About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
SY10EL58,SY10EL57,SY100S318,
SY10EL58
Mfg:SYNERGY D/C:1995 Vendor:Other Category:Other
The SY10EL58/100EL58 are 2:1 multiplexers. These devices are functionally equivalent to the E158 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster tha...SY10EL57
Vendor:Other Category:Other
The SY10EL57/100EL57 are fully differential 4:1 multiplexers. By leaving the SEL1 line open (pulled LOW via the input pulldown resistors) the SY10EL57 can also be used as a differential 2:1 multiplexer with SEL0 input se...SY10EL52
Vendor:Other Category:Other
The SY10EL52/100EL52 are differential data, differential clock D flip-flops. These devices are functionally equivalent to the E452 devices, with higher performance capabilities. With propagation delays and output transit...SY10EL51
Vendor:Other Category:Other
The SY10EL51/100EL51 are differential clock D flip-flops with reset. The SY10EL51 is functionally similar to the E151 devices, with higher performance capabilities. With propagation delays and output transition times sig...SY10EL38/L
Vendor:Other Category:Other
The SY10EL38/L/100EL38/L are low skew ÷2, ÷4/6 clock generation chips designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edge...SY10EL35
Vendor:Other Category:Other
The SY10EL35/100EL35 are high-speed JK Flip-Flops. The J/K data enters the master portion of the flip-flop when the clock is LOW and is transferred to the slave and, thus, the outputs, upon a positive transition of the c...SY10EL34/L
Vendor:Other Category:Other
The SY10EL34/L/100EL34/L are low skew ÷2, ÷4, ÷8 clock generation chips designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output ed...SY10EL33/L
Vendor:Other Category:Other
The SY10EL33/L/100EL33/L are integrated ÷4 dividers. The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the device. If used, the VBB output should be bypassed to groun...SY10EL32V
Mfg:SYNERGY Pack:2000 Vendor:Other Category:Other
The SY10EL32V/100EL32V are integrated ÷2 dividers. The differential clock inputs and the VBB allow a differential, single-ended or AC-coupled interface to the SY10EL32V. If used, the VBB output should be bypassed to grou...SY10EL31
Vendor:Other Category:Other
The SY10EL31/100EL31 are D flip-flops with set and reset. The devices are functionally equivalent to the SY10EL31, with higher performance capabilities. With propagation delays and output transition times significantly f...SY10EL16VA-VF
Vendor:Other Category:Other
The SY10EL16VA-VF/100EL16VA-VF are differential receivers. The devices are equivalent to SY10EL16VA-VF/100EL16 or SY10/ 100EL16V with enhanced capabilities. The QHG, /QHG outputs have a DC gain several times larger than ...SY10EL16V
Vendor:Other Category:Other
The SY10EL16V/100EL16V are differential receivers. The devices are functionally equivalent to the SY10EL16V devices, with higher performance capabilities. With output transition times significantly faster than the E116, ...SY10EL15
Vendor:Other Category:Other
The SY10EL15/100EL15 are low skew 1:4 clock distribution chips designed explicitly for low skew clock distribution applications. The SY10EL15 can be driven by either a differential or single-ended ECL or, if positive pow...SY10EL12
Vendor:Other Category:Other
The SY10EL12/100EL12 are low-impedance drive buffers. With two pairs of OR/NOR outputs, the devices are ideally suited for high drive applications such as memory addressing. These devices are functionally equivalent to t...SY10EL11V
Mfg:SYNERGY Pack:2000 Vendor:Other Category:Other
The SY10EL11V/100EL11V are 1:2 differential fanout gates. The SY10EL11V is functionally similar to the E111A/L devices, with higher performance capabilities. Having within-device skews and output transition times signif...SY10EL1189
Vendor:Other Category:Other
The SY10EL1189 is a differential receiver, differential transmitter specifically designed to drive coaxial cables. It incorporates the output cable driver capability of the SY10EL89 Coaxial Cable Driver with additional c...SY10EL07
Mfg:SYNERGY D/C:94+ Vendor:Other Category:Other
