About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index B : BH1416F,BH1415S,BGO807/FC0;,
BH1416F
Mfg:ROHM Pack:N/A D/C:07+ Vendor:Other Category:Other
The BH1416F is a FM stereo transmitter IC that transmits simple configuration. The IC consists of a stereo modulator for generating stereo composite signals and a FM transmitter for broadcasting a FM signal on the air....BH1415S
Vendor:Other Category:Other
The BH1415S/F are FM stereo transmitter ICs that transmit simple configuration. The ICs consist of a stereo modulator for generating stereo composite signals and a FM transmitter for broadcasting a FM signal on the air. ...BH1415FV
Vendor:Other Category:Other
The BH1415FV has 6 features.The first one is it is possible to attempt to improve a timbre because it has the pre-emphasis circuit,limiter circuit and low-pass filter circuit.The second one is built-in the pilot-tone sys...BH1415F
Mfg:ROHM Pack:SOP22 Vendor:Other Category:Other
The BH1415S/F are FM stereo transmitter ICs that transmit simple configuration. The ICs consist of a stereo modulator for generating stereo composite signals and a FM transmitter for broadcasting a FM signal on the air. ...BH1414K
Mfg:ROHM Pack:QFP D/C:08+ Vendor:Other Category:Other
The BH1414K is a FM stereo transmitter IC that uses a simple configuration. This IC consists of a stereo modulator for generating stereo composite signals and a FM transmitter for broadcasting a FM signal on the air. A h...BH12PB1WHFV
Vendor:Other Category:Other
The BH12PB1WHFV is one member of the BH12PB1 family which is designed as the auto power save CMOS type series regulator. The absolute maximum ratings of BH12PB1WHFV can be summarized as:(1)power supply voltage: -0.3 V to...BH 3798
Vendor:Other Category:Other
Flashtubes BH 3798 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathode...BH 1670
Vendor:Other Category:Other
Flashtubes BH 1670 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathode...BH 0647 (G)
Vendor:Other Category:Other
Flashtubes BH 0647 (G) are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cat...BGY925
Mfg:PHI D/C:09+ Vendor:Other Category:Other
The BGY925 is a three-stage UHF amplifier module in a SOT365A package. It consists of one NPN silicon planartransistor dieand twosilicon MOSFET diesmountedona metallized ceramic AlN substrate, together with matchingand b...BGY916
Vendor:Other Category:Other
The BGY916 is a three-stage UHF amplifier module in a SOT365A package. It consists of one NPN silicon planartransistor die and two silicon MOS-FET dies mounted on a metallized ceramic AlN substrate, together with matchin...BGY915
Vendor:Other Category:Other
The BGY916/5 is a three-stage UHF amplifier module in a SOT365A package. It consists of one NPN silicon planar transistor die and two silicon MOS-FET dies mounted on a metallized ceramic AlN substrate, together with matc...BGY89
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier module BGY89 for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of 24 V (DC). The module is intended for use as a line-extender.BGY888
Vendor:Other Category:Other
The BGY888 is designed as one kind of CATV amplifier modules. Hybrid high dynamic range amplifier module operating with a voltage supply of 24V in a SOT115J package. The high gain module consists of two cascaded stages...BGY887B
Vendor:Other Category:Other
Hybrid amplifier module BGY887B in a SOT115J package operating with a voltage supply of 24 V (DC). This high gain module consists of two cascaded stages, both in cascode configuration.BGY887
Vendor:Other Category:Other
Hybrid dynamic range amplifier BGY887 module in a SOT115J package operating with a voltage supply of 24 V (DC).BGY885B
Mfg:PHI D/C:09+ Vendor:Other Category:Other
The BGY885B is a hybrid amplifier module designed for CATV systems operating over a frequency range of 40 to 860 MHz at a voltage supply of 24 V (DC).BGY885A
Mfg:PHILIPS Pack:MODULE D/C:06+ Vendor:Other Category:Other
Hybrid amplifier module BGY885A for CATV systems operating over a frequency range of 40 to 860 MHz with a voltage supply of 24 V (DC).BGY883
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier module BGY883 designed for CATV systems operating over a frequency range of 40 to 860 MHz ata voltage supply of 24 V (DC).BGY88
