© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
These hex buffers and line drivers are designedspecifically to improve both the performance anddensity of 3-state memory address drivers, clockdrivers, and bus-oriented receivers andtransmitters. The 'HC365 devices conta...
Vendor:Other Category:Other
The SN54HC354 is a kind of monolithic data selector/multiplexer contains full on-chip binary decoding to select one of eight data sources.The data-select of SN54HC354 is stored in transparent latches that are enabled by ...
Vendor:Other Category:Other
The 'HC32 devices contain four independent 2-input OR gates. They perform the Boolean function YA ` B or Y A B in positive logic.
Vendor:Other Category:Other
The SN54HC283-improved full adders performs the addition of two 4-bit binary words.The sum outputs are provided for each bit, and the resultant carry(C4) is obtained from the fourth bit.
Features of of the SN54HC283 are...
Vendor:Other Category:Other
The SN54HC280-universal, monolithic, nine-bit parity generators/checkers feature odd and even outputs to facilitate operation of either odd or even parity application.The word-length capability is easily expanded by casc...
Mfg:TI Pack:CDIP D/C:15 Vendor:Other Category:Other
These circuits of SN54HC273 are positive-edge-triggered D-type flip-flops with a direct clear (CLR) input.Information at the data (D) inputs SN54HC273 meeting the setup time requirements is transferred to the Q outputs o...
Vendor:Other Category:Other
SN54HC27 contains three independent 3-input NOR gates. They perform the Boolean function Y = A + B + C or Y = A • B • C in positive logic.The SN54HC27 is characterized for operation over the full military tem...
Mfg:TI Pack:CDIP D/C:4 Vendor:Other Category:Other
The SN54HC266 are composed of four independent2-input exclusive-NOR gates and featureopen-drain outputs. They perform the Booleanfunction Y =AB or Y = AB + AB in positive logic.The SN54HC266 is characterized for operatio...
Mfg:TI Pack:CDIP D/C:12 Vendor:Other Category:Other
These 8-bit addressable SN54HC259 latches are designed for general-purpose storage applications in digital systems. Specific uses include working registers, serial-holding registers, and active-high decoders or demultipl...
Vendor:Other Category:Other
SN54HC258 is designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organizedsystems. The 3-state outputs do not load the data lines when the output-enable (G) input is at a high logic level....
Mfg:TI Pack:CDIP D/C:60 Vendor:Other Category:Other
SN54HC257 designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organizedsystems. The 3-state outputs do not load the data lines when the output-enable (G) input is at a high logic level.To ...
Mfg:TI Pack:CDIP D/C:20 Vendor:Other Category:Other
Each of these data selectors/multiplexers contain inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate output-control inputs of SN54HC253 are provided for each of the two 4-li...
Mfg:TI Pack:CDIP D/C:20 Vendor:Other Category:Other
These data selectors/multiplexers contain full binary decoding to select 1-of-8 data sources and feature strobe-controlled complementary 3-stateoutputs.The 3-state outputs of SN54HC251 can interface with and drive data ...
Mfg:TI Pack:CDIP D/C:6 Vendor:Other Category:Other
These octal bus transceivers of SN54HC245 are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.The SN54HC245 allow data transm...
Mfg:TI Vendor:Other Category:Other
These octal buffers and line drivers are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The 'HC244 devices...
Mfg:TI Pack:CDIP D/C:7 Vendor:Other Category:Other
These octal buffers and line drivers SN54HC241 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The 'HC2...
Mfg:TI Pack:CDIP D/C:5 Vendor:Other Category:Other
These octal buffers and line drivers SN54HC240 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. The 'HC2...
Vendor:Other Category:Other
The SN54HC237 is a three-line to eight-line decoder/demultiplexer with latches on the three address inputs. When the latch-enable is low, SN54HC237 acts as a decoder/demultiplexer.When GL goes from low to high, the addre...
Vendor:Other Category:Other
These devices contain two independent 4-input AND gates. SN54HC21 performs the Boolean function Y = A • B • C • D or Y= A+B+C+D in positive logic. The SN54HC21 is characterized for operation over the fu...
Vendor:Other Category:Other
The SN54HC20 devices contain two independent 4-input NAND gates. They perform the Boolean function Y =A • B • C • D or Y = A + B +C + D in positive logic. The SN54HC20 is characterized for operation ove...
