© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The SY10/SY100E160 are high-speed, 12-bit parity generator/checkers with differential outputs, for use in new, high-performance ECL systems. The output Q of SY100E160 takes on a logic HIGH value only when an odd number o...
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100E158 offer five 2:1 multiplexers with differential outputs, designed for use in new, highperformance ECL systems.The multiplexer operation of SY100E158 is controlled by the SEL (Select) signal which selects...
Vendor:Other Category:Other
The SY10/SY100E157 contain four 2:1 multiplexers with differential outputs. The output data are controlled by the individual Select (SEL) inputs. The individual select control makes the SY100E157 well suited for random l...
Vendor:Other Category:Other
The SY10/SY100E156 offer three 4:1 multiplexers followed by latches with differential outputs, designed for use in new, high-performance ECL systems. The two external latch enable signals (LEN1 and LEN2) are gated throug...
Vendor:Other Category:Other
The SY10/SY100E155 offer six 2:1 multiplexers followed by latches with single-ended outputs, designed for use in new, high-performance ECL systems. The two external latch-enable signals (LEN1 and LEN2) are gated through ...
Vendor:Other Category:Other
The SY10/SY100E154 offer five 2:1 multiplexers followed by latches with differential outputs, designed for use in new, high-performance ECL systems. The two external Latch-Enable signals (LEN1, LEN2) are gated through a ...
Vendor:Other Category:Other
The SY100E151JI is designed for use in new,high-performance ECL systems.It offer 6 edge-triggered,high-speed,master-slave D-type flip-flops with differential outputs.
Features of the SY100E151JI are:(1)1100MHz toggle fr...
Vendor:Other Category:Other
The SY10/SY100E151 offer 6 edge-triggered, high-speed, master-slave D-type flip-flops with differential outputs, designed for use in new, high-performance ECL systems. The two external clock signals (CLK1, CLK2) of SY100...
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100E150 are 6-bit D latches with differential outputs designed for use in new, high- performance ECL systems. When both Latch Enables (LEN1, LEN2) are at a logic LOW, the latch is in the transparent mode and i...
Vendor:Other Category:Other
The SY10/SY100E143 are high-speed 9-bit hold registers designed for use in new, high-performance ECL systems. The SY100E143 can hold current data or load new data. The nine inputs, D0-D8, accept parallel input data.The S...
Vendor:Other Category:Other
The SY10/SY100E142 are high-speed 9-bit shift registers designed for use in new, high-performance ECL systems. The SY100E142 can accept serial or parallel data to be shifted out in one direction as both serial and parall...
Vendor:Other Category:Other
The SY10/SY100E141 are 8-bit, full-function shift registers designed for use in new, high-performance ECL systems. The SY100E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eigh...
Vendor:Other Category:Other
The SY10/SY100E137 are very high speed binary ripple counters. The two least significant bits were designed with very fast edge rates, while the more significant bits maintain standard ECLinPS output edge rates. This all...
Vendor:Other Category:Other
The SY10/SY100E136 are 6-bit synchronous, presettable, cascadable universal counters. The SY100E136 generate a look-ahead-carry output and accept a look-ahead-carry input. These two features allow for the cascading of mu...
Vendor:Other Category:Other
The SY10/SY100E131 are high-speed quad master slave D-type flip-flops with differential outputs designed for use in new, high-performance ECL systems. The flip-flops of SY100E131 may be individually clocked by holding CC...
Vendor:Other Category:Other
The SY10/SY100E122 are 9-bit buffers designed for use in new, high-performance ECL systems. The E122 provides nine non-inverting buffers.
Vendor:Other Category:Other
The SY10/SY100E116 are quint differential line receivers designed for use in new, high-performance ECL systems. The SY100E116 has emitter-follower outputs and an internally generated reference supply (VBB) for singleende...
Vendor:Other Category:Other
The SY10/SY100E112 are quad drivers designed for use in new, high-performance ECL systems. The SY100E112 has two pairs of OR/NOR outputs from each gate and a common, buffered enable input. The data input can also be used...
Vendor:Other Category:Other
The SY10/100E111AE/SY100E111LE are low skew 1-to-9 differential drivers designed for clock distribution in mind. The SY10/ 100E111AE/SY100E111LE's function and performance are similar to the popular SY10/100E111/SY100E11...
Vendor:Other Category:Other
The SY10/SY100E111L/L are low skew 1-to-9 differential driver designed for clock distribution in mind. The SY10/SY100E111L/L's function and performance are similar to the popular SY10/100E111, with the improvement of low...
Vendor:Other Category:Other
The SY10/SY100E111AE/LE are low skew 1-to-9 differential drivers designed for clock distribution in mind. The SY10/ SY100E111AEE/LE's function and performance are similar to the popular SY10/100E111, with the improvement...
Vendor:Other Category:Other
The SY100E111A is low skew 1-to-9 differential driver designed for clock distribution in mind. The SY100E111A/L's function and performance are similar to the popular SY10/100E111, with the improvement of lower jitter and...
Mfg:SYNERGY Pack:PLCC D/C:OO Vendor:Other Category:Other
The SY100E111 is low skew 1-to-9 differential drivers designed for clock distribution in new, highperformance ECL systems. They accept one differential or single-ended input, with VBB used for single-ended operation. The...
Vendor:Other Category:Other
The SY100E107 offer five 2-input XOR/XNOR gates and are designed for use in new, high- performance ECL systems.The SY100E107 also features a function output, F, which is the OR of all five XOR gate outputs, while F is th...