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier module BGY88 for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of +24 V and intended for use as a line-extender.BGY87B
Mfg:TOSHIBA Pack:MODULE D/C:10 Vendor:Other Category:Other
Hybrid amplifier module BGY87B for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of +24 V.BGY87
Mfg:PHILIPS Vendor:Other Category:Other
Hybrid amplifier modules for CATV systems operating over a frequency range of 40 to 450 Mhz at a voltage supply of 24 V (DC). The BGY86 is intended for use as a pre-amplifier and the BGY87 as a final amplifier.BGY86
Mfg:PHILIPS Vendor:Other Category:Other
Hybrid amplifier modules for CATV systems operating over a frequency range of 40 to 450 Mhz at a voltage supply of 24 V (DC). The BGY86 is intended for use as a pre-amplifier and the BGY87 as a final amplifier.BGY85A
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY85A modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltage supply of +24 V (DC). BGY84A is intended for use as an input amplifier module and BGY85A as an output ampli...BGY85
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY85 modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of 24 V (DC). The BGY84 is intended for use as an input amplifier module and BGY85 as an outputampl...BGY84A
Mfg:PHILIPS Vendor:Other Category:Other
Hybrid amplifier BGY84A modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltage supply of +24 V (DC). BGY84A is intended for use as an input amplifier module and BGY85A as an output ampli...BGY847BO
Mfg:PHILIPS Pack:N/A D/C:N/A Vendor:Other Category:Other
Hybrid high dynamic range optical receiver BGY847BO module in a SOT115T package. Two of the module pins are for connection to 24 V (DC). One for amplifier supply voltage and the other for the pin diode bias. The module B...BGY84
Mfg:PHI D/C:04+ Vendor:Other Category:Other
Hybrid amplifier BGY84 modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of 24 V (DC). The BGY84 is intended for use as an input amplifier module and BGY85 as an outputampl...BGY835C
Vendor:Other Category:Other
The BGY835C is designed as one kind of high dynamic range optical receiver amplifier device that is available in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC c...BGY82
Mfg:TOSHIBA Pack:MODULE D/C:50 Vendor:Other Category:Other
Hybrid amplifier BGY82 module in a SOT115J package operating with a voltage supply of 24 V (DC).BGY81
Vendor:Other Category:Other
Hybrid amplifier BGY81 modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of (DC). The BGY80 is intended for use as a 12.5 dB pre-amplifier and the BGY81 as a 12.5 dB final...BGY80
Vendor:Other Category:Other
Hybrid amplifier BGY80 modules for CATV systems operating over a frequency range of 40 to 450 MHz at a voltagesupply of (DC). The BGY80 is intended for use as a 12.5 dB pre-amplifier and the BGY81 as a 12.5 dB final...BGY787
Mfg:module Pack:ASTEC D/C:05+ Vendor:Other Category:Other
Hybrid amplifier BGY787 module in a SOT115J package operating with a voltage supply of 24 V (DC).BGY785AD
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range cascode amplifier BGY785AD module with darlington pre-stage dies in a SOT115J package operating at a voltage supply of 24 V (DC).BGY785A
Mfg:PHILIPS Pack:MODULE D/C:N/A Vendor:Other Category:Other
Hybrid high dynamic range cascode amplifier BGY785A module in a SOT115J package operating with a voltage supply of24 V (DC).BGY687B
Mfg:PHILIPS Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY687B module designed for CATV systems operating over a frequency range of 40 to 600 MHz at a voltage supply of 24 V (DC).BGY687
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY687 module designed for CATV systems operating over a frequency range of40 to 600 MHz at a voltage supply of 24 V (DC).BGY685AL
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY685AL module designed for applications in CATV systems operating over a frequency range of 40 MHz to 600 MHz operating with a voltage supply of +24 V (DC).BGY685AD
Mfg:PHL Vendor:Other Category:Other
Hybrid high dynamic range cascode amplifier BGY685AD module with Darlington pre-stage dies operating at a voltage supply of +24 V in a SOT115J package.BGY685A
