About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
SY100S317,SY100S314,SY100E163,
SY100S317
Vendor:Other Category:Other
The SY100S317 is a set of ultra-fast, triple 2-wide OR/ AND gates designed for use in high-performance ECL systems. This device offers both true and complement outputs. The inputs on SY100S317 have 75KΩ pull-down r...SY100S314
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY100S314 offers five differential line receivers with emitter follower outputs, designed for use in highperformance ECL systems. For single-ended operation, the VBB reference voltage is available. In the single-ende...SY100S313
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY100S313 offers four drivers with two OR and two NOR outputs, designed for use in high-performance ECL systems. The four drivers are controlled by a common Enable signal which is buffered to minimize input loading. ...SY100S307
Vendor:Other Category:Other
The SY100S307 is an ultra-fast quint exclusive-OR/NOR gate designed for use in high-performance ECL systems. A function output that is the wire-OR result of the exclusive-OR outputs is also available. The inputs on the d...SY100S304
Vendor:Other Category:Other
The SY100S304 is an ultra-fast quint AND/NAND gate designed for use in high-performance ECL systems. This device also features a Function (F) output which is the wire- NOR of the AND gate outputs. The inputs on the devic...SY100S302
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY100S302 offers five 2-input OR/NOR gates designed for use in high-performance ECL systems. The five gates are controlled by a common Enable signal. All inputs have 75KΩ pull-down resistors and all outputs are...SY100S301
Vendor:Other Category:Other
The SY100S301 is an ultra-fast triple 5-input OR/NOR gate designed for use in high-performance ECL systems. The inputs on this device have 75KΩ pull-down resistors.SY100HA643
Vendor:Other Category:Other
The SY100HA643 is an enhanced dual supply, low skew translating 1:8 clock driver. Devices in the Micrel-Synergy H600 translators series utilize the 28-lead PLCC for optimal power pinning, signal flow through and electric...SY100H842L
Vendor:Other Category:Other
The SY10/SY100H842L are single supply, low skew translating 1:4 clock drivers.The SY100H842L feature a 24mA TTL output stage, with AC performance specified into a 20pF load capacitance. A HIGH on the enable pin (EN) forc...SY100H842
Vendor:Other Category:Other
The SY10/SY100H842 are single supply, low skew translating 1:4 clock drivers.The SY100H842 feature a 24mA TTL output stage, with AC performance specified into a 50pF load capacitance. A HIGH on the enable pin (EN) forces...SY100H841L
Vendor:Other Category:Other
The SY10/SY100H841L are single supply, low skew translating 1:4 clock drivers.The SY100H841L feature a 24mA TTL output stage, with AC performance specified into a 20pF load capacitance.A latch is provided on-chip. When L...SY100H841
Vendor:Other Category:Other
The SY10/SY100H841 are single supply, low skew translating 1:4 clock drivers.The SY100H841 feature a 24mA TTL output stage, with AC performance specified into a 50pF load capacitance.A latch is provided on-chip. When LEN...SY100H646L
Vendor:Other Category:Other
The SY10/SY100H646L are single supply, low skew translating 1:8 clock drivers. Devices in the Micrel- Synergy H600 translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical ...SY100H641L
Vendor:Other Category:Other
The SY10/SY100H641L are single supply, low skew translating 1:9 clock drivers. Devices in the Micrel- Synergy H600 translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical ...SY100H641
Vendor:Other Category:Other
The SY10/SY100H641 are single supply, low skew translating 1:9 clock drivers. Devices in the Micrel- Synergy H600 translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical p...SY100H606
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100H606 are 6-bit, registered, single supply TTL-to-PECL translators. The devices feature differential PECL outputs as well as a choice between either a differential PECL clock input or a TTL clock input. The ...SY100H603
Vendor:Other Category:Other
The SY10/SY100H603 are 9-bit, dual supply ECL-to-TTL translators. Devices in the Micrel-Synergy 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical performance.T...SY100H602
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100H602 are 9-bit, dual supply TTL-to-ECL translators with latches. Devices in the Micrel-Synergy 9-bit translator series utilize the 28-lead PLCC for optimal power pinning, signal flow-through and electrical ...SY100H600
Vendor:Other Category:Other
The SY10/SY100H600 are 9-bit, dual supply TTL-to-ECL translators. Devices in the Micrel-Synergy 9-bit translator series utilize the 28-lead PLCC for optimal power pinning,signal flow-through and electrical performance....SY100EPT28L
