About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index I : IDTQS3257,IDTQS3253,IDT7MP4060,
IDTQS3257
Mfg:IDT Vendor:Other Category:Other
The QS3257 is a high-speed CMOS LVTTL-compatible Quad 2:1 multiplexer/demultiplexer. The QS3257 is a function and pinout compatible QuickSwitch version of the 74F257, 74FCT257, and the 74ALS/AS/LS257 Quad 2:1 multip...IDTQS3253
Mfg:IDT Vendor:Other Category:Other
The QS3253 is a high-speed CMOS TTL-compatible dual 4:1 multi plexer/demultiplexer with 3-state outputs. The QS3253 is function and pinout compatible version of the 74F253, 74FCT253, and the 74ALS/AS/LS253 dual 4:1 m...IDTQS3251
Mfg:IDT Pack:SOP D/C:99+ Vendor:Other Category:Other
The QS3251 is a high-speed CMOS TTL-compatible 8:1 multiplexer/demultiplexer. The QS3251 has 3-state outputs. The QS3251 is a function and pinout compatible version of the 74F251, 74FCT251 and the 74ALS/AS/LS251 8:1...IDTQS3245
D/C:07+ Vendor:Other Category:Other
The QS3245 provides a set of eight high-speed CMOS TTL-compatible bus switches in a pinout compatible with 74FCT245, 74F245, 74ALS/AS/LS245 8-bit transceivers. The low ON resistance of the QS3245 allows inputs to be co...IDTQS3244
Vendor:Other Category:Other
The QS3244 provides a set of eight high-speed CMOS TTL-compatible bus switches in a pinout compatible with 74FCT244, 74F244, 74ALS/AS/LS244 8-bit drivers. The low ON resistance (5) of the 3244 allows inputs to be conne...IDTQS32390
Vendor:Other Category:Other
The QS32390 provides a 16:8 multiplexer logic switch. The QS32390 has an internal 25 resistor to reduce reflection noise in high-speed applica-tions. The enable inputs connect one of two inputs to the common I/O pin,re...IDTQS32384
Vendor:Other Category:Other
The QS32384 provides a set of ten high-speed CMOS, TTL-compatible bus switches. Two banks of five switches are controlled by independent Bus Enable (BE) signals. The QS32384 adds an internal series resistor with each...IDTQS32257
Vendor:Other Category:Other
The QS32257 is a high-speed CMOS LVTTL-compatible Quad 2:1 multiplexer/demultiplexer. The QS32257 is a function and pinout compatible QuickSwitch version of the 74F257, 74FCT257, and the 74ALS/AS/LS257 Quad 2:1 mult...IDTQS32253
Vendor:Other Category:Other
The QS32253 is a high-speed CMOS TTL-compatible dual 4:1 multi-plexer/demultiplexer with 3-state outputs. The QS32253 is function and pinout compatible version of the 74F253, 74FCT253, and the 74ALS/AS/LS253 dual 4:1 m...IDTQS32245
Vendor:Other Category:Other
The QS32245 provides a set of eight high-speed CMOS TTL-compatible bus switches in a pinout compatible with 74FCT245, 74F245, 74ALS/AS/LS245 8-bit transceivers. The Output Enable (OE) signal turns the switches on simi...IDTQS32244
Vendor:Other Category:Other
The QS32244 provides a set of eight high-speed CMOS TTL-compatible bus switches in a pinout compatible with 74FCT244, 74F244, 74ALS/AS/ LS244 8-bit drivers. The two enable (xG) signals turn the switches on similar to the...IDTQS316245
Vendor:Other Category:Other
The QS316245 provides a set of 16 high-speed CMOS TTL-compatible bus switches (two banks of 8 switches each) in a flow-thru pinout. The low ON resistance of the QS316245 allows inputs to be connected to outputs withou...IDTQS316233
Vendor:Other Category:Other
The QS316233 is a 32-bit to 16-bit high-speed CMOS, TTL-compatible switch which can multiplex or demultiplex data. IDTQS316233 can be used for memory interleaving where two memory banks need to be addressed simultane...IDTQS3162233
Vendor:Other Category:Other
The QS3162233 is a 32-bit to 16-bit high-speed CMOS, TTL-compatible switch which can multiplex or demultiplex data. IDTQS3162233 can be used for memory interleaving where two memory banks need to be addressed simultaniou...IDTQS316214
Vendor:Other Category:Other
The QS316214 provides a set of twelve high-speed CMOS TTLcompatible buses switching between three separate ports. The low ON resistance of the QS316214 allows inputs to be connected to outputs without adding propagation ...IDTQS316213
