© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:MIT Pack:P2 Vendor:Other Category:Other
M62281P/FP is designed as a high speed current mode PWM control IC.This M62281P/FP small10 pin package contains many functions and protection circuits allowing simpler peripheral circuit andcompact set design.This IC M62...
Vendor:Other Category:Other
M6227XGP is an integrated circuit designed as fixed output voltage general purpose DC-DC converter.Integrating peripheral components in ultrasmall 5-pin SOT23 package allows for simplified external circuit and compact lo...
Vendor:Other Category:Other
The M62262FP is a CMOS voltage converter for driving MMICs.M62262FP includes a input inverter utilizing a charge-pump technique, therefore it can provide both a just inverted output (-Vo) and a twice inverted output (-2V...
Mfg:MIT Pack:SOP Vendor:Other Category:Other
The M62261FP is a C-MOS semiconductor circuit for driving MMIC, by connecting to the external capacitance, it can generate 2-times of inverting input voltage.With resident charge-pump type 2-times inverting input voltage...
Mfg:MITSUBIS Pack:SOP16 D/C:01+ Vendor:Other Category:Other
The M62258FP is designed as general purpose battery charger control. The M62258FP has function which require for the batterycharge control on single chip. Not only the combination of M62258 and microcomputer capable of h...
Mfg:MIT Pack:SMD Vendor:Other Category:Other
M62256FP is a semiconductor integrated circuit designed to control the battery charger. This IC controls not only all the time sequence needed for battery charging,but also gives full support for detection of battery tem...
Mfg:11000 Pack:MIT Vendor:Other Category:Other
The M62255FP is intended to be used a general purpose battery charger control for Note PC. The M62255FP contains the functions which are required for the battery charge control ,on single chip using low peripheral compon...
Mfg:MIT D/C:01+ Vendor:Other Category:Other
The M62254FP is designed as standard battery charger controller. The M62254FP has functions which require for the battery charge control on single chip. Not only the combination of M62254 and MCU capable of handling batt...
Mfg:MIT D/C:03+ Vendor:Other Category:Other
The M62253FP is a charge controller designed for charging lithium ion batteries.The M62253FP IC has a current and voltage control circuit allowing the constant current/voltage charging to lithium ion batteries.A charger ...
Mfg:RENESAS/PB-FREE Pack:TSSOP Vendor:Other Category:Other
M62244FP is a semiconductor integrated circuit designed as Li-ion battery charge control IC.Built-in constant current and constant voltage circuit allows for charging Li-ion battery.
Vendor:Other Category:Other
The M62242FP has the following features including Built-in accurate reference voltage for full charge detection(4.2V±30mV accuracy,prepared for 4.1 V battery voltage);Built-in 5V power supply for MCU;Using with MCU vario...
Mfg:N/A Pack:N/A D/C:N/A Vendor:Other Category:Other
The M62241FP is designed as 1chip Integrated Circuit for controlling battery charger. This IC contains analog circuits needed for controlling charge, and timesequential-control logic circuits. This IC has various functio...
Mfg:MIT Vendor:Other Category:Other
The M62240FP is a general purpose battery charger control IC.It can control all of the sequence needed for battery charging, it also has functions such as detection of battery temperature, a protection against over-curre...
Vendor:Other Category:Other
M62237FP is constant voltage/current control IC with high accuracy ref. voltage (1.25 V ± 1.0%) suitable for secondary side control for charger and switching power supply.Built-in OP Amps for voltage/current control and ...
Vendor:Other Category:Other
The M62230FP is a semiconductor circuit for LCD matrix regulator,which will generate the diveded-voltage to drive LCD matrix.By changing the connection of R pin(i.e.,Change the internal resistor ratio), M62230FP can supp...
Vendor:Other Category:Other
M62222 is a general purpose DC-DC converter which provides a 2.7V fixed output voltage.
M62222 is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a small 5-...
Vendor:Other Category:Other
M62222 is a general purpose DC-DC converter which provides a 2.7V fixed output voltage.
M62222 is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a small 5-...