Vendor:Other Category:Other
The SY10/SY100EPT28L is a differential LVPECL-to- LVTTL translator and a LVTTL-to-differential LVPECL translator in a single package. Because LVPECL (Positive ECL) levels are used, only +3.3V and ground are required. The...SY100EPT23L
Vendor:Other Category:Other
The SY100EPT23L is a dual differential LVPECL-to- LVTTL translator. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The tiny 8-pin MSOP and dual-gate design of the EPT23L ma...SY100EPT22V
Vendor:Other Category:Other
The SY100EPT22V is a dual TTL/CMOS to differential PECL translator. Capable of running from a 3.3 or 5V supply, the part can be used in either LVTTL/LVCMOS/ LVPECL or TTL/CMOS/PECL systems. The SY100EPT22V only requires ...SY100EPT21L
Vendor:Other Category:Other
The SY100EPT21L is a single differential LVPECL-to- LVTTL translator using a single +3.3V power supply. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8-...SY100EPT20V
Vendor:Other Category:Other
The SY10/SY100EPT20V is a TTL/CMOS to differential PECL translator. Capable of running from a 3.3 or 5V supply, the part can be used in either LVTTL/LVCMOS/ LVPECL or TTL/CMOS/PECL systems.The SY100EPT20V only requires a...SY100EP58V
Vendor:Other Category:Other
The SY10/SY100EP58V are 3.3V/5V, precision, high-speed, 2:1 multiplexers. Both devices are pin-for-pin, plug-in replacements for the MC10/100EP58D/DT in 8-pin SOIC and 6-pin TSSOP (MSOP) packages. The signal-path inputs ...SY100EP57V
Vendor:Other Category:Other
The SY100EP57V is a high-speed, low-skew, fully differential PECL/ECL 4:1 multiplexer in a 20-pin TSSOP package. This device is a pin-for-pin, plug-in replacement to the MC10/100EP57DT. The signal-path inputs (D0:D3) acc...SY100EP195VTITR
Vendor:Other Category:Other
The SY100EP195VTITR is one of the SY100EP195V series.SY100EP195VTITR is a programmable delay line,verying the time a logic signal takes to traverse from IN to Q.This delay can vary from about 2.2ns to about 12.2ns.The in...SY100EP195V
Vendor:Other Category:Other
SY100EP195V is a programmable delay line, varying the delay of a PECL or NECL input signal by any amount between about 2.2ns and 12.2ns. A 10-bit digital control register affords delay steps of approximately 10ps.SY100EP...SY100EP16VS
Vendor:Other Category:Other
SY100EP16V
Vendor:Other Category:Other
SY100EP14U
Vendor:Other Category:Other
The SY100EP14U is a high-speed, 2GHz differential PECL/ECL 1:5 fanout buffer optimized for ultra-low skew applications. Within device skew is guaranteed to be less than 25ps over temperature and supply voltage. The wide ...SY100EP111U
Vendor:Other Category:Other
The SY100EP111U is a high-speed, low skew 1-to-10 differential fanout buffer designed for clock distribution in new, high-performance systems. The internal 2:1 mux allows the input to select between two differential cloc...SY100ELT982
Vendor:Other Category:Other
The SY100ELT982 is a high speed PECL-to-CML translator. The output current is DC current controlled by IRSET, current through the resistor RSET. The output OUT is LOW when output enable is HIGH.The SY100ELT982 incorporat...SY100ELT28
Vendor:Other Category:Other
The SY10/SY100ELT28 is a differential PECL-to-TTL translator and a TTL-to-differential PECL translator in a single package. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline...SY100ELT25
Vendor:Other Category:Other
The SY100ELT25 is a differential ECL-to-TTL translator. Because ECL levels are used, a +5V, 5.2V (or 4.5V) and ground are required. The small outline 8- lead SOIC package and the single gate of the ELT25 makes SY100ELT25...SY100ELT24
Vendor:Other Category:Other
The SY100ELT24 is a TTL-to-differential ECL translator. Because ECL levels are used, a +5V, 5.2V (or 4.5V) and ground are required. The small outline 8-lead SOIC package and the single gate of the ELT24 makes SY100ELT24 ...SY100ELT23L
Vendor:Other Category:Other
The SY10/SY100ELT23L are dual differential LVPECLto- LVTTL translators with +3.3V power supply. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8- lead SOI...SY100ELT23
Mfg:- Pack:SOP D/C:00+ Vendor:Other Category:Other
The SY10/SY100ELT23 are dual differential PECL-to-TTL translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline 8-lead SOIC package and the low skew dual gate design of...SY100ELT22L
Vendor:Other Category:Other
The SY10/SY100ELT22L are dual TTL-to-differential PECL translators with +3.3V power supply. Because PECL (Positive ECL) levels are used, only +3.3V and ground are required. The small outline 8-lead SOIC package and the l...SY100ELT22
Vendor:Other Category:Other
The SY10/SY100ELT22 are dual TTL-to-differential PECL translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline 8-lead SOIC package and the low skew, dual gate design o...SY100ELT21L