Vendor:Other Category:Other
The SY100E104 is quint 2-input AND/NAND gates designed for use in new, high-performance ECL systems. The E104 also features a function output, F, which is the OR of all five AND gate outputs, while F is the NOR. Both tru...
Vendor:Other Category:Other
The SY100E101 is quad 4-input OR/NOR gates designed for use in new, high-performance ECL systems. The SY100E101 features both true and complementary outputs.
Vendor:Other Category:Other
The SY100E016 is high-speed synchronous, presettable and cascadable 8-bit binary counters designed for use in new, high-performance ECL systems. Architecture and operation are the same as the Motorola MC10H016 in the MEC...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The SY10/100ELT20V is a single TTL-to-differential PECL translator. Because PECL (Positive ECL) levels are used, either +5V or +3.3V and ground are required. The small outline 8-lead SOIC package and low skew single gate...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
General Description
The SY10/100EL34L are low skew ÷2, ÷4, ÷8 clock generation chips designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the c...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The SY10/100E457 are 3-bit differential 2:1 multiplexers. The fully differential data path makes the devices ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to ease A...
Vendor:Other Category:Other
The SY10/100E446 are integrated 4-bit parallel-to-serial data converters. These devices are designed to operate for NRZ data rates of up to a minimum of 1.3Gb/s. The chips generate a divide-by-4 and a divide-by-8 clock f...
Vendor:Other Category:Other
The SY10/100E445 are integrated 4-bit serial-to-parallel data converters. The devices are designed to operate for NRZ data rates of up to 2.5Gb/s. The chip generates a divide-by-4 and a divide-by-8 clock for both 4-bit c...
Vendor:Other Category:Other
The SY10/100E256 offer three 4:1 multiplexers followed by latches with differential outputs designed for use in new, high-performance ECL systems. Separate Select controls are provided for the leading 2:1 mux pairs (see ...
Vendor:Other Category:Other
The SY10/100E171 offer three 4:1 multiplexers with differential outputs, designed for use in new, high-performance ECL systems. The leading 4-bit multiplexer operation is organized pairwise, with each pair being a 2-bit ...
Vendor:Other Category:Other
The SY10/100E164 are 16:1 multiplexers with a differential output. The select inputs (SEL0,1,2,3) control which one of the sixteen data inputs (A0A15) is propagated to the output.
Special attention to the SY10/100E164 l...
Vendor:Other Category:Other
The SY10/100E163 offer two 8:1 multiplexers designed for use in new, high-performance ECL systems. The SY10/100E163 has differential outputs and common select inputs. The select inputs (SEL0, SEL1, SEL2) determine which...
Vendor:Other Category:Other
The SY10/100E158 offer five 2:1 multiplexers with differential outputs, designed for use in new, high- performance ECL systems.
The SY10/100E158 is controlled by the SEL (Select) signal which selects one of the two bits...
Vendor:Other Category:Other
The SY10/100E157 contain four 2:1 multiplexers with differential outputs. The output data are controlled by the individual Select (SEL) inputs. The individual select control makes SY10/100E157 well suited for random logi...
Vendor:Other Category:Other
Vendor:Other Category:Other
The SY10/100E154 offer five 2:1 multiplexers followed by latches with differential outputs, designed for use in new, high-performance ECL systems. The two external Latch-Enable signals (LEN1, LEN2) are gated through a lo...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The SY10/100E111 are low skew 1-to-9 differential drivers designed for clock distribution in new, high-performance ECL systems. They accept one differential or single-ended input, with VBB used for single-ended operation...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:ZETEX D/C:00+ Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:SIEMENS Pack:SOT-89 D/C:04+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The SXT6234 is a single-chip solution for multiplexing four tributaru channels into a single high speed data stream and for demultiplexing a high speed data stream back to four tributary channels.
Features of the SXT623...
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
Stanford Microdevices' SXT-289 amplifier is a high efficiency GaAs Heterojunction Bipolar Transistor (HBT) MMIC housed in low-cost surface-mountable plastic package. These HBT MMICs are fabricated using molecular beam ep...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
SXR Plug-In Aluminum Electrolytic Capacitor
Vendor:Other Category:Other
The SXN15 is a new high efficiency open frame isolated 15 Watt converter series in an industry standard footprint. The first four models in the series feature an input voltage range of 33 Vdc to 75 Vdc and are available ...
Vendor:Other Category:Other
The SXI50-03S is very compact switching power supplies for cost critical applications. They deliver 15 to 150 W of continuous power. Use of high quality components and good thermal dissipation make SXI50-03S a very relia...
Vendor:Other Category:Other
The SXI30-03S is very compact switching power supplies for cost critical applications. They deliver 15 to 150 W of continuous power. Use of high quality components and good thermal dissipation make them a very reliable p...
Vendor:Other Category:Other
The SXI15-03S is very compact switching power supplies for cost critical applications. They deliver 15 to 150 W of continuous power. Use of high quality components and good thermal dissipation make SXI15-03S a very relia...
Vendor:Other Category:Other
The SXI150-05S is very compact switching power supplies for cost critical applications. They deliver 15 to 150 W of continuous power. Use of high quality components and good thermal dissipation make SXI150-05S a very rel...
Vendor:Other Category:Other
The SXI100-05S is very compact switching power supplies for cost critical applications. They deliver 15 to 150 W of continuous power. Use of high quality components and good thermal dissipation make SXI100-05S a very rel...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
© 2008-2012 SeekIC.com Corp.All Rights Reserved.