© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The TA8246H is dual power amplifier for consumer applications. This IC provides an output power of 6 watts per channel. It is suitable for power amplifier of TV and home stereo.
The features of TA8246H are: (1)high outp...
Vendor:Other Category:Other
The TA8246AH is dual power amplifier for consumer applications. This IC provides an output power of 6 watts per channel. It is suitable for power amplifier of TV and home stereo.
The features of TA8246AH are: (1)high ou...
Vendor:Other Category:Other
The TA8244H isvoltage regulator IC,designed for car audio application,has built-in 4 outputs.Since each output consist of PNP transistor,the input output differential voltage : VDEF is very small (VDEF=0.3V(Typ.)).In add...
Vendor:Other Category:Other
The TA8238K is a kind of 7.3W*2CHdual audio power amplifier for consumer application. It contains various kind of protectors and the function of stand-by switch.
The features of TA8238K can be summarized as (1)output po...
Vendor:Other Category:Other
The TA8233H is a kind of thermal resistance j-T package which designed for low thermal resistance, has high efficiency of heat radiation. The temperature rise of chip can be reduced, and the influence from the degradatio...
Vendor:Other Category:Other
The thermal resistance j−T of TA8233BH package designed for low thermal resistance, has high efficiency of heat radiation.The temperature rise of chip can be reduced, and the influence from the degradation of the f...
Vendor:Other Category:Other
The TA8233AH is a kind of thermal resistance j-T package which is designed for low thermal resistance, has high efficiency of heat radiation. The temperature rise of chip can be reduced, and the influence from the degrad...
Vendor:Other Category:Other
The TA8232F is battery charger IC for lead batterys and applicable to various types from 1 to 6cells. Simple system with minimized external components is avaliable.
The features of TA8232F are: (1)applicable to various ...
Vendor:Other Category:Other
The TA8231L is BTL audio power amplifier for consumer application. It is designed for high power, low distortion and low noise. It contains various kind of protectors and the function of stand-by.
The features of TA8231...
Vendor:Other Category:Other
The TA8229K is an audio power IC with built-in two channels developed for portable radio cassete tape recorder with power ON/OFF switch.Because of the parts reduction and SIP (single inline package),space merit is remark...
Vendor:Other Category:Other
The TA8227P is an audio power IC with built-in two channels developed for portable radio cassette tape recorder with power ON/OFF switch. The features of TA8223K are: (1)stand-by switch; (2)soft clip; (3)built-in thermal...
Mfg:UTC Pack:DIP-12 D/C:00+ Vendor:Other Category:Other
The UTC TA8227AP is an audio power IC with built-in two channels developed for portable radio cassette tape recorder with power ON / OFF switch.Because of the parts reduction and DIP, space merit is remarkable.Thermal sh...
Vendor:Other Category:Other
The TA8225H, TA8225L is a kind of BTL audio power amplifier for consumer application which is designed for high power, low distortion and low noise. It contains various kind of protectors and the function of stand-by SW....
Vendor:Other Category:Other
The TA8224H isvoltage regulator IC,designed for compact disc player use,built in 3 outputs and reset circuit.In addition,protectors for over voltage,output short and thermal shut down are involved.
Features of the TA822...
Vendor:Other Category:Other
The TA8223K is an audio power IC with built-in two channels developed for portable radio cassette tape recorder with power ON/OFF switch. Thermal shut down protection circuit is built in. The features of TA8223K are: (1)...
Vendor:Other Category:Other
The TA8221AH is a kind of thermal resistance j-T package which is designed for low thermal resistance, has a high efficiency of heat radiation. This stereo audio power IC, designed for car audio use, has two built-in cha...
Vendor:Other Category:Other
The thermal resistance j-T of TA8220H package designed for low thermal resistance, has high efficiency of heat radiation.The temperature rise of chip can be reudced, and the influence form the degradation of the features...
Vendor:Other Category:Other
The TA8218AH is 3 channel audio amplifier for consumer applications. This IC provides an output power of 6W per channel. It is suitable for power amplifier of TV and home stereo. The features of TA8218AH are: (1)built-in...