The SY10EL07/100EL07 are 2-input XOR/XNOR gates. These devices are functionally equivalent to the E107 devices, with higher performance capabilities. With propagation delays and output transition times significantly fast...SY10EL05
Vendor:Other Category:Other
The SY10EL05/100EL05 are 2-input differential AND/NAND gates. These devices are functionally equivalent to the E404 devices, with higher performance capabilities. With propagation delays and output transition times signi...SY10EL04
Vendor:Other Category:Other
The SY10EL04/100EL04 are 2-input AND/NAND gates. These devices are functionally equivalent to the E104 devices, with higher performance capabilities. With propagation delays and output transition times significantly fast...SY10EL01
Vendor:Other Category:Other
The SY10EL01/100EL01 are 4-input OR/NOR gates. The SY10EL01 is functionally equivalent to the E101 devices, with higher performance capabilities. With propagation delays and output transition times significantly faster t...SY10E457
Vendor:Other Category:Other
The SY10E457/100E457 are 3-bit differential 2:1 multiplexers. The fully differential data path makes the SY10E457 ideal for multiplexing low skew clock or other skew sensitive signals. Multiple VBB pins are provided to e...SY10E452
Vendor:Other Category:Other
The SY10E452/100E452 are 5-bit differential registers with differential data (inputs and outputs) and clock. The registers are triggered by a positive transition of the positive clock (CLK) input. A high on the Master Re...SY10E451
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E451/100E451 offer six D-type flip-flops with singleended outputs and differential data and clock inputs, designed for use in new, high-performance ECL systems. The registers are triggered by the rising edge of t...SY10E446
Vendor:Other Category:Other
The SY10E446/100E446 are integrated 4-bit parallel-toserial data converters. These devices are designed to operate for NRZ data rates of up to a minimum of 1.3Gb/ s. The chips generate a divide-by-4 and a divide-by-8 clo...SY10E445
Vendor:Other Category:Other
The SY10E445/100E445 are integrated 4-bit serial-to-parallel data converters. The SY10E445 is designed to operate for NRZ data rates of up to 2.5Gb/s. The chip generates a divide-by-4 and a divide-by-8 clock for both 4-b...SY10E431
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E431/100E431 are 3-bit flip-flops with differential clock, data input and data output.The asynchronous Set and Reset controls of SY10E431 are edgetriggered rather than level controlled. This allows the user to ra...SY10E416
Vendor:Other Category:Other
The SY10E416/100E416 are 5-bit differential line receiving devices. The 2.0GHz of bandwidth provided by the high frequency outputs make the devices ideal for buffering of very high speed oscillators.A VBB pin of SY10E416...SY10E404
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E404/100E404 are 4-bit differential AND/NAND devices. The differential operation of these devices make SY10E404 ideal for pulse shaping applications where duty cycle skew is critical. Special design techniques we...SY10E337
Vendor:Other Category:Other
The SY10E337/100E337 are 3-bit registered bus transceivers with scan designed for use in new, high- performance ECL systems. The bus outputs (BUS0BUS2) are designed to drive a 25 bus; the receive outputs (Q0Q2) are desig...SY10E336
Vendor:Other Category:Other
The SY10E336/100E336 offer three bus transceivers with both transmit and receive registers and are designed for use in new, high-performance ECL systems. The bus outputs (BUS0-BUS2) are designed to drive a 25 bus. The re...SY10E256
Vendor:Other Category:Other
The SY10E256/100E256 offer three 4:1 multiplexers followed by latches with differential outputs designed for use in new, high-performance ECL systems. Separate Select controls are provided for the leading 2:1 mux pairs (...SY10E241
Vendor:Other Category:Other
The SY10E241/100E241 are 8-bit shiftable registers designed for use in new, high-performance ECL systems. Unlike the E141, the SY10E241 features internal data feedback organized such that the SHIFT control overrides the ...SY10E212
Vendor:Other Category:Other
