Position: Home > Circuit Diagram > Index 78

Low Cost Custom Prototype PCB Manufacturer

Circuit Diagram

Index 78

Passive Implementation

Published:2013/7/11 2:32:00 Author:muriel | Keyword: Passive Implementation

Passive Implementation
(View)

View full Circuit Diagram | Comments | Reading(794)

High Frequency Equivalent Circuit Schematic

Published:2013/7/11 2:32:00 Author:muriel | Keyword: High Frequency Equivalent Circuit Schematic

High Frequency Equivalent Circuit Schematic
(View)

View full Circuit Diagram | Comments | Reading(889)

Low Frequency Equivalent Circuit Schematic

Published:2013/7/11 2:32:00 Author:muriel | Keyword: Low Frequency Equivalent Circuit Schematic

Low Frequency Equivalent Circuit Schematic
(View)

View full Circuit Diagram | Comments | Reading(886)

Circuit Schematic

Published:2013/7/11 2:31:00 Author:muriel | Keyword: Circuit Schematic

Circuit Schematic

The schematic (which is available in larger size jpeg, PostScript, PDF, or xfig, formats,) is a prototype circuit that implements the required frequency and crossfeed contouring. As a development objective, the low and high frequency contouring and crossfed control elements must not interact-they must be independently adjustable. (View)

View full Circuit Diagram | Comments | Reading(1421)

Power Supply 2

Published:2013/7/9 3:29:00 Author:muriel | Keyword: Power Supply

Power Supply 2
(View)

View full Circuit Diagram | Comments | Reading(610)

Alternative Relay Driver, and Component Pinouts

Published:2013/7/9 3:28:00 Author:muriel | Keyword: Alternative Relay Driver, Component Pinouts

Alternative Relay Driver, and Component Pinouts
(View)

View full Circuit Diagram | Comments | Reading(1084)

The Headphone Amp Circuit

Published:2013/7/9 3:28:00 Author:muriel | Keyword: The Headphone Amp Circuit

The Headphone Amp Circuit
(View)

View full Circuit Diagram | Comments | Reading(1642)

Hi-Fi Headphone Amplifier

Published:2013/7/9 3:28:00 Author:muriel | Keyword: Hi-Fi Headphone Amplifier

Hi-Fi Headphone Amplifier
Can be directly connected to CD players, tuners and tape recorders. * Tested with several headphone models of different impedance: 32, 100, 245, 300, 600 & 2000 Ohm. * Old 8 Ohm impedance headphones can be also driven, but these obsolete devices are not recommended. * Schematic shows left channel and power supply (common to both channels). * Numbers in parentheses show IC1 right channel pin connections. * A correct grounding is very important to eliminate hum and ground loops. Connect to the same point the ground sides of J1, P1, C2, C3 & C4. Then connect separately the input and output grounds to the power supply ground. (View)