Vendor:Other Category:Other
The M62221 is a general purpose DC-DC converter which provides a 3.0V fixed output voltage.The M62221L is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a s...
Vendor:Other Category:Other
The M62221 is a general purpose DC-DC converter which provides a 3.0V fixed output voltage.The M62221FP is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a ...
Vendor:Other Category:Other
The M62220 is a general purpose DC-DC converter which provides a 3.3V fixed output voltage.The M62220 is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a sm...
Mfg:MIT D/C:00+ Vendor:Other Category:Other
The M62220 is a general purpose DC-DC converter which provides a 3.3V fixed output voltage.The M62220 is possible to simplify the peripheral circuit and to design compact and low cost sets because this IC, housed in a sm...
Vendor:Other Category:Other
The M62216FP is designed as low voltage operation STEP-UP DC-DC converter.This IC can operate very low input voltage (over 0.9V) and low power dissipation (circuit current is less than 850A).So, this IC suitable for powe...
Mfg:MIT Pack:SOP-8 Vendor:Other Category:Other
The M62216FP is designed as low voltage operation STEP-UP DC-DC converter.This IC can operate very low input voltage (over 0.9V) and low power dissipation (circuit current is less than 850A).So, this IC suitable for powe...
Mfg:Renesas Pack:N/A Vendor:Other Category:Other
M62213P/FP is designed as a general purpose high-speed PWM control IC.This small 10 pin package contains many function and protection circuits allowing simpler peripheral circuits andcompact set design.This M62213P/FP I...
Mfg:56 Pack:MIT Vendor:Other Category:Other
M62213P/FP is designed as a general purpose high-speed PWM control IC.This small 10 pin package contains many function and protection circuits allowing simpler peripheral circuits andcompact set design.This M62213P/FP IC...
Mfg:MITSUBISHI D/C:96 Vendor:Other Category:Other
M62212 is designed as a general purpose DC-DC converter.This small 8 pin package contains many functions allowing simpler peripheral circuits and compact set design.The output transistor is open collector and emitter fol...
Mfg:MIT Pack:SSOP D/C:0 Vendor:Other Category:Other
M62212 is designed as a general purpose DC-DC converter.This small 8 pin package contains many functions allowing simpler peripheral circuits and compact set design.The output transistor is open collector and emitter fol...
Pack:SOP D/C:98/P3 Vendor:Other Category:Other
M62212 is designed as a general purpose DC-DC converter.This small 8 pin package contains many functions allowing simpler peripheral circuits and compact set design.The output transistor is open collector and emitter fol...
Vendor:Other Category:Other
M62211FP is designed as a general purpose multi-function DC-DC converter. This small 10 pin package contains manyfunctions allowing simpler peripheral circuits and compact set design.The output circuit of M62211P is desi...
Mfg:MIT Pack:SOP-10 D/C:98+ Vendor:Other Category:Other
M62211FP is designed as a general purpose multi-function DC-DC converter. This small 10 pin package contains manyfunctions allowing simpler peripheral circuits and compact set design.The output circuit of M62211FP is des...
Vendor:Other Category:Other
M62210FP is designed as a general purpose multi-function DC-DC converter. This is most suitable as a back-light control for a LCD,etc.This small 10 pin package contains many functions allowing simpler peripheral circuits...
Mfg:Mitsubishi D/C:04+ Vendor:Other Category:Other
M62055FP is a 3V power supply featuring a watchdog timer function for a microcontroller system.It can be a power source of 3V ± 5% by utilizing the reference voltage and amplifier.M62055FP can also generate a reset pulse...
Vendor:Other Category:Other
M62050P/FP is a voltage threshold detector designed for detection of 3V supply voltage and generation of a system reset pulse. It is suitable for microcontroller systems.The IC, a supervisor of the MCU operations, dissip...
Vendor:Other Category:Other
M62050P/FP is a voltage threshold detector designed for detection of 3V supply voltage and generation of a system reset pulse. It is suitable for microcontroller systems.The IC, a supervisor of the MCU operations, dissip...