Vendor:Other Category:Other
The QS316213 provides a set of 24 high-speed CMOS TTL-compatible bus exchange switches. The low ON resistance of the QS316213 allows inputs to be connected to outputs without adding propagation delay and without generati...IDTQS316212
Vendor:Other Category:Other
The QS316212 provides a set of 24 high-speed CMOS TTL-compatible bus-exchange switches. The low ON resistance of the QS316212 allows inputs to be connected to outputs without adding propagation delay and without gener...IDTQS316211
Vendor:Other Category:Other
The QS316211 provides a set of 24 high-speed CMOS TTL-compatible bus switches. The low ON resistance of the QS316211 allows inputs to be connected to outputs without adding propagation delay and without gener-ating ad...IDTQS3126
Vendor:Other Category:Other
The QS3126 provides a set of four high-speed CMOS switches connect-ing inputs to outputs. The low ON resistance of the QS3126 allows inputs to be connected to outputs without propagation delay and without generating ad...IDTQS3125
Vendor:Other Category:Other
The QS3125 provides a set of four high-speed low resistance CMOS switches connecting inputs to outputs without propagation delay and without generating additional ground bounce noise. Individual enables ( OE) are used ...IDTET
Vendor:Other Category:Other
The 16-bit transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power transceiv- ers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enabl...IDTCV125
Vendor:Other Category:Other
IDTCV125 is a 56 pin clock device, incorporating both Intel CK410M and CKSSCD requirements, for Intel advance P4 processors. The CPU output buffer is designed to support up to 400MHz processor. This chip of IDTCV125 has ...IDTCV123
Mfg:IDT Pack:SSOP D/C:03+ Vendor:Other Category:Other
IDTCV123 is a 56 pin clock device. The CPU output buffer is designed to support up to 400MHz processor. This chip has three PLLs inside for CPU/ SRC/PCI, SATA, and 48MHz/DOT96 IO clocks. One dedicated PLL for Serial ATA ...IDTCV119E
Vendor:Other Category:Other
IDTCV119E is a 48 pin clock generation device for desktop PC platforms.This chip of IDTCV119E incorporates four PLLs to allow independent generation of CPU, AGP/ PCI, SRC, and 48MHz clocks. The dedicated PLL for Serial A...IDTCV115C
Vendor:Other Category:Other
IDTCV115C is a 56 pin clock device, complying the latest Intel CK410 requirements, for Intel advance P4 processors. The CPU output buffer is designed to support up to 400MHz processor. One dedicated PLL for Serial ATA cl...IDTCV110L
Vendor:Other Category:Other
IDTCV110L is a 56 pin clock device. The CPU output buffer is designed to support up to 400MHz processor. This chip of IDTCV110L has three PLLs inside for CPU/ SRC/PCI, SATA, and 48MHz/DOT96 IO clocks. One dedicated PLL f...IDTCV110J
Vendor:Other Category:Other
IDTCV110J is a 56 pin clock device. The CPU output buffer is designed to support up to 400MHz processor. This chip has three PLLs inside for CPU/SRC/PCI, SATA, and 48MHz/DOT96 IO clocks. One dedicated PLL for Serial AT...IDTCV109E
Vendor:Other Category:Other
IDTCV109E is a 48 pin clock generation device for desktop PC platforms. This chip of IDTCV109E incorporates four PLLs to allow independent generation of CPU, AGP/ PCI, SRC, and 48MHz clocks. The dedicated PLL for Serial...IDTCV107E
Vendor:Other Category:Other
IDTCV107E is a 48 pin clock generation device for desktop PC platforms. This chip of IDTCV107E incorporates four PLLs to allow independent generation of CPU, AGP/ PCI, SRC, and 48MHz clocks. The dedicated PLL for Serial ...IDTCV104B
Vendor:Other Category:Other
IDTCV104B is a 48 pin clock generation device for desktop PC platforms. This chip of IDTCV104B incorporates four PLLs to allow independent generation of CPU, AGP/ PCI, SRC, and 48MHz clocks. The dedicated PLL for Seria...IDTCT
Vendor:Other Category:Other