Vendor:Other Category:Other
The TA8217P is dual audio power amplifier designed for the audio power amplifier of portavle radio cassette tape recorder.
The features of TA8217P are: (1)high output power: Pout=2.5W; (2)soft clip; (3)buit-in thermal s...
Vendor:Other Category:Other
The TA8216H is dual audio power amplifier for consumer applications. This IC contains an output power of 13 watts per channel. It is suitable for power amplifier of TV and home stereo.
The features of TA8216H are: (1)hi...
Vendor:Other Category:Other
The thermal resistance j-T of TA8215H package designed for low thermal resistance, has a high efficiency of heat radiation. This stereo audio power IC, designed for car audio use, has two built-in channels to reduce the ...
Vendor:Other Category:Other
The TA8214K is voltage regulator IC,designed for car audio use,has built-in 4 outputs.(fixed 1 output and changed 3 outputs).In addition,protectors for over voltage,output short and thermal shut down are involved.
Featu...
Vendor:Other Category:Other
The TA8213K is audio power amplifier for consumer applications. This IC provides an output power of 6W, it is suitable for power amplifier of TV.
The features of TA8213K are: (1)high output power: Pout=6W; (2)low noise:...
Vendor:Other Category:Other
The TA8212F is a kind of 4ch power driver IC developed for controlling a pickup focus actuator coil, disc motor, tracking actuator coil and feed motor of CD players. In addition, the TA8212F is also best suited for use a...
Mfg:TOS Pack:SQL-12 D/C:02+ Vendor:Other Category:Other
The TA8211AH is dual audio power amplifier for consumer applications.This IC provides an output power of 6 watts per channel (at VCC = 20 V, f = 1 kHz, THD = 10%, RL = 8 ).It is suitable for power amplifier of TV and hom...
Vendor:Other Category:Other
The TA8210AH is a kind of audio power amplifier. This stereo audio power IC, designed for car audio use, has two built-in channels to reduce the characteristic difference between L and R channels. In addition, the functi...
Vendor:Other Category:Other
The TA8208H is a kind of dual audio power amplifier for consumer applications which is designed for high power, low distortion and low noise and it also contains various kind of protectors. It is suitable for car-audio p...
Mfg:TOSHIBA Pack:ZIP Vendor:Other Category:Other
TA8207K is an audio power IC with built−in two channels developed for portable radio cassette tape recorder with power on/ off switch.Because of the parts reduction and SIP (single inline package), space merit is r...
Vendor:Other Category:Other
The thermal resistance j-T of TA8205AH, TAS205AL package designed for low thermal resistance which has a high efficiency of heat radiation. This stereo audio power IC, designed for car audio use, has two built-in channel...
Vendor:Other Category:Other
The TA8204 is an audio power IC with built−in two channels developed for portable radio cassette tape recorder with power on/ off switch. Because of the parts reduction and SIP (single inline package), space merit ...
Vendor:Other Category:Other
The TA8201AK is audio power amplifier for consumer application which is applying BTL system in which output coupling condenser and bootstrap condenser are not necessary and output 17W(VCC=14.4V, BL=4, THD=10%) can be obt...
Vendor:Other Category:Other
The TA8200AH is dual audio power amplifier for consumer applications. This IC contains an output power of 12 watts per channel. It is suitable for power amplifier of TV and home stereo.
The features of TA8200AH are: (1)...
Vendor:Other Category:Other
The TA81Z6S, TA8126F are DC/DC converter ICs. They are designed for biasing varactor diodes of tuner system. Those items are especially suitable for supplying high voltage (about 15V/30V) for electric tuning (FM/TV/UHF I...
Vendor:Other Category:Other
The TA8198F is a DC/DC converter IC which is developed for biasing varactor diodes of tuner system. The features of TA8223K are: (1)few external parts; (2)excellent spurious radiation by oscillation of sine wave; (3)buil...