Mfg:MIT Pack:SOP D/C:98+ Vendor:Other Category:Other
The M62032FP is an IC for detection of two different input voltages to reset almost all logic circuits including MCU.The M62032FP contains a delay circuit with which any delay time can be obtained only by adding an exter...
Mfg:MIT Pack:SMD-8 Vendor:Other Category:Other
The M62032AFP is an IC for detection of two different input voltages to reset almost all logic circuits including MCU.It contains a delay circuit with which any delay time can be obtained only by adding an external capac...
Mfg:RENEASAS Pack:SOP8 D/C:00+ Vendor:Other Category:Other
The M62030FP is a voltage threshold detector designed for detection of an input voltage/supply voltage and generation of a system reset pulse for almost all logic circuits such as microcontroller.The M62030FP contains a ...
Vendor:Other Category:Other
The M62023L/P/FP is a system reset IC that controls the memory backup function of an SRAM and an embedded RAM of a microcontroller.The M62023L/P/FP IC outputs reset signals (RES/RES) to a microcontroller at power-down an...
Vendor:Other Category:Other
The M62023L/P/FP is a system reset IC that controls the memory backup function of an SRAM and an embedded RAM of a microcontroller.The M62023L/P/FP IC outputs reset signals (RES/RES) to a microcontroller at power-down an...
Pack:SOP/8 D/C:01+ Vendor:Other Category:Other
The M62023L/P/FP is a system reset IC that controls the memory backup function of an SRAM and an embedded RAM of a microcontroller.The M62023L/P/FP IC outputs reset signals (RES/RES) to a microcontroller at power-down an...
Vendor:Other Category:Other
The M62022 is a semiconductor integrated circuit resets logic circuits according to supply voltage.It is used with many types of circuits,including central processing units.With the built-in delay circuit,delay time can ...
Mfg:RENESAS D/C:2006 Vendor:Other Category:Other
The M62022 is a semiconductor integrated circuit resets logic circuits according to supply voltage.It is used with many types of circuits,including central processing units.With the built-in delay circuit,delay time can ...
Mfg:N/A Pack:DIP D/C:07+ Vendor:Other Category:Other
The M62021 is a system IC that controls the memory backup function of SRAM and microcomputer (internal RAM).The IC outputs reset signals(RES/RES) to a microcomputer at power-down and power failure.It also shifts the powe...
Mfg:MIT Pack:02+ D/C:ZIP Vendor:Other Category:Other
The M62021 is a system IC that controls the memory backup function of SRAM and microcomputer (internal RAM).The IC outputs reset signals(RES/RES) to a microcomputer at power-down and power failure.It also shifts the powe...
Vendor:Other Category:Other
The M62021 is a system IC that controls the memory backup function of SRAM and microcomputer (internal RAM).The IC outputs reset signals(RES/RES) to a microcomputer at power-down and power failure.It also shifts the powe...
Vendor:Other Category:Other
The M62015, M62016 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The...
Mfg:MITSUBIS Pack:SOP8 D/C:03+ Vendor:Other Category:Other
The M62015, M62016 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The...
Vendor:Other Category:Other
The M62015, M62016 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The...
Vendor:Other Category:Other
The M62015, M62016 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The...
Vendor:Other Category:Other
As applications for microcomputers are increasing,a desire has arisen for a RAM backup function.Let us introduce Mitsubishi Electric new low power dissipation,high-performance system reset IC,which is suitable for such R...
Vendor:Other Category:Other
As applications for microcomputers are increasing,a desire has arisen for a RAM backup function.Let us introduce Mitsubishi Electric new low power dissipation,high-performance system reset IC,which is suitable for such R...
Mfg:MICROCHIP D/C:94 Vendor:Other Category:Other
As applications for microcomputers are increasing,a desire has arisen for a RAM backup function.Let us introduce Mitsubishi Electric new low power dissipation,high-performance system reset IC,which is suitable for such R...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in thepower supply to a microcomputer system in order to reset or release the microcomputer system.The M62001...
Mfg:MITSUBISHI Pack:SOP8 D/C:96+ Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in thepower supply to a microcomputer system in order to reset or release the microcomputer system.The M62001...