Vendor:Other Category:Other
The 'HC193 devices are 4-bit synchronous, reversible, up/down binary counters.Synchronous operation HC193 is provided by having all flip-flops clocked simultaneously so that the outputs change coincidentally with each ot...
Mfg:TI Pack:CDIP D/C:19 Vendor:Other Category:Other
The SN54HC193 are 4-bit synchronous, reversible, up/down binary counters. Synchronous operation is provided by having all flip-flops clockedsimultaneously so that the outputs change coincidentally with each other when so...
Mfg:TI Pack:DIP D/C:08+ Vendor:Other Category:Other
The SN54HC191 are 4-bit synchronous, reversible, up/down binary counters. Synchronous counting operation is provided by having all flip-flops clocked simultaneously so that the outputs change coincident with each other w...
Mfg:TI Pack:CDIP D/C:20 Vendor:Other Category:Other
These monolithic positive-edge-triggered D-type flip-flops have a direct clear (CLR) input. The SN54HC175 feature complementary outputs from each flip-flop. Information at the data (D) inputs meeting the setup time requi...
Vendor:Other Category:Other
These monolithic positive-edge-triggered D-type flip-flops have a direct clear (CLR) input. Information at the data (D) inputs SN54HC174 meeting the setup time requirements is transferred to the outputs on the positive-g...
Vendor:Other Category:Other
The SN54HC166 parallel-in or serial-in, serial-outregisters feature gated clock (CLK, CLK INH)inputs and an overriding clear (CLR ) input. Theparallel-in or serial-in modes are established bythe shift/load (SH/LD ) input...
Mfg:TI Pack:CDIP D/C:10 Vendor:Other Category:Other
The 'HC165 devices are 8-bit parallel-load shift registers that, when clocked, shift the data toward a serial (QH output. Parallel-in access to each stage is provided by eight individual direct data (A-H) inputs that are...
Vendor:Other Category:Other
These 8-bit shift registers SN54HC164 feature AND-gated serial inputs and an asynchronous clear (CLR) input. The gated serial (A and B) inputs permit complete control over incoming data; a low at either input inhibits ...
Mfg:TI Pack:CDIP D/C:21 Vendor:Other Category:Other
These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The 'HC163 devices are 4-bit binary counters. Synchronous operation 'HC163 is provided by havin...
Mfg:TI Pack:CDIP D/C:4 Vendor:Other Category:Other
These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting designs. The 'HC161 devices are 4-bit binary counters. Synchronous operation is provided by having all f...
Vendor:Other Category:Other
The SN54HC158FK is one member of the SN54HC158 series.These monolithic data selectors/multiplexers contain inverters and drivers to supply full data selection to the four output gates. A separate strobe (G) input is prov...
Vendor:Other Category:Other
These monolithic data selectors/multiplexers SN54HC158 contain inverters and drivers that supply full data selection to the four output gates. A separate strobe (G) input is provided. A 4-bit word is selected from one of...
Vendor:Other Category:Other
These data selectors/multiplexers 'HC157 contain inverters and drivers to supply full data selection to the four output gates. A separate strobe (G) input is provided. A 4-bit word is selected from one of two sources and...
Vendor:Other Category:Other
Each of these data selectors/multiplexers of SN54HC153 contains inverters and drivers to supply full binary decoding data selection to the AND-OR gates. Separate strobe (G) inputs are provided for each of the two 4-line ...
Vendor:Other Category:Other
These monolithic data selectors/multiplexers of SN54HC151 provide full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the inputs. A high level at the stro...
Vendor:Other Category:Other
The 'HC148 feature priority decoding of the inputs to ensure that only the highest-order data line is encoded. SN54HC148 encode eight data lines to 3-line (4-2-1) binary (octal). Cascading circuitry (enable input EI and ...
Vendor:Other Category:Other
These Schmitt-trigger devices contain six independent inverters. SN54HC14 performs the Boolean functio Y = A in positive logic.
Vendor:Other Category:Other
The SN54HC139 is designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can minimize the effects of sys...
Vendor:Other Category:Other
The SN54HC138 is designed to be used in high-performance memory-decoding or datarouting applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to minimiz...