Vendor:Other Category:Other
The TA8194Z is a muting IC to prevent the "POP" noise made at time of power ON and OFF of audio equipments.This IC has 4 sensor terminals,muting control terminal and supply control terminal.In case of sensing voltage ris...
Vendor:Other Category:Other
The TA8193S is dual line output amplifier designed for audio use. The features of TA8223K are: (1)suitable for line output amplifier; (2)built-in feedback resistor; (3)few external parts; (4)fixed voltage gain: GV=20dB; ...
Vendor:Other Category:Other
The TA8192F is a power driver IC developed for CD players.It controls the focus/tracking coil of a 3-beam pickup head,the disc motor and feed motor.
Features of the TA8192F are:(1)BTL power drivers for 2 channels;(2)cir...
Vendor:Other Category:Other
The TA8190F, TA8191F is a kind of 3-beam type PUH compatible focus tracking servo LSIs to be used in the CD player system. In combination with a CMOS single chip processor TC9236AF, a CD player system can be composed ver...
Vendor:Other Category:Other
The TA8189N is a Quad pre amplifier designed for use in record/play back amplifier.It is suitable for double cassette tape recorder.
Features of the TA8189N are:(1)play back Amp: built in input select switch,built in eq...
Vendor:Other Category:Other
The TA8186P is the AM/FM lF+MPX system IC, which is designed for radio cassette recorders and music centers. If you want to know more about this IC, please go to our website.
The features of TA8186P can be summarized as...
Vendor:Other Category:Other
The TA8184P is DC controlled dual volume, balance, tone IC. It is suitable for car stereo, ratio cassette, music center, TV multiplex sound reveiver and remote controlled applications.
The features of TA8184P are: (1)du...
Vendor:Other Category:Other
The TA8182FN is a TV/FM system front end IC,which is developed for headphone radio in 1.5V use.It is built in FM F/E and TV F/E (japanese VHF namd).
Features of the TA8182FN are:(1)built-in FM F/E and TV F/E FM mode is ...
Vendor:Other Category:Other
The TA8176F is FM front end ICs which are designed for radio cassette players and music centers.It is suitable for digital tuning system applications.
Features of the TA8176F are:(1)improved inter-modulation characteris...
Vendor:Other Category:Other
The TA8173AP is the sound field reproduction IC developed for use on such stereo equipment as radio cassette tape recorder,multivoise TV set.etc.This IC has made it possible to reproduce stereophonic sound with more pres...
Vendor:Other Category:Other
The TA8168SN is a FM front-end IC which is designed for radio cassette recorders and music centers.Comparing with conventional types,RF inter-modulation characteristics and overload characteristics are improved.
Feature...
Vendor:Other Category:Other
The TA8167N is the AM/FM 1chip tuner IC which is designed for portable radios and 3V Headphone radios possessing the weight of 1.2g. If you want to know more about this IC, please go to our website for the detail informa...
Vendor:Other Category:Other
The TA8164P is a kind of AM/FM Tuner (FM F/E+AM/FM IF) IC which is designed for AM/FM monaural radio. Combining with the TA7368P (Mono PW IC), a suitable monaural AM/FM radio system is able to be constituted. If you want...
Vendor:Other Category:Other
The TA8162SN is dual preamplifier designed for car stereo tape deck. This IC contains dual preamplifier and metal/normal tape equalizer control switches.
The features of TA8162SN are: (1)high open loop voltage gain: GVO...
Vendor:Other Category:Other
The TA8161F is a DC/DC converter system IC, which is developed for supplying a voltage(for 2.5V or 5V) for CMOS IC etc.
The features of TA8161F are: (1)output voltage can be switched over to 2.5V or 5V; (2)built-in back...
Vendor:Other Category:Other
The TA8159FN is built in dual auto-reverse pre amplifiers, dual OCL power amplifiers, and a ripple filter and it is developed for play-back stereo headphone equipments (1.5V use).
The features of TA8159FN can be summari...