The SY10E212/100E212 are scannable registered ECL drivers typically used as fan-out memory address drivers for ECL cache driving. In a VLSI array-based CPU design, use of the SY10E212 allows the user to conserve array ou...SY10E196
Vendor:Other Category:Other
The SY10E196/100E196 are programmable delay chips (PDCs) designed primarily for very accurate differential ECL input edge placement applications.The delay section of SY10E196 consists of a chain of gates and a linear ram...SY10E195
Vendor:Other Category:Other
The SY10E195/100E195 are programmable delay chips (PDCs) designed primarily for clock de-skewing and timing adjustment. They provide variable delay of a differential ECL input transition.The delay section consists of a c...SY10E193
Vendor:Other Category:Other
The SY10E193/100E193 are error detection and correction (EDAC) circuits designed for use in new, high- performance ECL systems. The SY10E193 generates hamming parity codes on an 8-bit word as shown in the block diagram. ...SY10E175
Vendor:Other Category:Other
The SY10E175/100E175 are 9-bit latches. They also feature a tenth latched output (ODDPAR) which is formed as the odd parity of the nine data inputs (ODDPAR is HIGH if an odd number of the inputs are HIGH).The SY10E175 ca...SY10E171
Vendor:Other Category:Other
The SY10E171/100E171 offer three 4:1 multiplexers with differential outputs, designed for use in new, highperformance ECL systems. The leading 4-bit multiplexer operation is organized pairwise, with each pair being a 2-b...SY10E167
Vendor:Other Category:Other
The SY10E167/100E167 offer six 2:1 multiplexers followed by D flip-flops with single-ended outputs, designed for use in new, high-performance ECL systems. The Select (SEL) control allows one of the two data inputs to the...SY10E166
Vendor:Other Category:Other
The SY10E166/100E166 are 9-bit magnitude comparators designed for use in new, high-performance ECL systems. The SY10E166 compares the binary value of two 9-bit words and indicates whether one word is greater than or equa...SY10E164
Vendor:Other Category:Other
The SY10E164/100E164 are 16:1 multiplexers with a differential output. The select inputs (SEL0,1,2,3) control which one of the sixteen data inputs (A0A15) is propagated to the output.Special attention to the design layou...SY10E163
Vendor:Other Category:Other
SY10E160
Vendor:Other Category:Other
The SY10E160/100E160 are high-speed, 12-bit parity generator/checkers with differential outputs, for use in new, high-performance ECL systems. The output Q takes on a logic HIGH value only when an odd number of inputs ar...SY10E158
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E158/100E158 offer five 2:1 multiplexers with differential outputs, designed for use in new, highperformance ECL systems.The multiplexer operation of SY10E158 is controlled by the SEL (Select) signal which select...SY10E157
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E157/100E157 contain four 2:1 multiplexers with differential outputs. The output data of SY10E157 are controlled by the individual Select (SEL) inputs. The individual select control makes the devices well suited ...SY10E156
Vendor:Other Category:Other
The SY10E156/100E156 offer three 4:1 multiplexers followed by latches with differential outputs, designed for use in new, high-performance ECL systems. The two external latch enable signals (LEN1 and LEN2) are gated thro...SY10E155
Vendor:Other Category:Other
The SY10E155/100E155 offer six 2:1 multiplexers followed by latches with single-ended outputs, designed for use in new, high-performance ECL systems. The two external latch-enable signals (LEN1 and LEN2) are gated throug...SY10E154
Vendor:Other Category:Other
The SY10E154/100E154 offer five 2:1 multiplexers followed by latches with differential outputs, designed for use in new, high-performance ECL systems. The two external Latch-Enable signals (LEN1, LEN2) are gated through ...SY10E151
Vendor:Other Category:Other
The SY10E151/100E151 offer 6 edge-triggered, high-speed, master-slave D-type flip-flops with differential outputs, designed for use in new, high-performance ECL systems. The two external clock signals (CLK1, CLK2) are ga...SY10E150
