© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
DMB01: Multi-voltage timer with 7 knob selectable functions and 7 knob selectable time ranges within 0.1s and 100h. For mounting on DINrail (DMB01) or Plug-in (PMB01).
Vendor:Other Category:Other
The DM9801 is a physical-layer, single-chip, low-power transceiver for 1M Home Phoneline Network applications. On the media side, it provides an interface to a Home Phoneline wiring system. The reconciliation layer int...
Vendor:Other Category:Other
Vendor:Other Category:Other
The DM96S02 is a dual retriggerable and resettable monostable multivibrator. This one-shot provides excep-tionally wide delay range, pulse width stability, predictable accuracy and immunity to noise. The pulse width is...
Pack:DIP/16 Vendor:Other Category:Other
The DM96LS02 is a dual retriggerable and resettable monostable multivibrator. The one-shot provides exceptionally wide delay range, pulse width stability, predictable accuracy and immunity to noise. The pulse width is se...
Mfg:NS Pack:DIP Vendor:Other Category:Other
The DM96L02 is a dual TTL monostable multivibrator with trigger mode selection, reset capability, rapid recovery, internally compensated reference levels and high speed capability.Output pulse duration and accuracy depen...
Pack:DIP/16 Vendor:Other Category:Other
These DM9602 dual resettable, retriggerable one shots have two inputsper function; one which is active high, and one which is active low. This allows the designer to employ either leading-edge or trailing-edge triggering...
Mfg:DIVICOM Pack:QFP Vendor:Other Category:Other
These DM9601 retriggerable one shots provide the designer withfour inputs; two active high and two active low. This permits a choice of either leading-edge or trailing-edge triggering,independent of input transition time...
Mfg:NS Pack:DIP Vendor:Other Category:Other
The DM93S62 is a very high speed 9-input parity checker/generator for use in error detection and error correction applications. The DM93S62 provides odd and even parity for up to nine data bits. The even parity output ...
Vendor:Other Category:Other
The DM93S41 4-bit arithmetic logic units can perform all the possible 16 logic operations on two variables and a variety of arithmetic operations; the Add and Subtract modes are the most important.
Vendor:Other Category:Other
The DM93L38 is an 8-bit multiple port register designed for high speed random access memory applications where the ability to simultaneously read and write is desirable. A com-mon use would be as a register bank in a t...
Vendor:Other Category:Other
The DM93L28 is a high speed serial storage element pro-viding 16 bits of storage in the form of two 8-bit registers.The multifunctional capability of this DM93L28 device is provided by several features: 1) additional g...
Vendor:Other Category:Other
The DM93L14 is a multifunctional 4-bit latch designed for general purpose storage applications in high speed digital systems. All DM93L14 outputs have active pull-up circuitry to provide high capacitance drive and to p...
Vendor:Fairchild Semiconductor Category:Integrated Circuits (ICs)
IC DECODER/DRVR/LATCH 7SEG 16DIPThe DM9374N is designed as one kind of 7-segment decoder/driver with latches on the address inputs and active low constant current outputs to drive LEDs directly.This device accepts a 4-bit binary code and produces outpu...
Mfg:NS Pack:DIP D/C:04+ Vendor:Other Category:Other
The DM9374is a 7-segment decoder driver incorporating input latches and output circuits to directly drive common anode LED displays.
Vendor:Other Category:Other
The DM9370 is a 7-segment decoder driver incorporating input latches and output circuits to directly drive incandes-cent displays. DM9370 can also be used to drive common anode LED displays in either a multiplexed mode...
Vendor:Other Category:Other
The DM9368 is a 7-segment decoder driver incorporating input latches and constant current output circuits to drive common cathode type LED displays directly.
Vendor:Other Category:Other
The DM9338 is an 8-bit multiple port register designed for high speed random access memory applications where the ability to simultaneously read and write is desirable. A common use would be as a register bank in a three...
Vendor:Other Category:Other
The DM9334 is a high speed 8-bit Addressable Latch designed for general purpose storage applications in digitalsystems. It is a multifunctional device capable of storing single line data in eight addressable latches, and...
Vendor:Other Category:Other
TheDM9328 is a high speed serial storage element providing 16 bits of storage in the form of two 8-bit registers. The multifunctional capability of DM9328 is provided by several features: 1) additional gating is provided...
Mfg:1200 Vendor:Other Category:Other
The DM9324 expandable comparators provide comparison between two 5-bit words and give three outputsÐ``less than'',``greater than'' and ``equal to''. A HIGH on the active LOW Enable Input forces all three outputs LOW....
Vendor:Other Category:Other
The DM9321 consists of two independent multipurpose decoders, each designed to accept two inputs and provide four mutually exclusive outputs. In addition an active LOW enable input, which gives demultiplexing capability,...