Vendor:Other Category:Other
The SY10/SY100ELT21L are single differential LVPECLto- LVTTL translators using a single +3.3V power supply. Because LVPECL (Low Voltage Positive ECL) levels are used, only +3.3V and ground are required. The small outline...SY100ELT21
Vendor:Other Category:Other
The SY10/SY100ELT21 are single differential PECL-to- TTL translators. Because PECL (Positive ECL) levels are used, only +5V and ground are required. The small outline 8-lead SOIC package and low skew single gate design m...SY100ELT20V
Vendor:Other Category:Other
The SY10/SY100ELT20V is a single TTL-to-differential PECL translators. Because PECL (Positive ECL) levels are used, either +5V or +3.3V and ground are required. The small outline 8-lead SOIC package and low skew single g...SY100EL92
Vendor:Other Category:Other
The SY100EL92 is a triple LVPECL-to-PECL or PECLto- LVPECL translator. The device receives standard PECL signals and translates them to differential LVPECL output signals (or vice versa). SY100EL92 can also be used as a ...SY100EL91L
Vendor:Other Category:Other
The SY100EL91L is a triple LVPECL-to-ECL or LVPECL-to-LVECL translator.A VBB output of SY100EL91L is provided for interfacing with single ended PECL signals at the input. If a single ended input is to be used, the VBB ou...SY100EL91
Vendor:Other Category:Other
The SY100EL91 is a triple PECL-to-ECL translator. It receives standard voltage PECL signals and translates them to different ECL output signals.A VBB output of SY100EL91 is provided for interfacing with single ended PECL...SY100EL90V
Vendor:Other Category:Other
The SY100EL90V is a triple ECL/LVECL-to-PECL/ LVPECL translator. The device can translate over all combinations of supply voltages: -5V ECL to 5V PECL, -5V ECL to 3.3V LVPECL, -3.3V LVECL to 5V PECL or -3.3V LVECL to 3.3...SY100EL58
Vendor:Other Category:Other
The SY10/SY100EL58 are 2:1 multiplexers. These devices are functionally equivalent to the E158 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster than ...SY100EL57L
Vendor:Other Category:Other
The SY100EL57L is a full differential 4:1 multiplexer. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input selecting b...SY100EL57
Vendor:Other Category:Other
The SY10/SY100EL57 are fully differential 4:1 multiplexers. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the device can also be used as a differential 2:1 multiplexer with SEL0 input select...SY100EL56V
Vendor:Other Category:Other
The SY100EL56V is a dual, fully differential 2:1 multiplexer. The differential data path makes the device ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to ease AC c...SY100EL52
Vendor:Other Category:Other
The SY10/SY100EL52 are differential data, differential clock D flip-flops. These devices are functionally equivalent to the E452 devices, with higher performance capabilities. With propagation delays and output transitio...SY100EL51
Vendor:Other Category:Other
The SY10/SY100EL51 are differential clock D flip-flops with reset. The SY100EL51 functionally similar to the E151 devices, with higher performance capabilities. With propagation delays and output transition times signifi...SY100EL38/L
Vendor:Other Category:Other
The SY10/SY100EL38/Lare low skew ÷2, ÷4/6 clock generation chips designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges are...SY100EL35
Vendor:Other Category:Other
The SY10/SY100EL35 are high-speed JK Flip-Flops. The J/K data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave and, thus, the outputs, upon a positive transition of the clo...SY100EL34/L
Vendor:Other Category:Other
The SY10/SY100EL34/L are low skew ÷2, ÷4, ÷8 clock generation chips designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges ...SY100EL33/L
Vendor:Other Category:Other
The SY10/100EL33/L are integrated ÷4 dividers. The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the device. If used, the VBB output should be bypassed to ground with...SY100EL32V
Vendor:Other Category:Other
The SY10/SY100EL32V are integrated ÷2 dividers. The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the SY100EL32V. If used, the VBB output should be bypassed to ground...SY100EL31
Vendor:Other Category:Other
The SY10/SY100EL31 are D flip-flops with set and reset. The devices are functionally equivalent to the E131 devices, with higher performance capabilities. With propagation delays and output transition times significantly...SY100EL29V
Vendor:Other Category:Other
The SY100EL29V is a dual differential register with differential data (inputs and outputs) and clock. The registers are triggered by a positive transition of the positive clock (CLK) input. A HIGH on the Reset (Rx) async...SY100EL17V
Vendor:Other Category:Other