Vendor:Other Category:Other
The SN54HC132J is designed as one kind of quadruple positive-nand gates with schmitt-trigger inputs.Features of SN54HC132J are:(1)wide operating voltage range of 2 V to 6 V;(2)outputs can drive up to 10 LSTTL loads;(3)lo...
Vendor:Other Category:Other
Each circuit functions as a NAND gate, but because of the Schmitt action, it has different input threshold levels for positive- and negative-going signals. The SN54HC132 perform the Boolean function Y =A • B or Y =...
Vendor:Other Category:Other
These quadruple bus buffer gates SN54HC126 feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is low.The SN54HC126 is characterized for operation o...
Vendor:Other Category:Other
These quadruple bus buffer gates SN54HC125 feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is high.The SN54HC125 is characterized for operation ...
Mfg:TI Pack:01+ D/C:1450
Vendor:Other Category:Other
The SN54HC112 devices contain two independent J-K negative-edge-triggered flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PR...
Mfg:TI Pack:DIP D/C:08+ Vendor:Other Category:Other
The SN54HC11 contains three independent 3-input AND gates. They perform the Boolean function Y = A • B • C or Y =A+B+C in positive logic.
Vendor:Other Category:Other
The SN54HC109 contains two independent J-K negative-edge-triggered flip-flop. A low level at the Preset or clear inputs sets or resets the outputs regardless of the levels of the other inputs.
Features of of the SN54HC1...
Mfg:TI Pack:38 D/C:CDIP Vendor:Other Category:Other
These devices contain three independent 3-input NAND gates. They perform the Boolean function Y = A • B • C or Y =A +B + C in positive logic. The SN54HC10 is characterized for operation over the full military...
Mfg:TI Pack:01+ D/C:1200
Vendor:Other Category:Other
These devices contain four independent 2-input AND gates.They perform the Boolean function Y = A • B or Y = A+B in positive logic. The SN54HC08 is characterized for operation over the full military temperature rang...
Vendor:Other Category:Other
SN54HC05 contains six independent inverters. They perform the Boolean function Y = A in positive logic. The open-drain outputs require pullup resistors to perform correctly. SN54HC05 may be connected to other open-drain ...
Mfg:TI Pack:01+ D/C:1200
Vendor:Other Category:Other
The_HC04 devices contain six independent inverters. They perform the Boolean functio Y = A in positive logic.
Vendor:Other Category:Other
SN54HC03 contains four independent 2-input NAND gates. They perform the Boolean function Y =AB or Y = A + B in positive logic. The open-drain outputs require pullup resistors to perform correctly. SN54HC03 may be connect...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The SN54GTL16923 is 18-bit registered bus transceivers that provide LVTTL-to-GTL/GTL+ and GTL/GTL+-to-LVTTL signal-level translation. They are partitioned as two 9-bit transceivers with individualoutput-enable controls a...
Vendor:Other Category:Other
The SN54GTL16622A devices are 18-bit registered bus transceivers that provide LVTTL-to-GTL/GTL+ and GTL/GTL+-to-LVTTL signal-level translation. They are partitioned as two separate 9-bit transceivers with individual...
Vendor:Other Category:Other
These 18-bit registered bus transceivers SN54GTL16622 contain two sets of D-type flip-flops for temporary storage of data flowing in either direction.The B port operates at GTL (VTT = 1.2 V and VREF = 0.8 V) and GTL+ (VT...
Vendor:Other Category:Other
The SN54GTL16616 is 17-bit universal bus transceivers (UBTs) that provide LVTTL-to-GTL/GTL+ and GTL/GTL+-to-LVTTL signal-level translation. They combine D-type flip-flops and D-type latches to allow for transparent...
Vendor:Other Category:Other
The SN54GTL16612A devices are 18-bit universal bus transceivers (UBT) that provide LVTTL-to-GTL+and GTL+-to-LVTTL signal-level translation. They allow for transparent, latched, clocked, or clock-enabled modes of ...
Vendor:Other Category:Other
The SN54GTL16612 devices are 18-bit UBTTM transceivers that provide LVTTL-to-GTL/GTL+ and GTL/GTL+-to-LVTTL signal-level translation. They combine D-type flip-flops and D-type latches to allow for transparent, latched, ...