The 16-bit transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power transceiv- ers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enabl...IDTCSPUA877A
Vendor:Other Category:Other
The CSPUA877A is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedba...IDTCSPU877D
Vendor:Other Category:Other
The CSPU877D is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9] , Y [0:9]) and one differential pair of feedba...IDTCSPU877ABV
Vendor:Other Category:Other
The IDTCSPU877ABV is designed as a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair to 10 differential output pairs and one differential pair of feedback clock outpu...IDTCSPU877A
Vendor:Other Category:Other
The CSPU877A is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK</a> ) to 10 differential output pairs (Y [0:9]</a>,Y [0:9]) and one different...IDTCSPU877
Vendor:Other Category:Other
The CSPU877 is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedbac...IDTCSPT857D
Vendor:Other Category:Other
The CSPT857D is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedbac...IDTCSPT857C
Vendor:Other Category:Other
The CSPT857C is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedbac...IDTCSPT857A
Vendor:Other Category:Other
The CSPT857 is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK,CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedback ...IDTCSPT857/A
Vendor:Other Category:Other
The CSPT857 is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK, CLK</a> ) to 10 differential outputpairs (Y[0:9],Y [0:9]</a>) and one differential...IDTCSPT857
Vendor:Other Category:Other
The CSPT857 is a PLL based clock driver that acts as a zero delay buffer to distribute one differential clock input pair(CLK,CLK ) to 10 differential output pairs (Y [0:9], Y [0:9]) and one differential pair of feedback ...IDTCSPT855
Vendor:Other Category:Other
The CSPT855 is a high-performance, low-skew, low-jitter zero delay buffer that distributes one differential clock input pair(CLK, CLK ) to four differential output pairs (Y [0:3], Y [0:3]) and one differential pair of fe...IDTCSPF2510C
Vendor:Other Category:Other
The IDTCSPF2510C is a high performance, low-skew, low-phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, infrequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. It is specif...IDTCSP2510D
Vendor:Other Category:Other
The CSP2510D is a high performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. IDTCSP2510D uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input s...IDTCSP2510CPGG
Vendor:IDT, Integrated Device Technology Inc Category:Integrated Circuits (ICs)
IC CLK DVR ZD BUFFER PLL 24TSSOPThe CSP2510C is a high performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. ID...IDTCSP2510C
Vendor:Other Category:Other
The CSP2510C is a high performance, low-skew, low-jitter, phase-lock loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal. is...IDTAT
Vendor:Other Category:Other
The 16-bit transceivers are built using advanced dual metal CMOS technology. These high-speed, low-power transceiv- ers are ideal for synchronous communication between two busses (A and B). The Direction and Output Enabl...IDTAS4684
Vendor:Other Category:Other
The IDTAS4684 low on-resistance (RON), low voltage, dual single-pole/double-throw (SPDT) analog switch operates from a single +1.8 V to +5.5 V supply. The IDTAS4684 features a 0.5Ω (max) RON for its NC switch and a...IDTAS4624
Vendor:Other Category:Other
The IDTAS4624 low on-resistance (RON), low voltage, single-pole/double-throw (SPDT) analog switch operates from a single +1.8 V to +5.5 V supply. The IDTAS4624 features a 0.5Ω (max) RON for its NC switch and a 0.8&...IDTAMB0480
Vendor:Other Category:Other
The fully buffered dual in-line memory module (FB-DIMM)IDTAMB0480 is the next generation memory architecture to meet the growing memory requirement of servers and workstations. The IDT IDTAMB0480 Advanced Memory Buffer ...IDT88P8344
Vendor:Other Category:Other