Mfg:MITSUBISHI Pack:SIP Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The M6200...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The M6200...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The M6200...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The M6200...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in thepower supply to a microcomputer system in order to reset or release the microcomputer system.The M62001...
Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in thepower supply to a microcomputer system in order to reset or release the microcomputer system.The M62001...
Mfg:MITSUBISHI Pack:SIP D/C:05+ Vendor:Other Category:Other
The M62001~8 are semiconductor integrated circuits whose optimum use is for the detection of the rise and fall in the power supply to a microcomputer system in order to reset or release the microcomputer system.The M6200...
Vendor:Other Category:Other
Mfg:MIT Vendor:Other Category:Other
The M61880FP is a semiconductor laser-diode driver/controller. Its functions are the driving and laser power control of a specific type(Mitsubishi's N-type laser)of semiconductor laser diode,in which the anode of a semic...
Vendor:Other Category:Other
The M616Z08 is a 128 Kbit (131,072 bit) CMOS SRAM, organized by 16 bits. The device features fully static operation requiring no external clocks or timing strobes, with equal address access and cycle times. It requires ...
Vendor:Other Category:Other
Pack:07+ Vendor:Other Category:Other
M61541FP is an audio signal processor for home audio.This IC contains 6 channel electronic volume and 2 band tone control.
Mfg:RENESAS Pack:SOP-8 D/C:08+ Vendor:Other Category:Other
M61540FP is an audio signal processor for home audio. This IC contains 6 channel electronic volume, gain control, input selector and 2 band tone control.
Vendor:Other Category:Other
The M61539FP is 6ch electronic volume with tone control. M61539FP is easy to use more than M62446AFP.
Mfg:RENESAS Pack:SSOP24 D/C:06+ Vendor:Other Category:Other
The M61538FP is 6ch electronic volume. This IC is controlled by 2-wire serial bus and is suitable for Home Audio System.
Vendor:Other Category:Other
Vendor:Other Category:Other
Pack:SSOP42 D/C:N/A Vendor:Other Category:Other
The M61530FP is a four-channel volume IC which is optimal for combination with the M61519FP two-channelelectronic volume. A multi-channel system is easily configured with the aid of these two chips.
Mfg:MIT Vendor:Other Category:Other
M61529FP is the semiconductor integrated circuit for Home Audio. M61529FP includes 2ch electronic volume,Tone control, 4 Input Selector, Bass Boost, REC output and Mic Mixing. This IC is suitable for Mini Component. A di...
Vendor:Other Category:Other
Mfg:QFP Pack:RENESAS D/C:O4 Vendor:Other Category:Other
Pack:SSOP42 D/C:N/A Vendor:Other Category:Other
Mfg:RENESAS Pack:SOP D/C:2008+ Vendor:Other Category:Other
The M61523FP is a semiconductor integrated circuit using the SCF technology. This IC is no need external parts ofTone and Loudness block. External components for pop-noise were reduced by built-in the offset reduction ci...
Mfg:MITSUBISHI Pack:QFP80 Vendor:Other Category:Other
Mfg:RENESAS Pack:QFP D/C:0546+ Vendor:Other Category:Other
Mfg:54 Pack:MITSUBISHI Vendor:Other Category:Other
M61519FP is the semiconductor integrated circuit for Home Audio. M61519FP includes 2ch electronic volume, Tonecontrol, 4 Input Selector, Bass Boost, REC output and Mic Mixing. This IC is suitable for Mini Component.
Mfg:MIT Pack:SSOP36 D/C:0250+(9K)/0246+(4K)/0251+(5K) Vendor:Other Category:Other
The M61518FP is an audio signal processor suitable for the mini component system with the cassette tape.The circuit includes Selector for selecting input source, REC/Play back amp., Tone control and 2ch Electronic Volume...
Mfg:RENESAS Pack:QFP D/C:0618+ Vendor:Other Category:Other
Mfg:MITSUBISHI Pack:SOP24 D/C:0110+/0102+/0106+() Vendor:Other Category:Other
The M61515FP is the sound controller powered by "QSurround" system.The "QSurround" system decodes and virtualizes multi-speaker surround sound from various matrix surround encoded sources such as: Dolby Surround, stereo ...