The SY100EL17V is a quad differential receiver. The device is functionally equivalent to the E116 device with the capability of operation from either a ECL supply voltage (3.3V or 5V) or PECL supply voltage (+3.3V or +5V...SY100EL16VS
Vendor:Other Category:Other
The SY100EL16VS are differential receivers with variable output swing. The devices are functionally equivalent to the EL16V devices with an input that control the amplitude of the outputs.The operational range of the SY1...SY100EL16VA-VF
Vendor:Other Category:Other
The SY10/SY100EL16VA-VF are differential receivers. The devices are equivalent to SY10/100EL16 or SY10/ 100EL16V with enhanced capabilities. The QHG, /QHG outputs have a DC gain several times larger than the DC gain of t...SY100EL16V
Vendor:Other Category:Other
The SY10/SY100EL16V are differential receivers. The devices are functionally equivalent to the E116 devices, with higher performance capabilities. With output transition times significantly faster than the E116, the EL16...SY100EL15L
Vendor:Other Category:Other
The SY100EL15L is a low skew 1:4 clock distribution IC designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power supplie...SY100EL15
Vendor:Other Category:Other
The SY10/SY100EL15 are low skew 1:4 clock distribution chips designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power s...SY100EL14V
Vendor:Other Category:Other
The SY100EL14V is a low skew 1:5 clock distribution chip designed explicitly for low skew clock distribution applications. The device can be driven by either a differential or single-ended ECL or, if positive power suppl...SY100EL12
Vendor:Other Category:Other
The SY10/100EL12 are low-impedance drive buffers. With two pairs of OR/NOR outputs, the devices are ideally suited for high drive applications such as memory addressing. These devices are functionally equivalent to the E...SY100EL11V
Mfg:SYNERGY Pack:SOP D/C:98+ Vendor:Other Category:Other
The SY10/SY100EL11V are 1:2 differential fanout gates. These devices are functionally similar to the E111A/L devices, with higher performance capabilities. Having within-device skews and output transition times significa...SY100EL1003
Vendor:Other Category:Other
The SY100EL1003 is a high speed current source for driving a semiconductor laser diode in optical transmission applications. The output current modulation is DC voltage controlled. The modulation current is disabled whe...SY100EL1001
Vendor:Other Category:Other
The SY100EL1001 is a high speed current source for driving a semiconductor laser diode in optical transmission applications. The output current modulation is DC voltage controlled. The integrated circuit contains the fo...SY100EL07
Vendor:Other Category:Other
The SY10/SY100EL07 are 2-input XOR/XNOR gates. These devices are functionally equivalent to the E107 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster...SY100EL05
Vendor:Other Category:Other
The SY10/SY100EL05 are 2-input differential AND/NAND gates. These devices are functionally equivalent to the E404 devices, with higher performance capabilities. With propagation delays and output transition times signifi...SY100EL04
Vendor:Other Category:Other
The SY10/SY100EL04 are 2-input AND/NAND gates. These devices are functionally equivalent to the E104 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster...SY100EL01
Vendor:Other Category:Other
The SY10/SY100EL01 are 4-input OR/NOR gates. These devices are functionally equivalent to the E101 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster t...SY100E457
Vendor:Other Category:Other
The SY10/SY100E457 are 3-bit differential 2:1 multiplexers. The fully differential data path makes the devices ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to ease...SY100E452
Vendor:Other Category:Other
The SY10/SY100E452 are 5-bit differential registers with differential data (inputs and outputs) and clock. The registers are triggered by a positive transition of the positive clock (CLK) input. A high on the Master Rese...SY100E451
Vendor:Other Category:Other
The SY10/SY100E451offer six D-type flip-flops with singleended outputs and differential data and clock inputs, designed for use in new, high-performance ECL systems. The registers are triggered by the rising edge of the ...SY100E446
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100E446 are integrated 4-bit parallel-toserial data converters. The SY100E446 is designed to operate for NRZ data rates of up to a minimum of 1.3Gb/ s. The chips generate a divide-by-4 and a divide-by-8 clock ...SY100E445
Vendor:Other Category:Other
The SY10/SY100E445 are integrated 4-bit serial-to-parallel data converters. The devices are designed to operate for NRZ data rates of up to 2.5Gb/s. The SY100E445 generates a divide-by-4 and a divide-by-8 clock for both ...SY100E431
Vendor:Other Category:Other