Vendor:Other Category:Other
The TA8158F is low operation voltage FM front end IC for the portable equipments which is suitable for the headphone stereo radios and radio cassette players.
Features of the TA8158F are:(1)wide supply voltage range : V...
Vendor:Other Category:Other
The TA8157AF is developed for play-back stereo headphone equipments at low voltage operation(1.5V use).
Features of the TA8157AF are:(1)OCL (output condenser less);(2)built-in ripple filter;(3)output power(Vcc=1.5V,f=1k...
Vendor:Other Category:Other
The TA8155F is REC/PB system dual pre amplifier ICs,which are developed for low voltage operation (1.5/3V use).These are especially suitable for a stereo headphone cassette player.
Features of the TA8155F are:(1)built-i...
Vendor:Other Category:Other
The TA8145FN is a stereo headphone power amplifier IC,wgich is developed for low voltage operation (1.5V).It is especially suitable for a stereo headphone cassette player.
Features of the TA8145FN are:(1)OCL (output con...
Vendor:Other Category:Other
The TA8142AP is a Quad pre amplifier designed for use in record/play back pre amplifier of tape recorder.It is suitable for a double radio cassette recorder.
Features of the TA8142AP are:(1)built-in playback amplifiers;...
Vendor:Other Category:Other
The TA8136S is designed for a 1 chip transmitter IC including pulse generator,duty control mixer,carrier oscillator,and RF power amplifier.This IC has 7 control modes by combination of external switches (SW1 and SW2).
F...
Mfg:TOSHIBA Pack:DIP Vendor:Other Category:Other
TA8132AN, TA8132AF and TA2012N, TA2012F are the AM / FM IF+ST DET system ICs, which are designed for DTS radios.These are included many functions and these can be used for digital tuning system with IF counter.
Mfg:TOS Pack:N/A D/C:00+ Vendor:Other Category:Other
TA8132AN, TA8132AF and TA2012N, TA2012F are the AM / FM IF+ST DET system ICs, which are designed for DTS radios.These are included many functions and these can be used for digital tuning system with IF counter.
Vendor:Other Category:Other
The TA8127N is the AM/FM 1Chip Tuner ICs, which are designed for portable radios and 3V headphone radios. The weight of TA8127N is 1.2g(typ.). If you want to know more about this IC, please go to our website.
The featur...
Vendor:Other Category:Other
The TA8125S is a dual output preamplifier designed for car or home use. The features of TA8223K are: (1)high open loop voltage gain: GVO=100dB at f=kHz; (2)excellent channel separation and high ripple rejection: CHsep=65...
Vendor:Other Category:Other
The TA8122AN/AF are the AM/FM 1chip tuner ICs which are designed for portable radios and 3V headphone radios. If you want to know more about this IC, please go to our wensite.
The features of TA8122AN can be summarized ...
Vendor:Other Category:Other
The TA8120P is a kind of C-QUAMAM stereo decoding and pilot detection system IC which contains L+R signal detector, L-R signal detector, pilot signal detector and matrix circuit. It is suitable for DTS automoble radio an...
Vendor:Other Category:Other
The TA8119P is developed for play-back stereo headphone player (3V use),which is built-in preamplifiers,power amplifiers (for headphone) and DC volume controls.
Features of the TA8119P are:(1)built-in DC volume controls...
Vendor:Other Category:Other
The TA8115N is developed for auto reverse play back headphone cassette paly (3V use). The pre-amplifiers are independent of the headphone drivers, the voltage gains of which are fixed at 27 dB (typ.). Features of the TA8...
Vendor:Other Category:Other
The TA8106F is dual headphone amplifier IC designed for low voltage operation (1.5V,3.0V),which is suitable for stereo headphone ratio and radio cassette recorder equipments.This item can realize the low power dissipatio...
Vendor:Other Category:Other
The TA8083P contains two motor driver circuits with a current capacity of 0.5A for dirving bidirectional DC motors. Inputs Dl1A/B and Dl2A/B are combined to select one of forward, reverse, stop, and brake modes.