Vendor:Other Category:Other
The SY10E150/100E150 are 6-bit D latches with differential outputs designed for use in new, high- performance ECL systems. When both Latch Enables (LEN1, LEN2) are at a logic LOW, the latch is in the transparent mode and...SY10E143
Vendor:Other Category:Other
The SY10E143/100E143 are high-speed 9-bit hold registers designed for use in new, high-performance ECL systems. The SY10E143 can hold current data or load new data. The nine inputs, D0-D8, accept parallel input data.The ...SY10E142
Vendor:Other Category:Other
The SY10E142/100E142 are high-speed 9-bit shift registers designed for use in new, high-performance ECL systems. The SY10E142 can accept serial or parallel data to be shifted out in one direction as both serial and paral...SY10E141
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E141/100E141 are 8-bit, full-function shift registers designed for use in new, high-performance ECL systems. The SY10E141 performs serial/parallel in and serial/parallel out, shifting in either direction. The eig...SY10E137
Vendor:Other Category:Other
The SY10E137/100E137 are very high speed binary ripple counters. The two least significant bits were designed with very fast edge rates, while the more significant bits maintain standard ECLinPS output edge rates. This a...SY10E136
Vendor:Other Category:Other
The SY10E136/100E136 are 6-bit synchronous, presettable, cascadable universal counters. The SY10E136 generate a look-ahead-carry output and accept a look-ahead-carry input. These two features allow for the cascading of m...SY10E131
Vendor:Other Category:Other
The SY10E131/100E131 are high-speed quad master slave D-type flip-flops with differential outputs designed for use in new, high-performance ECL systems. The flip-flops of SY10E131 may be individually clocked by holding C...SY10E122
Vendor:Other Category:Other
The SY10E122/100E122 are 9-bit buffers designed for use in new, high-performance ECL systems. The SY10E122 provides nine non-inverting buffers.SY10E116
Vendor:Other Category:Other
The SY10E116/100E116 are quint differential line receivers designed for use in new, high-performance ECL systems. These devices have emitter-follower outputs and an internally generated reference supply (VBB) for singlee...SY10E112
Vendor:Other Category:Other
The SY10E112/100E112 are quad drivers designed for use in new, high-performance ECL systems. The E112 has two pairs of OR/NOR outputs from each gate and a common, buffered enable input. The data input can also be used as...SY10E111LE
Vendor:Other Category:Other
The SY10E111LE/100E111AE/LE are low skew 1-to-9 differential drivers designed for clock distribution in mind. The SY10E111LE/ 100E111AE/LE's function and performance are similar to the popular SY10E111LE/100E111, with th...SY10E111L
Vendor:Other Category:Other
The SY10E111L/100E111A/L are low skew 1-to-9 differential driver designed for clock distribution in mind. The SY10E111L/100E111A/L's function and performance are similar to the popular SY10E111L/100E111, with the improve...SY10E111AE
Vendor:Other Category:Other
The SY10E111AE/100E111AE/LE are low skew 1-to-9 differential drivers designed for clock distribution in mind. The SY10E111AE/ 100E111AE/LE's function and performance are similar to the popular SY10E111AE/100E111, with th...SY10E111A
Vendor:Other Category:Other
The SY10E111A/100E111A/L are low skew 1-to-9 differential driver designed for clock distribution in mind. The SY10E111A/100E111A/L's function and performance are similar to the popular SY10E111A/100E111, with the improve...SY10E111
Vendor:Other Category:Other
The SY10E111/100E111 are low skew 1-to-9 differential drivers designed for clock distribution in new, highperformance ECL systems. They accept one differential or single-ended input, with VBB used for single-ended operat...SY10E107
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY10E107/100E107 offer five 2-input XOR/XNOR gates and are designed for use in new, high- performance ECL systems.The SY10E107 also features a function output, F, which is the OR of all five XOR gate outputs, while F...SY10E104
