© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
The '165 and 'LS165A are 8-bit serial shift registers that shift the data in the direction of QA toward QH when clocked. Parallel-in access to each stage is made available by eight individual, direct data inputs that are...
Vendor:Other Category:Other
These monolithic hex inverter buffers/drivers N54LS06 and SN54LS16 feature high-voltage open-collector outputs to interface with high-level circuits (such as MOS), or or driving high-current loads, and are also haracteri...
Vendor:Other Category:Other
These TTL encoders feature priority decoding of the inputs to ensure that only the highest-order data line is encoded. The '147 and 'LS147 devices encode nine data lines to four-line (8-4-2-1) BCD. The implied decimal ...
Mfg:TM D/C:N/A Vendor:Other Category:Other
These TTL encoders feature priority decoding of the inputs to ensure that only the highest-order data line is encoded. The '147 and 'LS147 devices encode nine data lines to four-line (8-4-2-1) BCD. The implied decimal ...
Vendor:Other Category:Other
The SN54LS145 is one of the SN54145 series.The SN54LS145 is a monolithic,this monolithic BCD-to-decimal decoder/drivers consist of eight inverters and ten four-input NAND gates.The inverters are connected in pairs to mak...
Mfg:TI Pack:DIP D/C:05+ Vendor:Other Category:Other
Each circuit functions as an inverter, but because of the Schmitt action, SN54LS14 has different input threshold levels for positive-going (VT+) and negative-going (VT-) signals. SN54LS14 is temperature compen...
Vendor:Other Category:Other
The Schottky-calmped TTL MSI circuit SN54LS139A is designed to be used in high-performance memory-decoding or data-routing applications requiring very short propagation delay times.In high-performance memory systems, SN5...
Vendor:Other Category:Other
The Schottky-clamped TTL MSI circuit SN54LS138 is designed to be used in high-performance memory deconding or data-routing applications requiring very short propagation delay times.In high-performance memory systems, SN5...
Vendor:Other Category:Other
Vendor:Other Category:Other
These bus buffers feature three-state outputs that, when enabled, have the low impedance characteristics of a TTL output with additional drive capability at high logic levels to permit driving heavily loaded bus lines wi...
Vendor:Other Category:Other
These bus buffers feature three-state outputs that, when enabled, have the low impedance characteristics of a TTL output with additional drive capability at high logic levels to permit driving heavily loaded bus lines wi...
Vendor:Other Category:Other
The SN54LS114A is a dual j-k negative-edge-triggered flip-flops with preset, common clear, and common clock.SN54LS114A contains two independent J-K negative-edge-triggered flip-flops. A tow level at the preset and clear ...
Vendor:Other Category:Other
The SN54LS112A is a dual j-k negative-edge-triggered flip-flops with preset and clear.These devices contain twn independent J-K negative-edge-triggered flip-flops. A low level at the preset and cleat inputs sets or reset...
Mfg:TI Pack:CDIP Vendor:Other Category:Other
Vendor:Other Category:Other
The SN54LS07J is one of The SN54LS07 series.These monolithic hex buffers/drivers feature high-voltage open-collector outputs to interface with high-level circuits or for driving high-current loads. They are also charac...
Vendor:Other Category:Other
These monolithic hex buffers/drivers SN54LS07 feature high-voltage open-collector outputs to interface with high-level circuits or for driving high-current loads. They are also characterized for use as buffers for drivin...
Vendor:Other Category:Other
These hex inverter buffers/drivers feature high-voltage open-collector outputs to interface with high-level circuits (such as MOS), or for driving high-current loads, and also are character-ized for use as inverter buffe...
Mfg:MOT Pack:800 Vendor:Other Category:Other
Pack:800 Vendor:Other Category:Other
SN54LS04 contains six independent inverters.
Vendor:Other Category:Other
The absolute maximum ratings of the SN54LS03 are: (1)supply voltage: 4.5V min, 5.0V typical and 5.5V max; (2)operating ambient temperature range: -55 min, 25 typical and 125 max; (3)output voltage high: 5.5V; (4)output c...
Mfg:N/A Pack:SMD D/C:07+ Vendor:Other Category:Other
SN54LS00 contains four independent 2-input NAND gates. The devices perform the Boolean function Y = A • B or Y = A + B in positive logic.
Vendor:Other Category:Other
The SN54LS323 is a low-Power Schottky.These Low-Power Schottky eight bit universal registers feature multiplexed inputs/outputs to achieve full eight bit data handling in a single 20 pin package.Two function select input...
Vendor:Other Category:Other
The SN54HCT74 contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE and...
Vendor:Other Category:Other
The SN54HCT665 is a kind of octal bus transceiver which is designed for asynchronous, bidirectional communication between data buses.The SN54HCT665 trasmits data from A bus to B bus or from the B bus to A bus, depending ...