The SY10/SY100E431 are 3-bit flip-flops with differential clock, data input and data output.The asynchronous Set and Reset controls are edgetriggered rather than level controlled. This allows the user to rapidly set or r...SY100E417
Vendor:Other Category:Other
The SY100E417 is a quint LVPECL-to-PECL translator. It can also be used as a quint PECL-to-LVPECL translator. The device receives standard PECL signals and translates them to differential LVPECL output signals (or vice v...SY100E416
Vendor:Other Category:Other
The SY10/SY100E416 are 5-bit differential line receiving devices. The 2.0GHz of bandwidth provided by the high frequency outputs make the devices ideal for buffering of very high speed oscillators.A VBB pin of SY100E416 ...SY100E404
Vendor:Other Category:Other
The SY10/SY100E404 are 4-bit differential AND/NAND devices. The differential operation of these devices make them ideal for pulse shaping applications where duty cycle skew is critical. Special design techniques were inc...SY100E337
Vendor:Other Category:Other
The SY10/SY100E337 are 3-bit registered bus transceivers with scan designed for use in new, high- performance ECL systems. The bus outputs (BUS0BUS2) are designed to drive a 25 bus; the receive outputs (Q0Q2) are designe...SY100E336
Vendor:Other Category:Other
The SY10/SY100E336 offer three bus transceivers with both transmit and receive registers and are designed for use in new, high-performance ECL systems. The bus outputs (BUS0-BUS2) are designed to drive a 25 bus. The rece...SY100E310L
Vendor:Other Category:Other
The SY100E310L is a 3.3V, precision 2:8 ECL/PECL fanout buffer optimized for precision low-skew clock distribution. The SY100E310L features fully differential clock paths to minimize both device and system skew resulting...SY100E256
Vendor:Other Category:Other
The SY10/SY100E256 offer three 4:1 multiplexers followed by latches with differential outputs designed for use in new, high-performance ECL systems. Separate Select controls are provided for the leading 2:1 mux pairs (se...SY100E241
Vendor:Other Category:Other
The SY10/SY100E241 are 8-bit shiftable registers designed for use in new, high-performance ECL systems. Unlike the E141, the SY100E241 features internal data feedback organized such that the SHIFT control overrides the H...SY100E222L
Vendor:Other Category:Other
The SY100E222L is a low-skew, low-jitter device capable of receiving a high-speed LVECL/LVPECL input in either a single-ended or differential configuration. For single-ended configurations, a VBB output reference is supp...SY100E212
Vendor:Other Category:Other
The SY10/SY100E212 are scannable registered ECL drivers typically used as fan-out memory address drivers for ECL cache driving. In a VLSI array-based CPU design, use of the E212 allows the user to conserve array output c...SY100E196
Vendor:Other Category:Other
The SY10/SY100E196 are programmable delay chips (PDCs) designed primarily for very accurate differential ECL input edge placement applications.The SY100E196 consists of a chain of gates and a linear ramp delay adjustment...SY100E195
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100E195 are programmable delay chips (PDCs) designed primarily for clock de-skewing and timing adjustment. They provide variable delay of a differential ECL input transition.The SY100E195 consists of a chain o...SY100E193
Vendor:Other Category:Other
The SY10/SY100E193 are error detection and correction (EDAC) circuits designed for use in new, high- performance ECL systems. The SY100E193 generates hamming parity codes on an 8-bit word as shown in the block diagram. T...SY100E175
Vendor:Other Category:Other
The SY10/SY100E175 are 9-bit latches. They also feature a tenth latched output (ODDPAR) which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH).The SY100E175 can...SY100E171
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10/SY100E171 offer three 4:1 multiplexers with differential outputs, designed for use in new, highperformance ECL systems. The leading 4-bit multiplexer operation is organized pairwise, with each pair being a 2-bit...SY100E167
Vendor:Other Category:Other
The SY10/SY100E167 offer six 2:1 multiplexers followed by D flip-flops with single-ended outputs, designed for use in new, high-performance ECL systems. The Select (SEL) control allows one of the two data inputs to the m...SY100E166
Vendor:Other Category:Other
The SY10/SY100E166 are 9-bit magnitude comparators designed for use in new, high-performance ECL systems. The SY100E166 compares the binary value of two 9-bit words and indicates whether one word is greater than or equal...SY100E164
Vendor:Other Category:Other
The SY10/SY100E164 are 16:1 multiplexers with a differential output. The select inputs (SEL0,1,2,3) control which one of the sixteen data inputs (A0A15) is propagated to the output.Special attention to the design layout ...SY100E163
Vendor:Other Category:Other