Vendor:Other Category:Other
The SY10E104/100E104 are quint 2-input AND/NAND gates designed for use in new, high-performance ECL systems. The E104 also features a function output, F, which is the OR of all five AND gate outputs, while F is the NOR. ...SY10E101
Vendor:Other Category:Other
The SY10E101/100E101 are quad 4-input OR/NOR gates designed for use in new, high-performance ECL systems. The SY10E101 features both true and complementary outputs.SY10E016
Vendor:Other Category:Other
The SY10E016/100E016 are high-speed synchronous, presettable and cascadable 8-bit binary counters designed for use in new, high-performance ECL systems. Architecture and operation are the same as the Motorola MC10H016 in...SY100S891
Vendor:Other Category:Other
The SY100S891 is a 5-bit registered transceiver containing five bus transceivers with both transmit and receive registers. The bus outputs (BUS0 BUS4) are specified for driving a 25 ohm bus and the receive outputs (Q0 ...SY100S863
Vendor:Other Category:Other
The SY100S863 is a PECL 8:1 multiplexer designed for use in new, high-performance PECL systems.The SY100S863 has differential PECL outputs and a standard TTL output. The TTL select inputs (SEL0, SEL1, SEL2) determine whi...SY100S839V
Vendor:Other Category:Other
The SY100S839V is a low skew ÷2/4, ÷4/5/6 clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common output edges are ...SY100S838LZC
Vendor:Micrel Inc Category:Integrated Circuits (ICs)
IC CLOCK GEN 3.3V/5V 20-SOICThe SY100S838LZC is a low skew (÷1, ÷2/3) or (÷2, ÷4/ 6) clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common o...SY100S838L
Vendor:Other Category:Other
The SY100S838L is a low skew (÷1, ÷2/3) or (÷2, ÷4/ 6) clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common out...SY100S838/L
Vendor:Other Category:Other
SY100S838
Vendor:Other Category:Other
The SY100S838/L is a low skew (÷1, ÷2/3) or (÷2, ÷4/ 6) clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common ou...SY100S834LZC
Vendor:Micrel Inc Category:Integrated Circuits (ICs)
IC CLOCK GEN 3.3V/5V 16-SOICThe SY100S834LZC is designed explicitly for low skew clock generation applications. The features of SY100S834LZC can be summarized as (1)3.3V and 5V power supply options; (2)50ps output-to-output skew; (3)Synchronous ena...SY100S834L
Vendor:Other Category:Other
The SY100S834L is low skew (÷1, ÷2, ÷4) or (÷2,÷4,÷8) clock generation chip designed explicitly for low skew clock generation applications. The internal dividers of SY100S834L are synchronous to each other, therefore...SY100S834/L
Vendor:Other Category:Other
SY100S834
Mfg:SY Pack:SOP D/C:07/08+ Vendor:Other Category:Other
The SY100S834/L is low skew (÷1, ÷2, ÷4) or (÷2,÷4,÷8) clock generation chip designed explicitly for low skew clock generation applications. The internal dividers are synchronous to each other, therefore, the common ...SY100S815
Vendor:Other Category:Other
The SY100S815 is a low skew 1-to-4 PECL differential driver designed for clock distribution in new, highperformance PECL systems. SY100S815 accepts either a PECL clock input or a TTL input by using the TTL enable pin TEN...SY100S811
Vendor:Other Category:Other
The SY100S811 is a low skew 1-to-9 PECL differential driver designed for clock distribution in new, highperformance PECL systems. SY100S811 accepts either a PECL clock input or a TTL input by using the TTL enable pin TEN...SY100S391
Vendor:Other Category:Other
The SY100S391 is a hex TTL-to-PECL translator for converting TTL logic levels to 100K logic levels. The unique feature of this translator is the ability to do this translation using only one +5V supply. The differential ...SY100S371
Vendor:Other Category:Other
The SY100S371 is an ultra-fast triple 4-input multiplexer with true and complementary outputs designed for use in high-performance ECL systems. The multiplexer is controlled by common select inputs S0 and S1. A logic HIG...SY100S370
Vendor:Other Category:Other
The SY100S370 is a universal demultiplexer/decoder that can be used as either a dual 1-of-4 decoder or as a single 1-of-8 decoder and is designed for use in highperformance ECL systems. The Mode control (M) input determi...SY100S366