Vendor:Other Category:Other
The SN54HCT652FK is designed as octal bus transceiver which consists of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from ...
Vendor:Other Category:Other
The 'HCT652 consist of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OE...
Vendor:Other Category:Other
The SN54HCT646FK is designed as octal bus transceiver which consists of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from ...
Vendor:Other Category:Other
The 'HCT646 devices consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal regist...
Vendor:Other Category:Other
These octal bus transceivers SN54HCT645 are designed for asynchronous two-way communication between data buses. These devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending upon the l...
Vendor:Other Category:Other
These octal bus transceivers SN54HCT623 are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing.The SN54HCT623 allow data trans...
Vendor:Other Category:Other
These octal edge-triggered D-type flip-flops of SN54HCT574 feature 3-state outputs designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus dri...
Vendor:Other Category:Other
These octal transparent D-type latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The 'HCT573 devices are particularly suitable for implementing buffer ...
Vendor:Other Category:Other
The SN54HCT563 isa kind of 8-bit latch which features three-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads.SN54HCT563 is pariticularly suitable for implementing buffer...
Vendor:Other Category:Other
These octal buffers and line drivers of SN54HCT541 are designed to have the performance of the popular 'HC240 series and to offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatl...
Vendor:Other Category:Other
These octal buffers and line drivers of SN54HCT540 are designed to have the performance of the 'HCT240 and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed c...
Vendor:Other Category:Other
The SN54HCT533 is a kind of 8-bit latch which features three-state outputs designed sepcifically for drivng highly capacitive or relatively low-impedance loads.SN54HCT533 is particularly suitable for implementing buffer ...
Vendor:Other Category:Other
These devices are positive-edge-triggered D-type flip-flops. The 'HCT377 devices are similar to the HCT273 devices, but feature a latched clock-enable (CLKEN) input instead of a common clear.Information at the data (D) ...
Vendor:Other Category:Other
These 8-bit flip-flops feature 3-state outputs of HCT374 designed specifically for driving highly capacitive or relatively low impedance loads. HCT374 is particularly suitable for implementing buffer registers, I/O p...
Vendor:Other Category:Other
These 8-bit latches feature 3-state outputs of HCT373 designed specifically for driving highly capacitive or relatively low-mpedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bid...
Vendor:Other Category:Other
The SN54HCT32 contains four independent 2-input OR gates.It performs the Boolean function in positive logic.It is characterized for operation over the full military temperature range of -55 to 125.
Features of of the SN...
Vendor:Other Category:Other
SN54HCT273 is positive-edge-triggered D-type flip-flops with a common enable input. The 'HCT273 are similar to the 'HCT377, but feature a common clear enable (CLR) input instead of a latched clock.Information at the data...
Vendor:Other Category:Other
The SN54HCT257FK is designed as quadruple 2-line to 1-line data seletors / multiplexers with 3-state outputs to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outpu...
Vendor:Other Category:Other
The 'HCT257 devices are designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs do not load the data lines when the output-enable (OE) input is at the hi...
Vendor:Other Category:Other
These octal bus transceivers of HCT245 are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.The 'HCT245 devices allow data tra...
Vendor:Other Category:Other
These octal buffers and line drivers HCT244 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The'H...
Vendor:Other Category:Other
These monolithic data selectors/multiplexers SN54HCT157 contain inverters and drivers to supply full data selection to the four output gates. A separate strobe (G) input is provided. A 4-bit word is selected from one of ...
Vendor:Other Category:Other
The SN54HCT14 devices contain six independent inverters. The devices perform the Boolean function Y = A in positive logic. The SN54HCT14 is characterized for operation over the full military temperature range ...
Vendor:Other Category:Other
The SN54HCT139 are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders of SN54HCT139 can minimize th...
Vendor:Other Category:Other
The SN54HCT138 are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can minimize the effects of s...
Vendor:Other Category:Other
These bus buffers feature independent line drivers with 3-state outputs. Each output is disabled when the associated OE is low. The SN54HCT126 is characterized for operation over the full military temperature range of 55...
Vendor:Other Category:Other
These bus buffer gates feature independent line drivers with 3-state outputs. Each output is disasbled when the associated output-enable (OE) input is high. The SN54HCT125 is characterized for operation over the full mil...
Vendor:Other Category:Other
These devices contain four independent 2-input AND gates. They perform the Boolean function Y = A • B or Y= A+B in positive logic. The SN54HCT08 is characterized for operation over the full military temperature ran...
Vendor:Other Category:Other
SN54HCT04 contains six independent inverters. They perform the Boolean function Y = A in positive logic.The SN54HCT04 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74HCT0...