Vendor:Other Category:Other
These DM9316 synchronous, presettable counters feature an internal carry look-ahead for application in high-speed countingdesigns. The DM9316 is a 4-bit binary counter. The carry output is decoded by means of a NOR gate,...
Vendor:Other Category:Other
The DM9314 is a multifunctional 4-bit latch designed for general purpose storage applications in high speed digital systems.All outputs have active pull-up circuitry to provide high capacitance drive and to provide low ...
Vendor:Other Category:Other
These DM9312 data selectors/multiplexers contain inverter/drivers to supply full complementary, on-chip, binary decoded data selection.The DM9312 is a single 8-bit multiplexer with complementary outputs and a strobe cont...
Vendor:Other Category:Other
These DM9309 data selectors/multiplexers contain inverter/drivers to supply full complementary, on-chip, binary decoded data selection.The 9309/DM9309 contains two separate 4-bit multiplexers with complementary Y and Y o...
Vendor:Other Category:Other
The DM9308 is a dual 4-bit D-type latch designed for general purpose storage applications in digital systems. Each latch of DM9308 contains both an active LOW Master Reset input an active LOW Enable inputs. The 74116 is ...
Vendor:Other Category:Other
The DM9301 is a physical-layer, single-chip, low-power media converter for 100BASE-TX/FX full duplex repeater applications. On the TX media side, DM9301 provides a direct interface to Unshielded Twisted Pair Cable 5 (U...
Mfg:DAVICOM Pack:05+ D/C:LQFP Vendor:Other Category:Other
The DM9161A is a physical layer, single-chip, and low power transceiver for 100BASE-TX and 10BASE-T operations. On the media side, it provides a direct interface either to Unshielded Twisted Pair Category 5 Cable (UTP5...
Mfg:DAVICOM Pack:QFP Vendor:Other Category:Other
The DM9161 is a physical layer, single-chip, and low power transceiver for 100BASE-TX and 10BASE-T operations. On the media side, it provides a direct interface either to Unshielded Twisted Pair Category 5 Cable (UTP5)...
Vendor:Other Category:Other
The DM9102D is a fully integrated and cost effective single chip Fast Ethernet NIC controller. It is designed with low power and high performance process. It is a 2.5/3.3V device with 5V tolerance.
The DM9102D pro...
Mfg:DAVI D/C:2006 Vendor:Other Category:Other
The DM9102A is a fully integrated and cost-effective single chip Fast Ethernet NIC controller. It is designed with the low power and high performance process. It is a 3.3V device with 5V tolerance then it supports 3.3V...
Vendor:Other Category:Other
The DM9095 twisted-pair Media Attachment Unit (TPMAU) is designed to allow Ethernet connections to use existing Twisted-pair wiring plants through an Ethernet Attachment Unit Interface (AUI). The DM9095 provides the e...
Vendor:Other Category:Other
The 10BASE-T Hub Controller (DM9081) provides a system level solution for designing IEEE-compliant 802.3 repeaters that incorporate 10BASE-T transceivers. DM9081 integrates the repeater functions specified by section 9...
Vendor:Other Category:Other
The DM9008 Ethernet controller is a highly integrated design that provides all Medial Access Control (MAC) and Encode-Decode (ENDEC) functions in accordance with the IEEE 802.3 standard. Network interfaces include 10BA...
Vendor:Other Category:Other
The DM9000EP is designed as one kind of fully integrated and cost-effective single chip Fast Ethernet MAC controller. And this device also provides a MII interface to connect HPNA device or other transceivers that suppor...
Mfg:DAVICOM Pack:TQFP D/C:0711+ Vendor:Other Category:Other
The DM9000A is a fully integrated and cost-effective low pin count single chip Fast Ethernet controller with a general processor interface, a 10/100M PHY and 4K Dword SRAM. It is designed with low power and high performa...
Mfg:DAVICOM Pack:QFP D/C:06+ Vendor:Other Category:Other
The DM9000 is a fully integrated and cost-effective single chip Fast Ethernet MAC controller with a general processor interface,a 10/100M PHY and 4K Dword SRAM. It is designed with low power and high performance proces...
Vendor:Other Category:Other
These DM8899 circuits are the TRI-STATE versions of the popular BCD to binary and binary to BCD converters DM74184 and DM74185A respectively They are derived from the 256-bit ROM DM8598 Emitter connections are made to ...
Vendor:Other Category:Other
These DM8898 circuits are the TRI-STATE versions of the popular BCD to binary and binary to BCD converters DM74184 and DM74185A respectively They are derived from the 256-bit ROM DM8598 Emitter connections are made to...