The fea...
Vendor:Other Category:Other
The TA8083F contains two motor driver circuits with a current capacity of 0.5A for dirving bidirectional DC motors. Inputs Dl1A/B and Dl2A/B are combined to select one of forward, reverse, stop, and brake modes.
The fea...
Vendor:Other Category:Other
The TA8082H contains two motor driver circuits with a current capacity of 1.5A for dirving bidirectional DC motors. Inputs Dl1A/B and Dl2A/B are combined to select one of forward, reverse, stop, and brake modes.
The fea...
Vendor:Other Category:Other
The TA8081P is a 0.7A motor driver which directly drivers a bidirectional DC motor. Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or other control system. Inputs Dl1 and DIZ are combi...
Vendor:Other Category:Other
The TA8080K is a 1.0A motor driver which directly drivers a bidirectional DC motor. Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or other control system. Inputs DI1 and DI2 are combi...
Vendor:Other Category:Other
The TA8069F is built into four 0.5A low-side driver ICs which drive lamp, relay, and solenoid actuators. lnputs from DI1, DI2, DI3, and DI4 switch ON and OFF modes. lnputs are TLL-compatible, thus the device can also be ...
Vendor:Other Category:Other
The TA8068L is a stepping motor driver with a current capacity of 1.5A. Inputs INA and INB are combined to control the four outputs. Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or o...
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
The TA8068F is a stepping motor driver with a current capacity of 1.5A. Inputs INA and INB are combined to control the four outputs.Since the inputs are TTL-compatible, this IC can be controlled directly from a CPU or ot...
Vendor:Other Category:Other
The TA8066AS is a 0.3A low side driver containing two circuits in one package. The features of TA8223K are: (1)2 circuit in one package; (2)output current capacity: 0.3A; (3)low standby current: 100A; (4)protective funct...
Vendor:Other Category:Other
The TA8063F is built into for 0.5A High-side driver ICs which drive lamp, relay, and solenoid actuators and the device is equipped with low-standby (with all outputs off), self-diagnosis, and protection functions. lnputs...
Vendor:Other Category:Other
The TA8062S is a 0.3A highside driver containing two circuits in one package. The features of TA8223K are: (1)2 circuit in one package; (2)output current capacity: 0.3A; (3)protactive function: over-voltage protection; (...
Vendor:Other Category:Other
The TA8062AS is a 0.3A highside driver containing two circuits in one package. The input level is TTL compatible so that the output can be controlled directly from CPU system and the like. The features of TA8062AS are: (...
Vendor:Other Category:Other
The TA8061H is a 1.5A highside driver containing two circuit. Each circuit has a self-diagnostic function which produces a diagnostic output. The input is TTL-compatible.
The features of TA8061H are: (1)output current c...
Vendor:Other Category:Other
The TA8053H is a kind of bidirectional DC motor driver with a current capacity of 3A. The IC also incorporates various protective functions as well as a self-diagnostic function for diagnostic output. The inputs are TTL-...
Vendor:Other Category:Other
The TA8052S is a full-bridge driver which directly drives a bidirectional DC motor. Since the inputs are TTL-compatible, the IC can be directly controlled from a CPU or other control system. The IC also has various prote...
Vendor:Other Category:Other
The TA8052AS is a full-bridge driver which directly drives a bidirectional DC motor. Since the inputs are TTL-compatible, the IC can be directly controlled from a CPU or other control system. The IC also has various prot...
Vendor:Other Category:Other
The TA8051P is a bidirectional DC motor driver with a current capacity of 3A. The inputs are TTL-compatible, and separate power supplies are provided for the logic and output sections. Inputs DI1 and DI2 are combined to ...
Vendor:Other Category:Other
The TA8050P is a kind of 0.7A motor driver which directly drivers a bidirectional DC motor. Inputs DI1 and DI2 are combined to select one of forward, reverse, stop, and brake modes. Since the inputs are TTL-compatible, t...