Vendor:Other Category:Other
The SY100S366 is an ultra-fast 9-bit magnitudecomparator designed for use in high-performance ECLsystems. The SY100S366 compares the arithmetic value of two9-bit words and indicates whether one word is greater thanor equ...SY100S364
Vendor:Other Category:Other
The SY100S364 is a 16-input multiplexer designed for use in high-performance ECL systems. The four Data Select inputs (S0, S1, S2, S3) determine the bit from the 16 inputs (In) that will be passed on to the output as sho...SY100S363
Vendor:Other Category:Other
The SY100S363 is a dual 8-input multiplexer designed for use in new, high-performance ECL systems. The three Data Select inputs (S0, S1, S2) determine the bits from each of the inputs (An, Bn) that will be passed on thro...SY100S360
Vendor:Other Category:Other
The SY100S360 is a dual parity checker/generator and is designed for use in high-performance ECL systems. The inputs are segmented into two groups of nine inputs each and the parity output is at a logic LOW when an even ...SY100S355
Vendor:Other Category:Other
The SY100S355 offers four transparent latches with differential outputs and is designed for use in highperformance ECL systems. The Select inputs (S0, S1) select one of the two sources of input data (D0 or D1) to the lat...SY100S351
Vendor:Other Category:Other
The SY100S351 offers six D-type, edge-triggered, master/slave flip-flops with differential outputs, and is designed for use in high-performance ECL systems. The flip-flops of SY100S351 are controlled by the signal from t...SY100S350
Vendor:Other Category:Other
The SY100S350 offers six high-speed D-Latches with both true and complement outputs, and is performance compatible for use with high-performance ECL systems. When both enable signals (Ea and Eb) are at a logic LOW, the l...SY100S341
Vendor:Other Category:Other
The SY100S341 offer eight D-type, edge-triggered flipflops with both individual inputs for parallel operation as well as serial inputs for bidirectional shifting, and are designed for use in high-performance ECL systems....SY100S336A
Vendor:Other Category:Other
The SY100S336A is functionally the same as the SY100S336, but has Sn to TC speed and Sn set-up and hold times significantly improved, allowing for higher clock frequency when used as a cascaded multi-stage counter. down...SY100S336
Vendor:Other Category:Other
The SY100S336 functions either as a modulo-16 up/ down counter or as a 4-bit bidirectional shift register and is designed for use in high-performance ECL systems. Three Select inputs (Sn) are provided for determining the...SY100S331
Mfg:SYSTECH Pack:PLCC28 D/C:07/08+ Vendor:Other Category:Other
The SY100S331 offers three D-type, edge-triggered master/slave flip-flops with true and complement outputs, designed for use in high-performance ECL systems. Each flip-flop is controlled by a common clock (CPc), as well ...SY100S325
Vendor:Other Category:Other
The SY100S325 are hex translators for converting 100K ECL logic levels to TTL logic levels. Inputs can be used as inverting, non-inverting or differential receivers. An internal reference voltage generator provides VBB f...SY100S324
Vendor:Other Category:Other
The SY100S324 is a hex translator designed to convert TTL logic levels to 100K ECL levels. The inputs are TTL compatible with differential outputs that can either be used as an inverting/non-inverting translator or as di...SY100S322
Vendor:Other Category:Other
The SY100S322 is an ultra-fast buffer designed for use in high-performance ECL systems. The device provides nine non-inverting buffers with single-ended outputs. The inputs on the device have 75KΩ pull-down resisto...SY100S321
Vendor:Other Category:Other
The SY100S321 is a monolithic 9-bit inverter. The device contains nine inverting buffer gates with single input and output.SY100S318
Vendor:Other Category:Other
The SY100S318 is an ultra-fast 5-wide 5, 4, 4, 4, 2 OR/AND gate with both true and complementary outputs, designed for use in high-performance ECL systems. The inputs on this device have 75KΩ pull-down resistors.