About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
SP5511,SP5510,SP385E-1,
SP5511
Mfg:GPS Pack:DIP Vendor:Other Category:Other
SP5510
Mfg:GPS Pack:DIP Vendor:Other Category:Other
SP5502
Vendor:Other Category:Other
SP54HC298
Vendor:Other Category:Other
The SP54HC298 is seires register.All devices contain diodes to protect inputs against damage due to high static voltages or electric fields; however, it is advised that precautions be taken not to exceed the maximum reco...SP541-X
Vendor:Other Category:Other
The SP541-X is a single-pole, single-throw, normally open multipurpose DC solid-state relay. SP541-X is designed to replace electromechanical relays in critical applications that require fast switching and solid state re...SP541
Mfg:IOR Pack:SIL4 D/C:07+ Vendor:Other Category:Other
The SP541 is a single-pole, single-throw, normally open multipurpose DC solid-state relay. SP541 is designed to replace electromechanical relays in critical applications that require fast switching and solid state reliab...SP540-X
Vendor:Other Category:Other
The SP540-X is a single-pole, single-throw, normally open multipurpose DC solid-state relay. It is designed to replace electromechanical relays in critical applications that require fast switching and solid state reliabi...SP540
Mfg:IOR Pack:SIL4 D/C:07+ Vendor:Other Category:Other
The SP540 is a single-pole, single-throw, normally open multipurpose DC solid-state relay. SP540 is designed to replace electromechanical relays in critical applications that require fast switching and solid state reliab...SP5301
Vendor:Other Category:Other
The SP5301 is a half-duplex Universal Serial Bus (USB) differential transceiver that interfaces with the USB Serial Interface Engine (SIE). The SP5301 is designed to allow 3.3V or 5.0V standard and programmable logic to ...SP526CF
Vendor:Other Category:Other
The SP526CF is designed as a monolithic device that supports three physical layer serial interface standards. It is fabricated using a low power BiCMOS process technology, and incorporates four drivers and four receivers...SP526
Vendor:Other Category:Other
The SP526 is a monolithic device that supports three (3) physical layer serial interface standards. The SP526 is fabricated using a low power BiCMOS process technology, and incorporates four (4) drivers and four (4) rece...SP524
Vendor:Other Category:Other
The SP522/524 is a monolithic device that supports three serial interface standards for Wide Area Network Connectivity. The SP522/524 is ideally suited for multi-protocol designs that are cost and space sensitive. The SP...SP522
Vendor:Other Category:Other
The SP522/524 is a monolithic device that supports three serial interface standards for Wide Area Network Connectivity. The SP522/524 is ideally suited for multi-protocol designs that are cost and space sensitive. The SP...SP516
Vendor:Other Category:Other
The SP516 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The seven (7) drivers and seven (7) receivers can transmit and receive signals over 20Mbps. The SP5...SP514
Vendor:Other Category:Other
The SP514 is a single chip devices that supports eight (8) physical serial interface standards for Wide Area Network connectivity. The product is fabricated using a low power BiCMOS process technology, and incorporates a...SP509
Vendor:Other Category:Other
The SP509 is a monolithic device that supports eight (8) popular serial interface standards for Wide Area Network (WAN) connectivity. The SP509 is fabricated using a low power BiCMOS process technology, and incorporate...SP508CF
Vendor:Other Category:Other
The SP508CF is one member of the SP508 series.The SP508 Evaluation Board is designed to analyze the SP508 multi-protocol transceivers.The evaluation board provides access points to all of the driver and receiver I/O pins...SP508
Vendor:Other Category:Other
The SP508 is a monolithic device that supports eight (8) popular serial interface standards for Wide Area Network (WAN) connectivity. The SP508 is fabricated using a low power BiCMOS process technology, and incorporates ...SP5070
Mfg:SIPEX Pack:DIP Vendor:Other Category:Other
SP507
Vendor:Other Category:Other
The SP507 is a monolithic IC that supports seven (7) popular serial interface standards for DTE/DCE connectivity. The seven (7) drivers and seven (7) receivers transmit and receive signals at over 20Mbps. The SP507 req...SP506
Vendor:Other Category:Other
Description Description The SP506 is a monolithic IC that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP506 is pin-to-pin compatible to our SP505 multi-protocol transceiver bu...SP505B