The IDT88P8344 is a SPI (System Packet Interface) Exchange with four SPI- 3 interfaces and one SPI-4 interface. The data that enter on the low speed interface (SPI-3) are mapped to logical identifiers (LIDs) and enqueued...IDT8535-01
Vendor:Other Category:Other
The IDT8535-01 is a low skew, high performance 1-to-4 LVCMOS-to-3.3V LVPECL fanout buffer. IDT8535-01 has two single-ended clock inputs. The single-ended clock input accepts LVCMOS or LVTTL input levels and translates th...IDT85304-01
Vendor:Other Category:Other
3.3V LVPECL clock generator-divider. It has two selectable clock inputs. The CLK/ xCLK pair can accept most standard differential input levels. The PCLK/ xPCLK pair can accept LVPECL, CML, or SSTL input levels. The clock...IDT82V8313
Vendor:Other Category:Other
IDT82V3288
Vendor:Other Category:Other
The IDT82V3288 is an integrated, single-chip solution for the Synchronous Equipment Timing Source for Stratum 2, 3E, 3, SMC, 4E and 4 clocks in SONET / SDH equipments, DWDM and Wireless base station,such as GSM, 3G, DSL ...IDT82V3280
Vendor:Other Category:Other
The IDT82V3280 is an integrated, single-chip solution for the Synchronous Equipment Timing Source for Stratum 2, 3E, 3, SMC, 4E and 4 clocks in SONET / SDH equipments, DWDM and Wireless base station, such as GSM, 3G, DSL...IDT82V3255
Vendor:Other Category:Other
The IDT82V3255 is an integrated, single-chip solution for the Synchronous Equipment Timing Source for Stratum 3, SMC, 4E and 4 clocks in SONET / SDH equipments, DWDM and Wireless base station, such as GSM, 3G, DSL concen...IDT82V3155
Vendor:Other Category:Other
The IDT82V3155 is an enhanced T1/E1/OC3 WAN PLL with dual reference inputs. It contains a Digital Phase-Locked Loop (DPLL), which generates low jitter ST-BUS, 19.44 MHz and 155.52 MHz clock and framing signals that are p...IDT82V3012
Vendor:Other Category:Other
The lDT82V3012 can be used in synchronization and timing control for T1, E1 and OC3 systems, or used as ST-BUS clock and frame pulse source. IDT82V3012 also can be used in access switch, access routers, ATM edge switches...IDT82V3011
Vendor:Other Category:Other
The IDT82V3011 provides 9 types of clock signals (C1.5o, C3o, C6o, C2o, C4o, C8o, C16o, C19o, C32o) and 7 types of framing signals (F0o, F8o, F16o, F19o, F32o, RSP, TSP) for multitrunk T1/E1 and STS3/OC3 links. The IDT82...IDT82V3002APV
Mfg:IDT Pack:DIP/SOP D/C:08+ Vendor:Other Category:Other
The IDT82V3002A is a WAN PLL with dual reference inputs. It contains a Digital Phase-Locked Loop (DPLL), which generates ST-BUS clocks and framing signals that are phase locked to a 2.048 MHz, 1.544 MHz or 8 kHz input re...IDT82V3001A
Vendor:Other Category:Other
The IDT82V3001A is a WAN PLL with single reference input. It contains a Digital Phase-Locked Loop (DPLL), which generates ST-BUS clocks and framing signals that are phase locked to a 2.048 MHz, 1.544 MHz or 8 kHz input r...IDT82V2616
Vendor:Other Category:Other
The 16-port IDT82V2616 is a feature-rich device that provides the solution to implement IMA and UNI logical channels over T1 or E1 links in all public or private UNI, NNI and B-ICI applications. The IDT82V2616 is complia...IDT82V2604
Vendor:Other Category:Other
The 4-port IDT82V2604 is a feature-rich device that provides the solution to implement IMA and UNI logical channels over T1 or E1 links in all public or private UNI, NNI and B-ICI applications. The chip is compliant with...IDT82V2108
Vendor:Other Category:Other
The IDT82V2108 is a flexible feature-rich octal T1/E1/J1 Framer. Controlled by the software, the IDT82V2108 can be globally configured as an Octal E1 or T1/J1 Framer. When E1 or T1/J1 has been set globally, the operation...IDT82V2088
Vendor:Other Category:Other
The IDT82V2088 can be configured as an octal T1, octal E1 or octal J1 Line Interface Unit. In receive path, an Adaptive Equalizer is integrated to remove the distortion introduced by the cable attenuation. The IDT82V2088...IDT82V2084
Vendor:Other Category:Other