Vendor:Other Category:Other
The ,SN54GTL1655 is high-drive (100 mA),low-output-impedance (12 W ) 16-bit universal bus transceivers (UBT) that provide LVTTL-to-GTL/GTL+ and GTL/GTL+-to-LVTTL signal-level translation. SN54GTL1655 is partitioned as tw...
Vendor:Other Category:Other
The SN54FB2040 is 8-bit transceivers designed to translate signals between TTL and backplane transceiver logic (BTL) environments.The B port operates at BTL-signal levels. The open-collector B ports are specified to sink...
Vendor:Other Category:Other
SN54F86 contains four independent 2-input exclusive-OR gates. They perform the Boolean function Y = A +B or Y = AB + AB in positive logic. A common application of SN54F86 is as a true/complement element. If one o...
Mfg:TI D/C:04+ Vendor:Other Category:Other
SN54F74 contains two independent positiveege-triggered D-type flip-flops. A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs regardless of the levels of the other inputs. When PRE and CL...
Vendor:Other Category:Other
These octal bus transceivers SN54F623 are designed for asynchronous communication between data buses. The control function implementation allows for maximum flexibility in timing.SN54F623 allows data transmission from th...
Vendor:Other Category:Other
These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. SN54F573 is particularly suitable for implementing buffer registers, I/O ports, bidirecti...
Vendor:Other Category:Other
The 4F541 octal buffer/line driver SN54F541 is ideal for driving bus lines or buffering memory address registers. The device features inputs and outputs on opposite sides of the package to facilitate printed-circuit-boar...
Vendor:Other Category:Other
These 8-bit flip-flops feature 3-state outputs SN54F534A designed specifically for driving highly capacitive or relatively low-impedance loads. SN54F534A is particularly suitable for implementing buffer registers, I/O po...
Vendor:Other Category:Other
Vendor:Other Category:Other
These identity comparators perform comparisons on two 8-bit binary or BCD words. SN54F520 provides P = Q outputs. The F520 features 20-k pullup termination resistors on the Q inputs for analog or switch data.The SN54F520...
Vendor:Other Category:Other
SN54F38 contains four independent 2-input NAND buffer gates with open-collector outputs. They perform the Boolean functions Y =A • B or Y = A + B in positive logic.The open-collector outputs require pullup resistor...
Vendor:Other Category:Other
These 8-bit flip-flops feature 3-state outputs of SN54F374 designed specifically for driving highly capacitive or relatively low-impedance loads. SN54F374 is particularly suitable for implementing buffer registers, I/O p...
Vendor:Other Category:Other
These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. SN54F373 is particularly suitable for implementing buffer registers, I/O ports, bidirecti...
Vendor:Other Category:Other
The SN54F36 is a kind of quadruple 2-input postitive-NOR gate which contains four independent 2-input NOR gates.
Features of of the SN54F36 are:(1)package options include plastic"small outline" packages, ceramic chip ca...
Vendor:Other Category:Other
The SN54F352 is a kind of dual 4-line to 1-line data selector/multiplexer. SN54F352 contains inverters and drivers to supply fully complementary binary decoding data selection to the AND-OR-invert gates.Separate strobe i...
Vendor:Other Category:Other
The SN54F350 is operationally equivalent to a 4-input multiplexer with the inputs connected so that the select code causes shifts of the data word.This makes SN54F350 possible to perform shifts of 0,1,2 or 3 places on wo...
Vendor:Other Category:Other
These 8-bit universal shift/storage registers of SN54F299 feature multiplexed I/O ports to achieve full 8-bit data handling in a single 20-pin package. Two function-select (S0, S1) inputs and two output-enable (OE1, OE2)...
Vendor:Other Category:Other
The SN54F283 is a full adder that performs the addition of two 4-bit binary words. The sum (S) outputs are provided for each bit and the resultant carry (C4) output is obtained from the fourth bit.The SN54F283 features f...
Vendor:Other Category:Other
These universal, monolithic, 9-bit parity generators/checkers feature odd and even outputs to facilitate operation of either odd or even parity application. The word-length capability of SN54F280B is easily expanded by c...
Vendor:Other Category:Other
SN54F27 contains three independent 3-input NOR gates. They perform the Boolean functions Y = A • B • C or Y = A + B + C in positive logic.The SN54F27 is characterized for operation over the full military temp...