Vendor:Other Category:Other
These devices contain four independent 2-input NOR gates. They perform the Boolean function Y = A • B or Y = A + B in positive logic. The SN54HCT02 is characterized for operation over the full military temperature ...
Vendor:Other Category:Other
SN54HCT00 contains four independent 2-input NAND gates. They perform the Boolean function Y = A • B or Y = A + B in positive logic. The SN54HCT00 is characterized for operation over the full military temperature ra...
Vendor:Other Category:Other
Vendor:Other Category:Other
The 'HC74 devices contain two independent D-type positive-edge-triggered flip-flops. A low level at the preset (PRE ) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When ...
Vendor:Other Category:Other
The SN54HC7266 is a kind of quadruple 2-input exclusive-NOR gate which is composed of four independent 2-input exclusive-NOR gate.
Features of of the SN54HC7266 are:(1)package options include plastic small-outline (D) p...
Vendor:Other Category:Other
The SN54HC7074 are comprised of the sections:two inverters,one 2-input NOR gate, one 2-input NAND gate, two D-type flip-flops.The D-type flip-flops are positive-edge-triggered and are functionally similar to it.
Feature...
Vendor:Other Category:Other
SN54HC7032, each circuit functions as a quadruple OR gate. They perform the Boolean function Y = A • B or Y = A+B in positive logic. However, because of the Schmitt action, the inputs have different input threshold...
Vendor:Other Category:Other
In these devices, each circuit functions as a quadruple NOR gate. SN54HC7002 perform the Boolean function Y = A • B or Y = A + B in positive logic. However, because of the Schmitt action, the inputs have different ...
Vendor:Other Category:Other
Each circuit functions as a quadruple AND gate. SN54HC7001 perform the Boolean function Y = A • B or Y = A+B in positive logic. Because of the Schmitt action, the inputs have different input threshold levels for po...
Vendor:Other Category:Other
These identity SN54HC688 comparators perform comparisons of two 8-bit binary or BCD words. An output-enable (OE) input may be used to force the output to the high level.The SN54HC688 is characterized for operation over t...
Vendor:Other Category:Other
These magnitude SN54HC684 comparators perform comparisons of two 8-bit binary or BCD words. These devices provide P = Q and P > Q outputs.The SN54HC684 is characterized for operation over the full military temperature...
Vendor:Other Category:Other
Vendor:Other Category:Other
The SN54HC664 is a kind of octal bus transceiver which is designed for asynchronous, bidirectional communication between data buses.SN54HC664 trasmits data from the A bus to the B bus or from the B bus to the A bus, depe...
Vendor:Other Category:Other
SN54HC652 consists of bus-transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. Output-enable (OEA...
Vendor:Other Category:Other
The SN54HC646 consist of bus-transceiver circuits with 3-state outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or from the internal registers. D...
Vendor:Other Category:Other
These octal bus transceivers SN54HC645 are designed for asynchronous two-way communication between data buses. These devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending upon the le...
Vendor:Other Category:Other
The SN54HC643 is a kind of octal bus transceiver which is designed for asvnchronous two-way communication between data buses.The SN54HC643 transmit data from the A bus to the B bus or from the B bus to the A bus dependin...
Vendor:Other Category:Other
These octal bus transceivers SN54HC640 are designed for asynchronous two-way communication between data buses. These devices transmit data from the A bus to the B bus or from the B bus to the A bus, depending upon the le...
Vendor:Other Category:Other
These octal bus transceivers SN54HC623 are designed for asynchronous two-way communication between data buses. The control-function implementation allows for maximum flexibility in timing.The SN54HC623 allow data transmi...
Vendor:Other Category:Other
The 'HC595 devices contain an 8-bit serial-in,parallel-out shift register that feeds an 8-bit D-type storage register. The storage register has parallel 3-state outputs. Separate clocks are provided for both the shift an...
Vendor:Other Category:Other
The SN54HC594 devices contain an 8-bit serial-in, parallel-out shift register that feeds an 8-bit D-type storage register. Separate clocks and direct overriding clear (RCLR, SRCLR) inputs of SN54HC594 are provided on bot...
Vendor:Other Category:Other
The 'HC590A devices contain an 8-bit binary counter that feeds an 8-bit storage register. The storage register has parallel outputs. Separate clocks are provided for both the binary counter and storage register. The bina...
Vendor:Other Category:Other
These octal edge-triggered D-type flip-flops of SN54HC574 feature 3-state outputs designed specifically for bus driving. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus ...
Vendor:Other Category:Other
These octal transparent D-type latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ...
Vendor:Other Category:Other
The SN54HC564-8-bit latch features three-state outputs designed specifically for bus driving.It is particularly suitable for implementing buffer register, I/O ports, bidirectional bus drivers, and working registers.