Vendor:Other Category:Other
The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and incorporates a Sipex pat...SP505AN
Vendor:Other Category:Other
The SP505AN is one member of the SP505 series.The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS proc...SP505A
Vendor:Other Category:Other
Description Description The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and ...SP5055
Mfg:GPS Pack:DIP+18 Vendor:Other Category:Other
SP5054
Mfg:MITEL Pack:SMD D/C:00+ Vendor:Other Category:Other
SP505
Vendor:Other Category:Other
The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity. The SP505 is fabricated using a low power BiCMOS process technology, and incorporates a Sipex paten...SP504
Vendor:Other Category:Other
The SP504 is a single chip device that supports eight (8) physical serial interface standards for Wide Area Network Connectivity. The SP504 is fabricated using a low power BiCMOS process technology, and incorporates a ...SP503
Vendor:Other Category:Other
The SP503 is a highly integrated serial transceiver that allows software control of its interface modes. It offers hardware interface modes for RS-232 (V.28), RS-422A (V.11), RS-449, RS-485, V.35, and EIA-530. The SP503 ...SP5026
Mfg:GPS Pack:DIP+18 Vendor:Other Category:Other
The SP5026 is a programming variant of the SP5510, allowing the design of one tuner with either 12C bus or 3-wire bus format depending on which device is inserted. The SP5026, when used with a TV varicap tuner, forms a c...SP5024DP
Mfg:GPS Pack:DIP Vendor:Other Category:Other
The SP5024 is a programming variant of the SP5510 allowing the design of one tuner with either I2C bus or 3-wire bus format depending on which device is inserted. The SP5024, when used with a TV varicap tuner, forms a co...SP5024
Mfg:GPS Pack:DIP Vendor:Other Category:Other
The SP5024 is a programming variant of the SP5510 allowing the design of one tuner with either I2C bus or 3-wire bus format depending on which device is inserted. The SP5024, when used with a TV varicap tuner, forms a co...SP502
Vendor:Other Category:Other
The SP502 is a highly integrated serial transceiver that allows software control of its interface modes. It offers hardware interface modes for RS-232 (V.28), RS-422A (V.11), RS-449, RS-485, V.35, and EIA-530. The SP502 ...SP501P
Vendor:Other Category:Other
The SP501P is one kind of liquid crystal displays(standard products),SP501P has some features such as:(1)pin type LCDs are available for easy mounting;(2)high reliability;(3)high contrast and wide viewing angle;(4)variet...SP4T
Vendor:Other Category:Other
SP4982
Vendor:Other Category:Other
The SP4982 prescaler is one a range of very high speed low power prescalers for use in consumer applications such as satellite TV receivers. The device features a CMOS compatible output stage. The SP4982 has 7 features....SP495
Mfg:SIPEX Pack:SMD D/C:07/08+ Vendor:Other Category:Other
The SP495 is a quad differential line driver/receiver meeting both RS-485 and RS-422 standards at data rates beyond 10Mbps. The SP495 features three half-duplex transceivers suitable for data bus connections and a fourth...SP491E
Vendor:Other Category:Other
The SP490E is a low power differential line driver/receiver meeting RS-485 and RS-422 standards up to 10Mbps. The SP491E is identical to the SP490E with the addition of driver and receiver tri-state enable lines. Both pr...SP4916
Mfg:SIPEX Pack:DIP Vendor:Other Category:Other
The SP4916 prescaler is one a range of very high speed low power prescalers for use in consumer applications such as satellite TV receivers. The device features a complementary output stage.SP491
Vendor:Other Category:Other
The SP490 is a low power differential line driver/receiver meeting RS-485 and RS-422 standards up to 5Mbps. The SP491 is identical to the SP490 with the addition of driver and receiver tri-state enable lines. Both produc...SP490E
Vendor:Other Category:Other
The SP490E is a low power differential line driver/receiver meeting RS-485 and RS-422 standards up to 10Mbps. The SP491E is identical to the SP490E with the addition of driver and receiver tri-state enable lines. Both pr...SP490
Vendor:Other Category:Other
The SP490 is a low power differential line driver/receiver meeting RS-485 and RS-422 standards up to 5Mbps. The SP491 is identical to the SP490 with the addition of driver and receiver tri-state enable lines. Both produc...SP489E
Vendor:Other Category:Other