Vendor:Other Category:Other
The SN54F258 is designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs will not load the data lines when the output-enable (OE) input is at a high logic...
Vendor:Other Category:Other
The SN54F257 is designed to multiplex signals from 4-bit data sources to 4-output data lines in bus-organized systems. The 3-state outputs will not load the data lines when the output enable (OE) input is at a high logic...
Vendor:Other Category:Other
These data selectors/multiplexers of SN54F251B contain full binary decoding to select one of eight data sources and feature strobe-controlled complementary outputs. The 3-state outputs can interface with and drive data l...
Vendor:Other Category:Other
These octal bus transceivers are designed for asynchronous communication between data buses. The SN54F245 transmit data from the A bus to the B bus or from the B bus to the A bus depending upon the logic level at the dir...
Vendor:Other Category:Other
These octal buffers and line drivers SN54F244 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Tak...
Vendor:Other Category:Other
These quadruple bus transceivers of SN54F242 are designed for asynchronous communications between data buses. The control function implementation allows for maximum flexibility in timing. These devices allow data transmi...
Vendor:Other Category:Other
These octal buffers and line drivers SN54F241 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Taken tog...
Mfg:TI D/C:04+ Vendor:Other Category:Other
These octal buffers and line drivers SN54F240 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters. Taken tog...
Vendor:Other Category:Other
SN54F21 contains two independent 4-input AND gates. They perform the Boolean functions Y = A • B • C • D or Y = A + B + C + D in positive logic.The SN54F21 is characterized for operation over the full m...
Vendor:Other Category:Other
SN54F20 contains two independent 4-input NAND gates. They perform the Boolean functions Y = A • B • C • D or Y = A + B + C + D in positive logic.The SN54F20 is characterized for operation over the full ...
Vendor:Other Category:Other
These monolithic, positive-edge-triggered flipflops of SN54F175 utilize TTL circuitry to implement D-type flip-flop logic with a direct clear (CLR) input. Information at the data (D) inputs meeting setup time requirement...
Vendor:Other Category:Other
The 4F158A is a quadruple 2-input data selector/multiplexer featuring a direct strobe (G) input. When the strobe is high, all outputs are high. When the strobe is low, a 4-bit word is selected from one of two sources and...
Vendor:Other Category:Other
The SN54F157A is a quadruple 2-input data selector/multiplexer featuring a common strobe (G</a>) input. When the strobe is high, all outputs are low. When the strobe is low, a 4-bit word is selected from one of two...
Vendor:Other Category:Other
These monolithic data selectors/multiplexers SN54F151B provide full binary decoding to select one of eight data sources. The strobe (G) input must be at a low logic level to enable the data selection/multiplexing functio...
Vendor:Other Category:Other
The SN54F138 is designed to be used in high-performance memory-decoding or datarouting applications requiring very short propagation delay times. In high-performance memory systems, these decoders of SN54F138 can be ...
Vendor:Other Category:Other
SN54F11 contains three independent 3-input AND gates. They perform the Boolean functions Y = A • B • C or Y = A + B + C in positive logic. The SN54F11 is characterized for operation over the full milit...
Vendor:Other Category:Other
SN54F10 contains three independent 3-input NAND gates. They perform the Boolean functions Y = A • B • C or Y = A +B + C in positive logic. The SN54F10 is characterized for operation over the full mil...
Vendor:Other Category:Other
SN54F04 contains six independent inverters.They perform the Boolean function Y = A.
The SN54F04 is characterized for operation over the full military temperature range of 55°C to 125°C. The SN74F04 is characteri...
Vendor:Other Category:Other
SN54F02 contains four independent 2-input NOR gates. They perform the Boolean functions Y = A • B or Y =A + B in positive logic.
The SN54F02 is characterized for operation over the full military temperatu...
Vendor:Other Category:Other
SN54F00 contains four independent 2-input NAND gates. They perform the Boolean functions Y = A • B or Y =A + B in positive logic. The SN54F00 is characterized for operation over the full military temperature...
Vendor:Other Category:Other
The SN54CDC586 is a high-performance, low-skew, low-jitter clock driver. It uses a phase-lock loop (PLL) to precisely align, in both frequency and phase, the clock output signals to the clock input (CLKIN) signal. It is ...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.