Mfg:MITSUBISHI Pack:QFP80 Vendor:Other Category:Other
Mfg:MITSUMI Vendor:Other Category:Other
Mfg:MIT Pack:SSOP D/C:07+ Vendor:Other Category:Other
The M61510AFP is a digital sound controller IC which is ideal for home audio applications. M61510AFP includes five-input selector, input volume control, surround sound (effect switchable in three stages), tone control (3...
Mfg:MITSUBIS.. Pack:SOP D/C:09+ Vendor:Other Category:Other
The M61509FP is the sound controller powered by the "QXpander" system.The "QXpander" system produces normal and wide 3D sound expansion from any stereo input signal. (Note) This device is produced under license fro...
Mfg:1200 Vendor:Other Category:Other
Mfg:MITSUBIS.. Pack:SOP D/C:09+ Vendor:Other Category:Other
The M61506FP is a 5 band peak hold ICs that use microprocessor time division to produce serial output for spectrum analyzer displays.
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The M61504FP is an optimum digital sound controller IC for home audio.It has a 4ch input selector, input volume, surround (3 variation), tone control (3 band), loudness, Vocal cut and 2ch master volume.It can control all...
Mfg:MIT Pack:SOP-24 D/C:01+ Vendor:Other Category:Other
The M61503FP is a sound controller IC with the "BBE sound" sound technology.It can realize articulation of reconstruction sound by BBE surround built-in reproduce tone more naturally.(Note) This device is producted under...
Mfg:MITSUBIS.. Pack:SOP D/C:09+ Vendor:Other Category:Other
The M61500FP is the sound controller powerd by "QSurround" system.The "QSurround" system decodes and virtualize multi-speaker surround sound from various matrix surround encoded sources:Dolby Surround, stereo downmixed A...
Mfg:RENESAS Pack:DIP32 D/C:2002 Vendor:Other Category:Other
The M61323SP/FP is a semiconductor integrated circuit for the RGBHV interface. The device features switching signalsinput from two types of image sources and outputting the signals to the CRT display,etc. Synchronous sig...
Mfg:MIT Pack:SSOP-36 D/C:04+ Vendor:Other Category:Other
The M61323SP/FP is a semiconductor integrated circuit for the RGBHV interface. The device features switching signalsinput from two types of image sources and outputting the signals to the CRT display,etc. Synchronous sig...
Mfg:DIP Pack:MIT D/C:05+ Vendor:Other Category:Other
M61311SP/M61316SP is Semiconductor Integrated Circuit for CRT Display Monitor.It includes OSD Blanking, OSD Mixing, Retrace Blanking, Video Detector, Sync Separator, Wide Band Amplifier, Brightness Control.Main/Sub Contr...
Mfg:MITSUBIS D/C:DIP Vendor:Other Category:Other
M61314SP is Semiconductor Integrated Circuit for CRT Display Monitor. It includes OSD Blanking,OSD Mixing,Retrace Blanking,Video detector,Sync Sepa ,Wide band Amplifer.Brightness Control, Main/Sub Contrast,OSD level,4ch ...
Vendor:Other Category:Other
M61311SP/M61316SP is Semiconductor Integrated Circuit for CRT Display Monitor.M61311SP/M61316SP includes OSD Blanking, OSD Mixing, Retrace Blanking, Video Detector, Sync Separator, Wide Band Amplifier, Brightness Control...
Mfg:MIT Vendor:Other Category:Other
M61303FP is integrated Circuit f or LCD Display Monitor.It is controlled IIC BUS and Band Wide is 180MHz.M61303FP includes OSD Blanking ,OSD Mixing,Wide Band Amplif ier,Main/Sub Contrast Main/Sub Brightness ,and 2 Input ...
Vendor:Other Category:Other
M61301SP is Semiconductor Integrated Circuit for CRT Display Monitor.M61301SP includes OSD Blanking,OSD Mixing,Retrace Blanking,Wide Band Amplifre,Brightness Control.Main/Sub Contrast and OSD AdjustFunction can be contro...
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.