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Special super-high dynamic range amplifier BGY685A module designed for applications in CATV systems with a bandwidth of 40 to 600 MHz operating at a voltage supply of 24 V (DC).BGY685
Mfg:PHI Pack:org packing D/C:08+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY685 module designed for applications in CATV systems operating over a frequency range of 40 to 600 MHz operating with a voltage supply of 24 V (DC).BGY683
Mfg:PHI Pack:org packing D/C:08+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY683 module for CATV systems operating over a frequency range of 40 to 600 MHz at a voltage supply of +24 V (DC).BGY681
Mfg:PHILIPS Pack:N/A D/C:N/A Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY681 module designed for CATV systems operating over a frequency range of40 to 600 MHz operating with a voltage supply of 24 V (DC).BGY68
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY68 module in a SOT115J package operating at a voltage supply of 24 V (DC).BGY67BO4M
Vendor:Other Category:Other
Hybrid high dynamic range optical amplifier BGY67BO4M module in a SOT115U package operating at a voltage supply of 24 V (DC). The module BGY67BO4M contains a monomode optical input suitable for wavelengths from 1290 to 1...BGY67BO
Mfg:PHI Pack:org packing D/C:08+ Vendor:Other Category:Other
Hybrid high dynamic range optical amplifier BGY67BO module in a SOT115U package operating at a voltage supply of 24 V (DC). The module BGY67BO contains a monomode optical input suitable for wavelengths from 1290 to 1600 ...BGY67A
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY67A module in a SOT115J package operating at a voltage supply of 24 V (DC).BGY67
Mfg:TOSHIBA Pack:module D/C:100 Vendor:Other Category:Other
Hybrid amplifier BGY67 module for CATV systems operating over a frequency range of 5 to 200 MHz at a voltage supply of +24 V (DC). The device is intended as a reverse amplifier for use in two way systems.BGY66B
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
Hybrid high dynamic range amplifier BGY66B module designed for applications in CATV systems with a bandwidth of 5 to 120 MHz operating with a voltage supply of 24 V (DC).BGY65
Mfg:PHI Pack:1999 Vendor:Other Category:Other
Hybrid amplifier BGY65 module for CATV systems operating over a frequency range of 5 to 200 MHz at a voltage supply of +24 V (DC). The device is intended as a reverse amplifier for use in two way systems.BGY61
Mfg:PHI Pack:org packing D/C:08+ Vendor:Other Category:Other
Hybrid amplifier BGY61 module for CATV systems operating over a frequency range of 5 to 200 MHz at a voltage supply of +24 V (DC). The device is intended as a reverse amplifier for use in two way systems.BGY588N
Vendor:Other Category:Other
Hybrid amplifier BGY588N module in a SOT115J package operating with a voltage supply of 24 V (DC).BGY588
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY588 module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of +24 V (DC) and intended for use as a line-extender.BGY587B
Mfg:TOSHIBA Pack:MODULE D/C:30 Vendor:Other Category:Other
Hybrid amplifier BGY587B module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of +24 V (DC).BGY587
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY587 modules for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). The BGY586 is intended for use as a pre-amplifier and BGY587 as a final amplifier.BGY586
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier modules for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). The BGY586 is intended for use as a pre-amplifier and BGY587 as a final amplifier.BGY585A
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY585A module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). Intended for use as a final amplifier.BGY585
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY585 module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). Intended for use as a final amplifier.BGY583
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier BGY583 module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC).BGY580
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid amplifier module for CATV systems operating over a frequency range of 40 to 550 MHz at a voltage supply of 24 V (DC). The BGY580 is intended for use as a pre-amplifier.BGY5