The IDT82V2084 can be configured as a quad T1, quad E1 or quad J1 Line Interface Unit. In receive path, an Adaptive Equalizer is integrated to remove the distortion introduced by the cable attenuation. The IDT82V2084 als...IDT82V2082
Vendor:Other Category:Other
The IDT82V2082 can be configured as a dual channel T1, E1 or J1 Line Interface Unit. In receive path, an Adaptive Equalizer is integrated to remove the distortion introduced by the cable attenuation. The IDT82V2082 also ...IDT82V2081
Vendor:Other Category:Other
The IDT82V2081 can be configured as a single channel T1, E1 or J1 Line Interface Unit. In receive path, an Adaptive Equalizer is integrated to remove the distortion introduced by the cable attenuation. The IDT82V2081 als...IDT82V2058
Pack:02+ Vendor:Other Category:Other
The IDT82V2058 is a single chip, 8-channel E1 short haul PCM transceiver with a reference clock of 2.048MHz. It contains 8 transmitters and 8 receivers.Both receivers and transmitters can be programmed to work either in ...IDT82V2048L
Vendor:Other Category:Other
IDT82V2048
Vendor:Other Category:Other
The IDT82V2048 is a single chip, 8-channel T1/E1 short haul PCM transceiver with a reference clock of 1.544MHz (T1) or 2.048MHz (E1). It contains 8 transmitters and 8 receivers.Both the receivers and transmitters can be ...IDT82V2041E
Vendor:Other Category:Other
The IDT82V2041E can be configured as a single channel T1, E1 or J1 Line Interface Unit. The IDT82V2041E performs clock/data recovery, AMI/ B8ZS/HDB3 line decoding and detects and reports the LOS conditions. An integrated...IDT82V1671AJ8
Vendor:Other Category:Other
The IDT82V1671AJ8 is one member of the IDT82V1671 family which is designed as the chipset of ringing subscriber that has some points of features such as (1)Off-hook and ground-key detection; (2)AC/DC ring trip detection;...IDT82V1671
Vendor:Other Category:Other
The RSLIC-CODEC chipset is comprised of one four-channel programmable PCM CODEC (IDT82V1074) and four single-channel ringing SLICs (IDT82V1671). The chipset of IDT82V1671 provides a total solution for line card designs. ...IDT82V1074PF
Vendor:Other Category:Other
The IDT82V1074PF is one member of the IDT82V1074 family which is designed as the chipset of ringing subscriber that has some points of features such as (1)Off-hook and ground-key detection; (2)AC/DC ring trip detection; ...IDT82V1074
Vendor:Other Category:Other
The RSLIC-CODEC chipset is comprised of one four-channel programmable PCM CODEC (IDT82V1074) and four single-channel ringing SLICs (IDT82V1671). The chipset of IDT82V1068 provides a total solution for line card designs. ...IDT82V1068
Vendor:Other Category:Other
The IDT82V1068 is a feature rich, single-chip, programmable 8 channel PCM CODEC with on-chip filters. Besides the A-Law/µ-Law companding and linear coding/decoding (16-bit 2ís complement), the IDT82V1068 provides 2...IDT82V1054A
Vendor:Other Category:Other
The IDT82V1054A is a feature rich, single-chip, programmable 4- channel PCM CODEC with on-chip filters. Besides the µ-Law/A-Law companding and linear coding/decoding (14 effective bits + 2 extra sign bits), the IDT...IDT82P2828
Vendor:Other Category:Other
The IDT82P2828 is a 28+1 channels high-density T1/E1/J1 short haul Line Interface Unit. Each channel of the IDT82P2828 can be independently configured. The configuration is performed through a Serial or Parallel Intel/Mo...IDT82P2288
Vendor:Other Category:Other
IDT82P2284
Vendor:Other Category:Other
IDT82P2282
Vendor:Other Category:Other
The IDT82P2282 is a highly featured single device solution for T1/ E1/J1 trunks. Each link of the IDT82P2282 can be independently configured.The configuration is performed through a SPI or parallel microprocessor interfa...IDT82P2281
Vendor:Other Category:Other
IDT821621J
Vendor:Other Category:Other
The IDT821621J is one member of the IDT821621 family,it is a long haul Subscriber Line Interface Circuit. IDT821621J implements the basic telephone line interface functions such as battery feeding,impedance matching,off-...IDT821621
Vendor:Other Category:Other