Mfg:TOSHIBA Pack:SOP20 D/C:08+ Vendor:Other Category:Other
The TA8050F is a 1.5 A motor driver which directly drives a bidirectional DC motor. Inputs DI1 and DI2 are combined to select one of forward, reverse, stop, and brake modes. Since the inputs are TTL-compatible, this IC c...
Vendor:Other Category:Other
The TA8050AK is a kind of 1.5A bi-directional DC motor driver and it can switch forward, reverse, stop and brake mode with input DI1 and DI2. Protective functions are built in to protect IC and load from destruction caus...
Vendor:Other Category:Other
The TA8045BF is designed especially for microcomputer system in automobiles and is capable of providing output voltage 5±0.15V without any adjustment. This IC incorporates the system reset function, that is, low voltage ...
Vendor:Other Category:Other
The TA8044F is designed specifically for use in 3.3V microcomputers,this IC contains two constand-voltage power supplies for 3.3V and 5V uses and various system reset functions.For a system reset,it has a low-voltage mon...
Mfg:TOS Pack:SOP D/C:07+ Vendor:Other Category:Other
Designed specifically for use in 3.3V microcomputers, this TA8044AF contains two constant-voltage power supplies for 3.3V and 5V uses and various system reset functions.This TA8044AF's Power Supply Output 1 provides an o...
Vendor:Other Category:Other
The TA8042F is an IC specially designed for microcomputer systems. It features an accurate reference voltage of 5±0.15V and various system reset functions. The system reset includes a voltage monitor capable of switching...
Vendor:Other Category:Other
The TA8041HA is an IC specially designed for microcomputer systems. It incorperates a highly accurate 5±0.15V constant-voltage power supply and various system reset functions. The features of TA8223K are: (1)accurate out...
Vendor:Other Category:Other
The TA8030S is a system reset IC for 5V supply voltage system.It is specially designed for microcomputer systems.It incorporates a watchdog timer for monitoring microcomputer operation and has many reset functions,includ...
Vendor:Other Category:Other
The TA8030F is a system reset IC for 5V supply voltage system.It is specially designed for microcomputer systems.It incorporates a watchdog timer for monitoring microcomputer operation and has many reset functions,includ...
Vendor:Other Category:Other
The TA8029S is a small 9-pin SIP IC incorporating an accurate frequency/voltage converter and two voltage comparators.It has a schmitt input circuit and becomes active on the positive edge of the input.Its F/V output is ...
Vendor:Other Category:Other
The TA8028S is an IC designed to control automotive illumination systems. The features of TA8223K are: (1)output ON/OFF duty variable; (2)large output current: IOUT=300A; (3)regulated voltage circuit incorporated: 6.7V s...
Vendor:Other Category:Other
The TA8026P is designed as an automotive flasher controller.It can issue a rapied-flashing warning when a lamp failure occurs.It operates accurately in wide ranges of supply voltages and operating temperatures.
Features...
Vendor:Other Category:Other
The TA8026AP is designed as an automotive flasher controller. The features of TA8223K are: (1)large output current: IOUT=300mA; (2)low standby current: ICC=1.0mA; (3)reference voltage characterized by small temperature d...
Vendor:Other Category:Other
The TA8025P is a kind of pick up sensor interface IC which designed for making the output signal from electromagnetic pick up sensor and etc. waveform-shaping. The Vth of input has hysteresis that is division value betwe...
Vendor:Other Category:Other
The TA8025F is a kind of pick up sensor interface IC which designed for making the output signal from electromagnetic pick up sensor and etc. waveform-shaping. The Vth of input has hysteresis that is division value betwe...
Vendor:Other Category:Other
The TA8021S is an IC designed for automotive lamp failure detection.when a lamp failure occurs,it detects the resulting lamp current change from the voltage across the detection resistor RS.It has a reference voltage cha...
Vendor:Other Category:Other
The TA8020S is an IC designed for lamp failure detection. The features of TA8223K are: (1)two circuit served by separate power supplies; (2)high-performance input amplifier incorporated; (3)reference voltage characterize...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.