Vendor:Other Category:Other
The BGY925/5 is a three-stage UHF amplifier module in a SOT365A package. The module consists of one NPN silicon planar transistor die and two silicon MOSFET dies mounted together with matching and bias circuitry on a met...BGY282
Mfg:PHI Pack:S0P D/C:03+ Vendor:Other Category:Other
The BGY282 is a power amplifier module in a SOT632A surface mounted ceramic package with a plastic cap. The module consists of two separated line-ups, one for GSM900 and one for GSM1800 with internal power control, inpu...BGY280
Mfg:PHI Pack:QFN Vendor:Other Category:Other
The BGY280 is a power amplifier module in a SOT559A leadless package with a plastic cap. The dimensions are 13.75 x 11 x 1.7 mm. The module consists of two separated line-ups. One for GSM900 and one for GSM1800. Inter...BGY241
Mfg:PHI D/C:09+ Vendor:Other Category:Other
The BGY241 is a three-stage UHF amplifier module in a SOT482C leadless package with a plastic cover. The module consists of one NPN silicon planar transistor die and one bipolar monolithic integrated circuit mounted toge...BGY212A
Vendor:Other Category:Other
The BGY212A is a three-stage UHF amplifier module in a SOT482C leadless package with a plastic cover. The module consists of one NPN silicon planar transistor die and one bipolar monolithic integrated circuit mounted ...BGY206
Mfg:Philips Vendor:Other Category:Other
The BGY206 is a three-stage UHF amplifier module in a SOT388B package. The module consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized ceramic su...BGY205
Vendor:Other Category:Other
The BGY205 is a four-stage UHF amplifier module in a SOT321B package. The module consists of four NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized ceramic subs...BGY204
Mfg:N/A D/C:N/A Vendor:Other Category:Other
The BGY204 is a four-stage UHF amplifier module in a SOT321B package. The module consists of four NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized ceramic subs...BGY2016
Mfg:PH Vendor:Other Category:Other
The BGY2016 is a three-stage UHF amplifier module in a SOT365A package with a plastic cap. It consists of threeNPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized...BGY1916
Mfg:PHI D/C:09+ Vendor:Other Category:Other
The BGY1916 is a three-stage UHF amplifier module in a SOT365A package with a plastic cap. It consists of threeNPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized...BGY1816S
Vendor:Other Category:Other
The BGY1816S is a three-stage UHF amplifier module in a SOT501A package with a plastic cap. It consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metalliz...BGY1816
Mfg:PHI D/C:09+ Vendor:Other Category:Other
The BGY1816 is a three-stage UHF amplifier module in a SOT365A package with a plastic cap. It consists of threeNPN silicon planar transistor dies mounted together with matching and bias circuit components on a metallized...BGY148B
Vendor:Other Category:Other
The BGY148A and BGY148B are three-stage UHF amplifier modules in a SOT421A package. Each module consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metalli...BGY148A
Vendor:Other Category:Other
The BGY148A and BGY148B are three-stage UHF amplifier modules in a SOT421A package. Each module consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metalli...BGY132
Vendor:Other Category:Other
The BGY132 and BGY133 are two stage amolifier modules.Each module compries two NPN silicon planar transistor chips together with lumped-element matching components. The BGY132 and BGY133 has 4 features.The first one is ...BGY122B
Mfg:Philips D/C:09+ Vendor:Other Category:Other
The BGY122A and BGY122B are three-stage UHF amplifier modules in a SOT388B package. Each module consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metalli...BGY122A
Vendor:Other Category:Other
The BGY122A and BGY122B are three-stage UHF amplifier modules in a SOT388B package. Each module consists of three NPN silicon planar transistor dies mounted together with matching and bias circuit components on a metalli...BGY120B
Vendor:Other Category:Other
The BGY120A and BGY120B are two-stage UHF amplifier modules in a SOT482B package with plastic cover. Eachmodule consists of two NPN silicon planar transistor dies mounted together with a matching and bias circuitcomponen...BGY120A