The IDT821621 is a long haul Subscriber Line Interface Circuit. It implements the basic telephone line interface functions such as battery feeding, impedance matching, off-hook detection and ring-trip detection.The IDT82...IDT821611
Vendor:Other Category:Other
The IDT821611 is a long haul Subscriber Line Interface Circuit. It implements the basic telephone line interface functions such as battery feeding, impedance matching, off-hook detection and ring-trip detection.The IDT82...IDT821068
Mfg:IDT Pack:QFP100 D/C:03+ Vendor:Other Category:Other
The IDT821068 is a feature rich, single-chip, programmable 8 channel PCM CODEC with on-chip filters. Besides the A-Law/m-Law companding and linear coding/decoding (16-bit 2's complement), IDT821068 provides 2 programmabl...IDT821064
Vendor:Other Category:Other
The IDT821064 is a feature rich, single-chip, programmable 4 chan-nel PCM CODEC with on-chip filters. Besides the m-Law/A-Law companding and linear coding/decoding (14 effective bits + 2 extra sign bits), IDT821064 als...IDT821054A
Vendor:Other Category:Other
The IDT821054A is a feature rich, single-chip, programmable 4- channel PCM CODEC with on-chip filters. Besides the -Law/A-Law companding and linear coding/decoding (14 effective bits + 2 extra sign bits), the IDT821054A ...IDT821054
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
The IDT821054 is a feature rich, single-chip, programmable 4-channel PCM CODEC with on-chip filters. Besides the P-Law/A-Law companding and linear coding/decoding (14 effective bits + 2 extra sign bits), the IDT821054 ...IDT821034
Mfg:IDT Pack:QFP D/C:07+ Vendor:Other Category:Other
The IDT821034 is a single-chip, four channel PCM CODEC with onchip filters and programmable gain setting. This device provides both m-Law and A-Law companding digital-to-analog and analog-to-digital conversions based on ...IDT821024
Mfg:MOT Pack:05+ Vendor:Other Category:Other
The IDT821024 is a single-chip, four channel PCM CODEC with onchip filters. The device provides analog-to-digital and digital-to-analog conversions and supports both a-law and m-law companding. The digital filters in IDT...IDT7MPV6256
Vendor:Other Category:Other
The IDT7MPV6253/55/56 modules belong to a family of secondary caches intended for use with PowerPC CPUbased systems. The IDT7MPV6253 uses IDT's 71V256 32K The IDT logo is a registered trademark of Integrated Device Techn...IDT7MPV6255
Vendor:Other Category:Other
The IDT7MPV6253/55/56 modules belong to a family of secondary caches intended for use with PowerPC CPUbased systems. The IDT7MPV6253 uses IDT's 71V256 32K The IDT logo is a registered trademark of Integrated Device Techn...IDT7MPV6253
Vendor:Other Category:Other
The IDT7MPV6253/55/56 modules belong to a family of secondary caches intended for use with PowerPC CPUbased systems. The IDT7MPV6253 uses IDT's 71V256 32K The IDT logo is a registered trademark of Integrated Device Techn...IDT7MP4145
Vendor:Other Category:Other
The IDT7MP4045/4145 is a 256K x 32 static RAM module constructed on an epoxy laminate (FR-4) substrate using 8256K x 4 static RAMs in plastic SOJ packages. Availability of four chip select lines (one for each group of tw...IDT7MP4120
Vendor:Other Category:Other
The IDT7MP4120 is a 1M x 32 Static RAM module constructed on an epoxy laminate (FR-4) substrate using 8 1M x 4 Static RAMs in plastic packages. Availability of four chip select lines (one for each group of two RAMs) prov...IDT7MP4095
Vendor:Other Category:Other
The IDT7MP4095/7MP4060 are 128K x 32 static RAM modules constructed on an epoxy laminate (FR-4) substrate using four 128K x 8 static RAMs in plastic SOJ packages. That are available with access times as fast as 15ns with...IDT7MP4060
Vendor:Other Category:Other
The IDT7MP4095/7MP4060 are 128K x 32 static RAM modules constructed on an epoxy laminate (FR-4) substrate using four 128K x 8 static RAMs in plastic SOJ packages. The IDT7MP4095/7MP4060 are available with access times as...