The SP488E and SP489E are low-power quad differential line receivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices ...SP489A
Vendor:Other Category:Other
The SP488A and SP489A are high speed quad differential line receivers capable of meeting the RS-485 and RS-422 protocols while running at five times the normal transmission rates. The SP488A and SP489A are enhanced versi...SP489
Mfg:SMD Pack:SIPEX D/C:04+ Vendor:Other Category:Other
The SP488 and SP489 are lowpower quad differential line receivers meeting RS-485 and RS-422 standards. The SP488 features a common receiver enable control; the SP489 provides independent receiver enable controls for each...SP488E
Vendor:Other Category:Other
The SP488E and SP489E are low-power quad differential line receivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices ...SP488ACT
Vendor:Other Category:Other
The SP488ACT is one member of the SP488 family which is designed as the high speed quad differential line receiver that is enhanced version of Sipex's SP488 and SP489 quad RS-485/RS-422 line receivers. This device featur...SP488A
Vendor:Other Category:Other
The SP488A and SP489A are high speed quad differential line receivers capable of meeting the RS-485 and RS-422 protocols while running at five times the normal transmission rates. The SP488A and SP489A are enhanced versi...SP488
Vendor:Other Category:Other
The SP488 and SP489 are lowpower quad differential line receivers meeting RS-485 and RS-422 standards. The SP488 features a common receiver enable control; the SP489 provides independent receiver enable controls for each...SP487E
Vendor:Other Category:Other
The SP486E and SP487E are low-power quad differential line drivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices to...SP487
Vendor:Other Category:Other
The SP486 and SP487 are lowpower quad differential line drivers meeting RS-485 and RS-422 standards. The SP486 features a common driver enable control; the SP487 provides independent driver enable controls for each pair ...SP486E
Vendor:Other Category:Other
The SP486E and SP487E are low-power quad differential line drivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices to...SP486
Vendor:Other Category:Other
The SP486 and SP487 are lowpower quad differential line drivers meeting RS-485 and RS-422 standards. The SP486 features a common driver enable control; the SP487 provides independent driver enable controls for each pair ...SP485RCN
Vendor:Other Category:Other
The SP485RCN is one member of the SP485R series and designed as one kind of 1/10th unit load RS-485 transceiver with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver inpu...SP485R
Vendor:Other Category:Other
The SP481R and SP485R are pin-to-pin equivalent with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input impedance. The higher receiver input impedance allows for conn...SP485EP
Vendor:Other Category:Other
The SP485EP is one member of the SP485 series and designed as one kind of 1/10th unit load RS-485 transceiver with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input ...SP485EEN
Vendor:Other Category:Other
The SP485EEN is one member of the SP485 series and designed as one kind of 1/10th unit load RS-485 transceiver with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input...SP485ECN
Vendor:Other Category:Other
The SP485ECN is one member of the SP485 series and designed as one kind of 1/10th unit load RS-485 transceiver with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input...SP485E
Vendor:Other Category:Other
The SP481E and the SP485E are a family of half-duplex transceivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices to...SP485CP
Vendor:Other Category:Other
The SP485CP is one member of the SP485 series and designed as one kind of 1/10th unit load RS-485 transceiver with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input ...SP485
Vendor:Other Category:Other
The SP481, SP483, and the SP485 are a family of half-duplex transceivers that meet the requirements of RS-485 and RS-422. Their BiCMOS design allows low power operation without sacrificing performance. The SP481 and SP48...SP483E
Mfg:SIPEX Pack:SOP Vendor:Other Category:Other
The SP483E is a half-duplex transceiver that meets the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on this device to over ±15kV for both Human B...SP483
Mfg:SIPEX Pack:SOP8 Vendor:Other Category:Other
The SP481, SP483, and the SP485 are a family of half-duplex transceivers that meet the requirements of RS-485 and RS-422. Their BiCMOS design allows low power operation without sacrificing performance. The SP481 and SP48...SP481R