Vendor:Other Category:Other
The BGY120A and BGY120B are two-stage UHF amplifier modules in a SOT482B package with plastic cover. Eachmodule consists of two NPN silicon planar transistor dies mounted together with a matching and bias circuitcomponen...BGY1085A
Mfg:PHI D/C:09+ Vendor:Other Category:Other
Hybrid high amplifier BGY1085A module for CATV systems operating over a frequency range of 40 to 1000 MHz at a supply voltage of +24 V (DC).BGX885N
Mfg:PHILIPS Vendor:Other Category:Other
Hybrid amplifier BGX885N module for CATV/MATV systems operating over a frequency range of 40 to 860 MHz at a voltage supply of 24 V (DC).BGX881
Mfg:TOSHIBA Pack:MODULE D/C:10 Vendor:Other Category:Other
Hybrid amplifier BGX881 module for CATV/MATV systems operating over a frequency range of 40 to 860 MHz at a voltage supply of 24 V (DC).BGX50A
Pack:SOT-143 Vendor:Other Category:Other
BGX400
Mfg:INFINEON Pack:SOT-23 D/C:2008+ Vendor:Other Category:Other
BGW211EG
Vendor:Other Category:Other
The BGW211EG is one member of the BGW211 family which designed as the low-power WLAN SiP.It completes 802.11g functionality with the industry's lowest standby and operating power consumption and requires no external comp...BGU2003
Mfg:PHILIPS Pack:06+ D/C:SOT343R Vendor:Other Category:Other
Silicon MMIC amplifier BGU2003 consisting of an NPN double polysilicon transistor with integrated biasing for low voltage applications in a plastic, 4-pin SOT343R package.BGS67A
Mfg:PHILIPS D/C:O9+ Vendor:Other Category:Other
The BGS67A is a hybrid high dynamic range amplifier BGS67A module in a leadless SOT567A package, operating at a supply voltage of 12 V.BGS 2902
Vendor:Other Category:Other
Flashtubes BGS 2902 are light sources with high power density. Therefore they are only made of high-temperature materials. All flashtubes consist of a tube made of hard glass or quartz glass with electrodes (anode/cathod...BGR69
Vendor:Other Category:Other
The BGR69 is a high performance amplifier BGR69 operating at a voltage supply of 24 V in a SOT115J package.BGR269
Mfg:PHILIPS Pack:N/A D/C:N/A Vendor:Other Category:Other
High performance amplifier BGR269 operating at a voltage supply of 24 V DC in a SOT115J package.BGO847;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier BGO847; modules in a standard SOT115 package where the non-jacketed fibre has either no connector or an FC/APC or an SC/APC connector.The amplifier BGO847 supply voltage pin ...BGO847/SC0
Vendor:Other Category:Other
High dynamic range optical receiver amplifier BGO847/SC0 modules in a standard SOT115 package where the non-jacketed fibre has either no connector or an FC/APC or an SC/APC connector.The amplifier BGO847/SC0 supply volta...BGO847/FC0;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO847/FC0 in a standard SOT115 package where the non-jacketed fibre has either no connector or an FC/APC or an SC/APC connector.The amplifier BGO847/FC0; supply volt...BGO827;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO827; in a standard SOT115 package where the non-jacketed fibre has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO827; supply voltage pi...BGO827/SC0
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO827/SC0 in a standard SOT115 package where the non-jacketed fibre has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO827/SC0 supply volt...BGO827/FC0;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO827/FC0 in a standard SOT115 package where the non-jacketed fibre has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO827/FC0 supply vol...BGO827
Vendor:Other Category:Other
The BGO827 is designed as one kind of high dynamic range optical receiver amplifier device that is available in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC co...BGO807;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO807 in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO807 s...BGO807/SC0
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO807/SC0 in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO8...BGO807/FC0;
Vendor:Other Category:Other
High dynamic range optical receiver amplifier modules BGO807/FC0 in a standard SOT115 package where the non-jacketed fiber has either no connector or has an FC/APC or SC/APC connector.The amplifier BGO8...