfaces.The luminance transfer is controlled in a non-linear way by the distribution, in 5 discrete histogram sections, of the luminance va...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA9170 is a transparent analog video processorwith a YUV interface. It offers three main luminanceprocessing functions any combination of which can beselected. The luminance transfer is controlled in a non-linear...
Mfg:PHI Pack:DIP Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9160 is an I 2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/processor. The device contains horizontal and vertical drive outputs and an east-west correction drive circuit. The TDA91...
Mfg:PHI Pack:DIP-20 D/C:00+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9151B is a programmable deflection controller contained in a 20-pin DIP package and constructed usingBIMOS technology. This high performance synchronization and DC deflection processor has be...
Pack:DIP D/C:05+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9150B is a programmable deflection controller contained in a 20-pin DIP package and constructed using BIMOS technology. This high performance synchronization and DC deflection processor has ...
Mfg:DIP Pack:. D/C:03+ Vendor:Other Category:Other
The TDA9144 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor with helper demodulator for PALplus signals and blanking facilities for PALplus and EDTV-2 signals. The TDA9144 has been design...
Mfg:PHILIPS Pack:DIP Vendor:Other Category:Other
The TDA9143 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor with blanking facilities for PALplus and EDTV-2 signals. The TDA9143 has been designed for use with baseband chrominance delay...
Mfg:PHIL D/C:04+ Vendor:Other Category:Other
GENERAL DESCRIPTION The TDA9141 is an I2C-bus controlled, alignment-free PAL/NTSC/SECAM decoder/sync processor. The TDA9141 has been designed for use with baseband chrominance delay lines, and has a combined subcarrier...
Mfg:STM Pack:DIP-32 D/C:03+ Vendor:Other Category:Other
The TDA9116 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi-frequency c...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9115 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plasticpackage. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9113 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mul...
Mfg:ST Pack:DIP32 D/C:03+ Vendor:Other Category:Other
DESCRIPTIONThe TDA9112A is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or multi...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9112 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mult...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9111 is a monolithic integrated circuit assembled in a 32-pin shrink dual-in-line plastic package. This IC controls all the functions related to horizontal and vertical deflection in multimode or mul...
Mfg:SEC Pack:DIP-32 D/C:01+ Vendor:Other Category:Other
The TDA9110 is a monolithic integrated circuit assembled in 32-pin shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequen...
Vendor:Other Category:Other
The TDA9109SN is a monolithic integrated circuit assembledin 32-pinshrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequ...
Mfg:ST Vendor:Other Category:Other
The TDA9109S is a monolithic integrated circuit assembled in 32-pin shrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or multi-frequ...
Vendor:Other Category:Other
DESCRIPTION The TDA9109N is a monolithic integrated circuit assembledin 32-pin shrinkdual in lineplasticpackage.This IC controls all the functions related to thehorizontal and vertical deflection in multimode ormulti-fr...
Mfg:STM Pack:DIP-32 D/C:04+ Vendor:Other Category:Other
DESCRIPTION The TDA9109A is a monolithic integrated circuit assembled in a 32-pin shrink dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimode or...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9109/N is a monolithic integrated circuit assembledin 32-pin shrinkdual in lineplasticpackage.This IC controls all the functions related to thehorizontal and vertical deflection in multimode ormulti-f...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9108 is a horizontal deflection processor specially designed for monitor applications. The H-drive output duty cycle, the horizontal frequency and the horizontal position are DC adjustable ; it accepts both POS/NE...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9106A is a monolithic integrated circuit assembled in 42 pins shrunk dual in line plastic package.This IC controls all the functionsrelated to the horizontal and vertical deflection in multimodes or m...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9106 is a monolithic integrated circuit assembled in 42 pins shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimodes or multi-frequ...
Mfg:STM Pack:DIP-42 D/C:97+ Vendor:Other Category:Other
DESCRIPTION The TDA9105A is a monolithic integrated circuit assembled in a 42 pins shrink dual inline plastic package.This IC control sal lthe functions related to the horizontal and vertical deflection in multimodes o...
Mfg:ST Pack:DIP-42/ Vendor:Other Category:Other
The TDA9105 is a monolithic integrated circuit assembled in a 42 pins shrink dual in line plastic packageThis IC controls all the functions related to the horizontal and vertical deflection in multimodes or multisync m...
Mfg:ST Pack:DIP Vendor:Other Category:Other
The TDA9103 is a monolithic integrated circuit assembled in a 42 pins shrunk dual in line plastic package. This IC controls all the functions related to the horizontal and vertical deflection in multimodes or multisync...
Vendor:Other Category:Other
DESCRIPTION The TDA9102T is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102T is supplied in a 20 pin...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9102F is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102F is supplied in a 20 ...
Mfg:ST Pack:DIP Vendor:Other Category:Other
DESCRIPTION The TDA9102C/T is a monolithic integrated circuit for horizontal and vertical sync processing in monochrome and color video displays driven by input TTL compatible signals. The TDA9102C/T is supplied in a 20...