Vendor:Other Category:Other
These DM86LS62 circuits are TRI-STATE edge-triggered 8-bit IO reg-isters in parallel with 8-bit serial shift registers which are capable of operating in any of the following modes parallel load from IO pins to register...
Vendor:Other Category:Other
Vendor:Other Category:Other
These DM81LS98A devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
These DM81LS97A devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
These DM81LS96A devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
These DM81LS95A devices provide eight two-input buffers in each pack-age All employ the newest low-power-Schottky TTL tech-nology One of the two inputs to each buffer is used as acontrol line to gate the output into the ...
Vendor:Other Category:Other
The DM8108 is an 8 port 10/100Mbit/s nonblocking Ethernet switch with on-chip address-lookup engine. The DM8108 provides a low-cost, high-performance switch solution with PHYs and single SGRAM.
The DM8108 provides e...
Vendor:Other Category:Other
Vendor:Other Category:Other
This DM74S86 device contains four independent gates each of which performs the logic Exclusive-OR function.
Mfg:TOSHIBA Pack:DIP D/C:900 Vendor:Other Category:Other
This DM74S74 device contains two independent positive-edge-triggered D flip-flops with complementary outputs. The information on the D input is accepted by the flip-flops on the positive going edge of the clock pulse. T...
Mfg:NSC Pack:DIP D/C:1990 Vendor:Other Category:Other
This DM74S51 contains two independent combinations of gates each of which performs the logic AND-OR-INVERT function.
Vendor:Other Category:Other
This DM74S473 Schottky memory is organized in the popular 512 words by 8 bits configuration. A memory enable input is provided to control the output states. When DM74S473 is enabled, the outputs represent the contents of...
Vendor:Other Category:Other
This DM74S40 contains two independent gates each of which performs the logic NAND function.
Vendor:Fairchild Semiconductor Category:Integrated Circuits (ICs)
IC LATCH/FLIP FLOP OCT 3ST 20DIPThe DM74S374N is designed specifically for driving highly-capacitive or relatively low-impedance loads. The high-impedance state and increased high-logic-level drive provide these registers with the capability of being c...
Vendor:Other Category:Other
These DM74S374,8-bit registers feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high impedance state and increased high-logic-level drive provi...
Vendor:Other Category:Other
These 8-bit registers,DM74S373 feature totem-pole 3-STATE outputs designed specifically for driving highly-capacitive or relatively low-impedance loads. The high impedance state and increased high-logic-level drive prov...
Vendor:Other Category:Other
This DM74S32 contains four independent gates each of which performs the logic OR function.
Vendor:Other Category:Other
This DM74S30 contains a single gate which performs the logic NAND function.
Vendor:Other Category:Other
This DM74S299 Schottky TTL eight-bit universal register features multiplexed inputs/outputs to achieve full eight bit data handling in a single 20-pin package. Two function-select inputs and two output-control inputs can...
Vendor:Other Category:Other
The DM74S288 is organized in the popular 32 words by 8 bits configularation. The features of DM74S288 can be summarized as (1)advanced titanium-tungsten fuses; (2)schottky-clamped for high speed: address access down to 2...
Vendor:Other Category:Other
These DM74S283 full adders perform the addition of two 4-bit binary numbers. The sum () outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM74S283 adders feature full ...
Vendor:Other Category:Other
These universal, nine-bit parity generators/checkers, DM74S280 utilize Schottky-clamped TTL high-performance circuitry, and feature odd/even outputs to facilitate operation of either odd or even parity applications. The ...
Vendor:Other Category:Other
These DM74S257 Schottky-clamped high-performance multiplexers feature 3-STATE outputs that can interface directly with data lines of bus-organized systems. With all but one of the common outputs of DM74S257 disabled (at ...
Mfg:TOSHIBA Pack:DIP D/C:350 Vendor:Other Category:Other
Each of these DM74S253 Schottky-clamped data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR gates. Separate output control input...
Vendor:Other Category:Other
These DM74S244 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
These DM74S241 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
These DM74S240 buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/drivers employed as memory address drivers, clock driv- ers, and bus-oriented transmitters/receiver...
Vendor:Other Category:Other
This DM74S20 contains two independent gates each of which performs the logic NAND function.
Vendor:Other Category:Other
These DM74S194 bidirectional shift registers are designed to incorporate virtually all of the features a system designer may want in a shift register; they feature parallel inputs, parallel outputs, right-shift and left-...
Vendor:Other Category:Other
These DM74S182 circuits are high-speed, look-ahead carry generators, capable of anticipating a carry across four binary adders or groups of adders. They are cascadable to perform full look-ahead across n-bit adders. Carr...
Vendor:Other Category:Other
These DM74S175 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All have a direct clear input, and the quad (DM74S175) versions feature complementary outputs from each flip-fl...