Vendor:Other Category:Other
The SP481R and SP485R are pin-to-pin equivalent with our existing SP485 product and contain enhancements such as higher ESD tolerance and high receiver input impedance. The higher receiver input impedance allows for conn...SP481E
Vendor:Other Category:Other
The SP481E and the SP485E are a family of half-duplex transceivers that meet the specifications of RS-485 and RS-422 serial protocols with enhanced ESD performance. The ESD tolerance has been improved on these devices to...SP481
Mfg:Sipex Pack:SOP8 D/C:N/A Vendor:Other Category:Other
The SP481, SP483, and the SP485 are a family of half-duplex transceivers that meet the requirements of RS-485 and RS-422. Their BiCMOS design allows low power operation without sacrificing performance. The SP481 and SP48...SP-480
Vendor:Other Category:Other
SP4740NADP
Vendor:Other Category:Other
The SP4740NADP is one member of the SP4740 family which is designed as the 4256 prescaler that is one of GPS' range of high speed dividers for consumer frequency synthesis and measurement systems. This device has a low s...SP4740
Mfg:GSSR Pack:DIP Vendor:Other Category:Other
The SP4740 4256 prescaler is one of GPS' range of high speed dividers for consumer frequency synthesis and measurement systems. It has a low supply current, giving reduced dissipation and operating temperatures in an 8-p...SP4666
Mfg:SIPEX Pack:SOP8 Vendor:Other Category:Other
The SP4666 is a selectable division ratio high speed divider capable of replacing separate fixed ratio ECL prescalers with a single part in applications with alternative 464 and 4256 division requirements.A switched low...SP4653
Vendor:Other Category:Other
The SP4653 is designed as the 4256 prescaler that is one of GPS' range of high speed dividers for consumer frequency synthesis and measurement systems. This device has a low supply current, giving reduced dissipation and...SP-45ML
Vendor:Other Category:Other
The SP-45ML is designed as one kind of silicon photodiode device that can be used in (1)optical detectors; (2)infrared sensors; (3)smoke detectors applications. And the features of this device are:(1)relatively low-cost ...SP45ML
Vendor:Other Category:Other
The SP45ML is designed as one kind of silicon photodiode device that can be used in (1)optical detectors; (2)infrared sensors; (3)smoke detectors applications. And the features of this device are:(1)relatively low-cost a...SP4501
Pack:SOP14 D/C:00+ Vendor:Other Category:Other
The SP4501 provides designers with both an electroluminescent lamp driver for backlighting and a piezotransducer driver to generate audio alert tones. The integration of an EL lamp driver and a piezotransducer driver in ...SP4491
Mfg:PHILISP Pack:06+ Vendor:Other Category:Other
The SP4491 electroluminescent lamp driver provides designers of cell phones PDA's and other handheld, portable electronic devices with an integrated solution for driving two EL lamps independently or concurrently. The S ...SP4490
Vendor:Other Category:Other
The SP4490 electroluminescent lamp driver provides designers of cell phones PDA's and other handheld, portable electronic devices with an integrated solution for driving two EL lamps independently. It reduces system cost...SP4480
Vendor:Other Category:Other
The SP4480 provides a designer with two electroluminescent lamp drivers for backlighting solutions. The EL lamp outputs operate in opposite phase so he SP4480 device can be easily implemented into applications driving tw...SP4446EB
Vendor:Other Category:Other
The SP4446EB is one member of the SP4446 family which is designed as one kind of evaluation board device that has a fixed output voltage programmed to +5V (consult the factory for other voltage options). This device is a...SP4446
Mfg:SIPEX D/C:06+ Vendor:Other Category:Other
The SP4446 is a micro power Boost Regualtor in a 5-lead SOT-23 package. It is a current limited, fixed off time regulator configured for use in boost mode applications. The operating voltage can be less than 3V and is ca...SP4438
Vendor:Other Category:Other
The SP4438 device is a low noise, high voltage output DC-AC inverter designed to drive electroluminescent lamps to backlight liquid crystal display and keypads used in cellular phones, cordless phones, 2-way radios, and ...SP4428
Mfg:SOP8 Pack:800 D/C:SIPEX Vendor:Other Category:Other