Vendor:Other Category:Other
The TDA8961 is an Advanced Television Systems Committee (ATSC)-compliant demodulator and FEC decoder for reception of 8-VSB modulated signals forterrestrial and cable applications: · Terrestrial: reception of 8-VSB modul...
Vendor:Other Category:Other
The TDA8960 is an ATSC-compliant demodulator and forward error correction decoder for reception of 8-VSB modulated signals for terrestrial and cable applications: ` Terrestrial: reception of 8-VSB modulated signals via s...
Vendor:Other Category:Other
The TDA8953 is designed as one kind of stereo or mono high-efficiency Class D audio power amplifier device that combines the benefits of Class D efficiency with audiophile sound quality comparable to that associated with...
Vendor:Other Category:Other
The TDA8950 is designed as one kind of high-efficiency Class D audio power amplifier device that is available in both HSOP24 and DBS23P power packages. The amplifier operates over a wide supply voltage range from ±12.5 V...
Vendor:Other Category:Other
The TDA8948J is designed as one kind of 4-channel audio amplifier device that contains four identical audio power amplifiers. This device can be used in (1)Television; (2)PC speakers; (3)Boom box; (4)Mini and micro audio...
Vendor:Other Category:Other
The TDA8947J has the following features including SE: 1 W to 25 W, BTL: 4 W to 50 W operation possibility (2.1 system);Soft clipping;Standby and mute mode;No on/off switching plops;Low standby current;High supply voltage...
Mfg:PHILIPS Vendor:Other Category:Other
The TDA8946J is a dual-channel audio power amplifier with an output power of 2 *15 W at an 8 load and a 18 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/...
Vendor:Other Category:Other
The TDA8946AJ is designed as one kind of dual-channel audio power amplifier device that has an output power of 2 x 15 W at an 8 load and an 18 V supply. This device can be used in (1)Mains fed applications (e.g. TV soun...
Mfg:PHILIPS Pack:ZIP Vendor:Other Category:Other
The TDA8945S is a single-channel audio power amplifier with an output power of 15 W at an 8 load and an 18 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-NPN output stage and standby/mute...
Vendor:Other Category:Other
The TDA8945 is designed as one kind of single-channel audio power amplifier device that can be used in wide range of applications such as:(1)Mains fed applications (e.g. TV sound); (2)PC audio; (3)Portable audio. Also th...
Mfg:PHILIPS Pack:SIP Vendor:Other Category:Other
The TDA8944J is a dual-channel audio power amplifier with an output power of 2 * 7 W at an 8 load and a 12 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/m...
Vendor:Other Category:Other
The TDA8944AJ is a dual-channel audio power amplifier with DC gain control. It has an output power of 2 ´ 7 W at an 8 W load and a 12 V supply. The circuit contains two Bridge-Tied Load (BTL) amplifiers with an all...
Vendor:Other Category:Other
The TDA8943SF is a single-channel audio power amplifier with an output power of 6 W at an 8 load and a 12 V supply. The circuit contains a Bridge Tied Load (BTL)amplifier with an all-NPN output stage and standby/mute ...
Mfg:PHILIPS Pack:DIP-16P D/C:2002 Vendor:Other Category:Other
The TDA8942P is a dual-channel audio power amplifier for an output power of 2 *1.5 at a 16 load and a 9 V supply. The circuit contains two Bridge Tied Load (BTL) amplifiers with an all-NPN output stage and standby/mute...
Vendor:Other Category:Other
The TDA8941P is a single-channel audio power amplifier with an output power of 1.5 W at an 16 load and a 9 V supply. The circuit contains a Bridge Tied Load (BTL) amplifier with an all-NPN output stage and standby/mute ...
Vendor:Other Category:Other
Zero dead time Class-D 7.5 A power comparatorThe TDA8939 is a power comparator designed for use in a high efficiency class-D audio power amplifier system.It contains power switches, drive logic, protection circuitry, bia...
Vendor:Other Category:Other
The TDA8933B is designed as one kind of high-efficiency class-D audio power amplifier device that remains operating with considerable music output power without the need for an external heat sink, even for high supply vo...
Vendor:Other Category:Other
The TDA8933 is a high efficiency class-D amplifier with low power dissipation.The continuous time output power is 2 ´ 10 W in a stereo half bridge application (RL = 8 W) or 1 *20 in a mono full bridge application ...
Vendor:Other Category:Other
The TDA8932BT/N2 is designed as one kind of high-efficiency class-D audio power amplifier device that has two full-differential inputs driving two independent outputs. Also this device can be used in (1)flat panel televi...
Vendor:Other Category:Other
The TDA8932B is a high efficiency class-D amplifier with low power dissipation.The continuous time output power is 2 ´ 15 W in stereo half-bridge application (RL = 4 ) or 1 ´ 30 W in mono full-bridge applicat...
Vendor:Other Category:Other
The TDA8931 is a switching power stage for high efficiency class-D audio power amplifier systems.It contains a Single-Ended (SE) power stage, drive logic, protection control logic, a full differential input comparator an...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.