Fea...
Vendor:Other Category:Other
These 8-bit transparent D-type latches SN54HC563 feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance oads. They are particularly suitable for implementing buffer regist...
Vendor:Other Category:Other
These octal buffers and line drivers feature the performance of the 'HC240 devices and a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly facilitates printed circuit board layout....
Vendor:Other Category:Other
These octal buffers and line drivers SN54HC540 feature the performance of the popular 'HC240 series and offer a pinout with inputs and outputs on opposite sides of the package. This arrangement greatly enhances printed c...
Vendor:Other Category:Other
These 8-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. SN54HC534 is particularly suitable for implementing buffer registers, I/O ports, bidir...
Vendor:Other Category:Other
The SN54HC4727 is a kind of 8-bit addressable latch which is designed for general purpose storage applications in digital systems.Specific uses include working registers, serial-holding registers, and active-high decoder...
Vendor:Other Category:Other
The SN54HC4514 presents two output options of a 4-line to 16-line decoder with latched inputs.It presents a high level at the selected output.SN54HC4514 consists of four storage latches with common latch enabl and inhibi...
Vendor:Other Category:Other
These monolithic decimal decoders consist of eight inverters and ten 4-input NAND gates. The SN54HC42 is connected in pairs to make BCD input data available for decoding by the NAND gates. Full decoding of valid input lo...
Vendor:Other Category:Other
The SN54HC4078A contains a single 8-input OR/NOR gates.
Features of of the SN54HC4078A are:(1)package options include plastic small-outline (D) packages, ceramic chip carriers(FK) and standard plastic(N) and standard pl...
Vendor:Other Category:Other
The SN54HC4075 contains three independent 3-input OR gates and perform the Boolean functions in positive logic.
Features of of the SN54HC4075 are:(1)package options include plastic small-outline (D) packages, ceramic ch...
Vendor:Other Category:Other
The SN54HC4061 consists of an oscillator section and 14 ripple-carry binary counter stages.The oscillator configuration allows design of either RC or crystal oscillator circuits. A high-to-low transition on the clock inp...
Vendor:Other Category:Other
The SN54HC4060 consist of an oscillator section and 14 ripple-carry binary counter stages. The oscillator configuration allows design of either RC or crystal-oscillator circuits. A high-to-low transition on the clock (CL...
Vendor:Other Category:Other
The SN54HC4024 is an asynchronous 7-stage binary counter designed with an input pulse-shaping circuit.The outputs of all stages are available externally.A high clear signal asycnronously clears the counter and resets all...
Vendor:Other Category:Other
SN54HC4020 is 14-stage binary ripple-carry counters that advance on the negative-going edge of the clock pulse. The counters are reset to zero (all outputs low) independently of the clock (CLK) input when the clear (CLR)...
Vendor:Other Category:Other
The SN54HC4017 is a 5-stage divide-by-10 Johnson counter with ten decoded outputs and a carry-out bit.High-speed operation and spike-free outputs are obtianed by use of the Johnson decade counter configuration.
Features...
Vendor:Other Category:Other
The SN54HC4002 contains four independent 2-input OR gates.It performs the Boolean function in positive logic.It is characterized for operation over the full military temperature range of -55 to 125.
Features of of the S...
Vendor:Other Category:Other
The 'HC393 devices contain eight flip-flops and additional gating to implement two individual 4-bit counters in a single package.These devicescomprise two independent 4-bit binary counters, each having a clear (CLR) and ...
Vendor:Other Category:Other
The SN54HC378 is a kind of circuit which is postive-edge-triggered D-type flip-flop with an enable input.It features a latched clock enable instead of a common clear.
Features of of the SN54HC378 are:(1)contains eight a...
Mfg:TI Pack:CDIP D/C:10 Vendor:Other Category:Other
These devices are positive-edge-triggered octal D-type flip-flops with an enable input. The 'HC377 devices are similar to the 'HC273 devices, but feature a latched clock-enable (CLKEN) input instead of a common clear.Inf...
Vendor:Other Category:Other
These 8-bit flip-flops of SN54HC374 feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. SN54HC374 is particularly suitable for implementing buffer registers, I/O...
Vendor:Other Category:Other
These 8-bit latches feature 3-state outputs SN54HC373 designed specifically for driving highly capacitive or relatively low-impedance loads. SN54HC373 is particularly suitable for implementing buffer registers, I/O ports...
Vendor:Other Category:Other
These hex buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The SN54HC368 are or...
Vendor:Other Category:Other
These hex buffers and line drivers are designedspecifically to improve both the performance anddensity of 3-state memory address drivers, clockdrivers, and bus-oriented receivers andtransmitters. The 'HC367 devices are o...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.