The SP4428 is a high voltage output DC-AC converter that can operate from a single 1.5 VDC power supply. It is capable of supplying 200 VPP (typical), making it ideal for driving electroluminescent lamps. The device feat...SP4427
Vendor:Other Category:Other
The SP4427 is a high voltage output DC-AC converter that can operate from a single 1.5 Vdc battery supply. The SP4427 is capable of supplying up to 250 Vpp signals, making it ideal for driving electroluminescent lamps. T...SP4425
Mfg:SOP8 Pack:800 D/C:SIPEX Vendor:Other Category:Other
The SP4425 is a high voltage output DC-AC converter that can operate from a single 1.5 VDCpower supply. The SP4425 is capable of supplying up to 220 VPP signals, making it ideal for driving electroluminescent lamps. The ...SP4424
Mfg:SOP8 Pack:800 D/C:SIPEX Vendor:Other Category:Other
The SP4424 is a high voltage output DC-AC converter that can operate from a single battery supply voltage as low as 2.2V. The Sp4424 is capable of supplying up to 220 VPP signals, making it ideal for driving electrolumin...SP4423
Mfg:Sipex Pack:SOP8 D/C:N/A Vendor:Other Category:Other
The SP4423 is a high voltage output DC-AC converter that can operate from a 2.2V-6.0V power supply. It is capable of supplying up to 200 VPP signals, making it ideal for driving electroluminescent lamps. The device featu...SP4422A
Vendor:Other Category:Other
The SP4422A is a high voltage output DC-AC converter that can operate from a 2.2V-5.0V power supply. It is capable of supplying up to 220 VPP signals, making it ideal for driving electroluminescent lamps. The device feat...SP4416
Vendor:Other Category:Other
The SP4416 is a high voltage output DC-AC converter that operates from a 3.3V battery and generates up to 220VPP AC output. As with Sipex's other electroluminescent driver products, the AC output is used to generate ligh...SP4415
Vendor:Other Category:Other
The SP4415 is a single chip DC-AC converter ideally suited for driving electroluminescent panels to four intensity levels. The SP4415 is capable of converting DC input voltages as low as 2.2V into any of four AC voltage ...SP4414
Vendor:Other Category:Other
The SP4414 is a high voltage output DC-AC inverter specifically designed to drive electroluminescent lamps to backlight liquid crystal displays, keypads, and backlit readouts used in battery operated portable equipment. ...SP4412A
Mfg:23 Pack:SIPEX D/C:TSOP8 Vendor:Other Category:Other
The SP4412A is a high voltage output DC-AC converter that can operate from a 2.2V-3.6V power supply. The SP4412A is capable of supplying up to 250 VPP signals, making it ideal for driving small electroluminescent lamps. ...SP4405
Vendor:Other Category:Other
The SP4405 is a high voltage output DC-AC inverter specifically designed to drive electroluminescent lamps to backlight liquid crystal displays, keypads, and backlit readouts used in battery operated portable equipment. ...SP4403
Vendor:Other Category:Other
The SP4403 is a high voltage output DC-AC inverter specifically designed to drive electroluminescent lamps to backlight liquid crystal displays, keypads, and backlit readouts used in battery operated portable equipment. ...SP432
Vendor:Other Category:Other
The SP432 is low-voltage three-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1...SP431
Mfg:SP Pack:TO-92 D/C:07+ Vendor:Other Category:Other
The SP431 is high-voltage three-terminal adjustable voltage references, with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (...SP4082E
Vendor:Other Category:Other
SP4010
Vendor:Other Category:Other
The SP4010 is one kind of high accuracy,high speed,FET input buffer providing up to +-50 mA of continuous current at frequencies from DC to 60 MHz.High linearity,low offset,and excellent stability make it an ideal candid...SP3T
Vendor:Other Category:Other
SP3R1224MC
Vendor:Other Category:Other
SP2 and SP3R1224MC Series Speaker/Strobes offer enhanced features that include the widest range of candela options available, the capability to self-adjust for 12 or 24 volt operation, and the fidelity sound quality expe...SP-3ML
Vendor:Other Category:Other
The SP-3ML is designed as one kind of silicon photodiode device that can be used in (1)optical detectors; (2)infrared sensors; (3)smoke detectors applications. And the features of this device are:(1)relatively low-cost a...SP385E-1
Vendor:Other Category:Other
The Sipex SP385E-1 is an enhanced version of the Sipex SP200 family of RS232 line drivers/receivers. The SP385E-1 offers +3.3V operation for EIA-562 and EIA-232 applications.The SP385E-1 maintains the same performance fe...