Vendor:Other Category:Other
These DM74S174 positive-edge-triggered flip-flops utilize TTL circuitry to implement D-type flip-flop logic. All DM74S174 have a direct clear input, and the quad (DM74S175) versions feature complementary outputs from eac...
Mfg:NS Pack:2500 Vendor:Other Category:Other
These DM74S163 synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. They are 4-bit binary counters. The carry output is decoded by means of a NOR gate, th...
Vendor:Other Category:Other
These DM74S161 synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. They are 4-bit binary counters. The carry output is decoded by means of a NOR gate, th...
Vendor:Other Category:Other
These DM74S158 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sourc...
Mfg:TOSHIBA Pack:DIP D/C:800 Vendor:Other Category:Other
These DM74S157 data selectors/multiplexers contain inverters and drivers to supply full on-chip data selection to the four output gates. A separate strobe input is provided. A 4-bit word is selected from one of two sourc...
Mfg:TOSHIBA Pack:DIP D/C:1000 Vendor:Other Category:Other
Each of these DM74S153 data selectors/multiplexers contains inverters and drivers to supply fully complementary, on-chip, binary decoding data selection to the AND-OR-invert gates. Separate strobe inputs are provided fo...
Mfg:TOSHIBA Pack:DIP D/C:1100 Vendor:Other Category:Other
These DM74S151 data selectors/multiplexers contain full on-chip decoding to select the desired data source. The DM74S151 selects one-of-eight data sources. The DM74S151 has a strobe input which must be at a low logic le...
Vendor:Other Category:Other
This DM74S140 contains two independent line driver gates each of which performs the logic NAND function.
Vendor:Other Category:Other
These DM74S139 Schottky-clamped circuits are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these DM...
Mfg:NS D/C:06+ Vendor:Other Category:Other
These Schottky-clamped circuits DM74S138 are designed to be used in high-performance memory-decoding or data-routing applications, requiring very short propagation delay times. In high-performance memory systems these de...
Mfg:NS Vendor:Other Category:Other
This DM74S133 contains a single gate which performs the logic NAND function.
Vendor:Other Category:Other
This DM74S112 device contains two independent negative-edge-trig-gered J-K flip-flops with complementary outputs. The J and K data is processed by the flip- flops on the falling edge of the clock pulse. The clock trigger...
Vendor:Other Category:Other
This DM74S11 contains three independent gates each of which performs the logic AND function.
Vendor:Other Category:Other
This DM74S10 contains three independent gates each of which performs the logic NAND function.
Mfg: Pack:84 D/C:DIP Vendor:Other Category:Other
This DM74S09 device contains four independent gates each of which performs the logic AND function. The open-collector out-puts require an external pull-up resistor for proper logical operation.
Vendor:Other Category:Other
This DM74S08 device contains four independent gates each of which performs the logic AND function.
Vendor:Other Category:Other
This DM74S05 device contains six independent gates each of which performs the logic INVERT function. The open-collector outputs require external pull-up resistors for proper logical operation.
Vendor:Other Category:Other
This DM74S03 device contains four independent gates each of which performs the logic NAND function. The open-collector out-puts require external pull-up resistors for proper logical operation.
Vendor:Other Category:Other
This DM74S02 device contains four independent gates each of which performs the logic NOR function.
Vendor:Other Category:Other
This DM74S00 device contains four independent gates each of which performs the logic NAND function.
Mfg:NS Pack:DIP-18 Vendor:Other Category:Other
These DM74LS962 circuits are TRI-STATE edge-triggered 8-bit IO reg-isters in parallel with 8-bit serial shift registers which are capable of operating in any of the following modes parallel load from IO pins to registe...
Mfg:- Pack:DIP/SMD D/C:- Vendor:Other Category:Other
This DM74LS86 contains four independent gates each of which performs the logic exclusive-OR function.
Vendor:Other Category:Other
The DM74LS85ASJ is an dual positive-edge-triggered D flip-flops with preset,clear and complementary outputs.This device contains two independent positive-edge-trig-gered D flip-flops with complementary outputs. The info...
Vendor:Other Category:Other
These 4-bit magnitude comparators,DM74LS85 perform comparison of straight binary or BCD codes. Three fully-decoded decisions about two, 4-bit words (A, B) are made and are externally available at three outputs. These...
Vendor:Other Category:Other
These DM74LS83A full adders perform the addition of two 4-bit binary numbers. The sum () outputs are provided for each bit and the resultant carry (C4) is obtained from the fourth bit. These DM74LS83A adders feature full...
Vendor:Other Category:Other
These DM74LS75 latches are ideally suited for use as temporary storage for binary information between processing units and input/output or indicator units. Information present at a data (D) input is transferred to the Q ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.