© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Mfg:TEXAS Pack:98 D/C:TSSOP Vendor:Other Category:Other
These SN74LV32A quadruple 2-input positive-OR gates are designed for 2-V to 5.5-V VCC operation.The 'LV32A devices perform the Boolean function Y = AB or Y = A • B in positive logic.
Pack:SSOP D/C:95+ Vendor:Other Category:Other
These quadruple 2-input positive-OR gates are designed for 2.7-V to 5.5-V VCC operation. The 'LV32 perform the Boolean function Y = A + B or Y =A ` B in positive logic. The SN74LV32 is packaged in TI's shrink small-outli...
Vendor:Other Category:Other
These triple 3-input positive-NOR gates are designed for 2-V to 5.5-V VCC operation.
The 'LV27A devices perform the Boolean function Y = A + B + C</a> or Y = A</a>• B</a>• C</a> in po...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC OCT EDG-TRG D-TYPE F-F 20SOICThe SN74LV273ADWE4 is one member of the SN74LV273A series.These devices are positive-edge-triggered flip-flops with direct clear (CLR) input. Information at the data (D) inputs meeting the setup time requirements is tran...
Mfg:TI Pack:SSOP-20 D/C:02+ Vendor:Other Category:Other
The 'LV273A devices are octal D-type flip-flops designed for 2-V to 5.5-V VCC operation. These devices are positive-edge-triggered flip-flops with direct clear (CLR) input. Information at the data (D) inputs meeting the ...
Vendor:Other Category:Other
These octal D-type flip-flops are designed for 2.7-V to 5.5-V VCC operation. The 'LV273 are positive-edge-triggered flip-flops with direct clear (CLR) input. Information at the data (D) inputs meeting the setup time requ...
Vendor:Other Category:Other
This octal bus transceiver is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.The SN74LV245AT allows data transmission from t...
Vendor:Other Category:Other
The SN74LV245APWLE is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-cont...
Mfg:HIT Pack:SOP D/C:99+ Vendor:Other Category:Other
These SN74LV245A octal bus transceivers are designed for 2-V to 5.5-V VCC operation.The SN74LV245A devices are designed for asynchronous communication between data buses. The device transmits data from the A bus to the B...
Mfg:TI D/C:07+ Vendor:Other Category:Other
These octal bus transceivers are designed for 2.7-V to 5.5-V VCC operation. The 'LV245 are designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B b...
Vendor:Other Category:Other
This SN74LV244AT octal buffer/driver is designed specifically to improve both the performance and density of 3-state memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.The SN74LV244AT is o...
Mfg:TI Pack:SSOP Vendor:Other Category:Other
These LV244A octal buffers/line drivers are designed for 2-V to 5.5-V VCC operation.The 'LV244A devices are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drive...
Mfg:TI Pack:SOP Vendor:Other Category:Other
These SN74LV244 octal buffers/line drivers are designed for 2.7-V to 5.5-V VCC operation. The 'LV244 are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers,...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUFF/DVR TRI-ST OCTAL 20SOPThe SN74LV240ANSRE4 devices are designed specifically to improve both the performance and desity of 3-state momory address drivers,clock drivers,and bus-oriented recivers and transmitters.These octal buffers/drivers are ...
Pack:98 D/C:SSOP Vendor:Other Category:Other
These octal buffers/drivers SN74LV240A are designed for 2-V to 5.5-V VCC operation. The 'LV240A devices are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drive...
Vendor:Other Category:Other
The 'LV221A devices are dual multivibrators designed for 2-V to 5.5-V VCC operation. Each multivibrator hasa negative-transition-triggered (A) input and a positive-transition-triggered (B) input, either of which can be u...
Vendor:Other Category:Other
These LV20A dual 4-input positive-NAND gates are designed for 2-V to 5.5-V VCC operation.The 'LV20A devices perform the Boolean function Y = A • B • C • D or Y = A + B + C + D in positive logic.These de...
Vendor:Other Category:Other
The SN74LV175A devices are quadruple D-type flip-flops designed for 2-V to 5.5-V VCC operation.These devices SN74LV175A have a direct clear (CLR) input and feature complementary outputs from each flip-flop.SN74LV175A Inf...
Vendor:Other Category:Other
The SN74LV174PWLE is designed for 2.7-V to 5.5-V VCC operation. It is available in TI's shrink small-outline package (DB), which provides the same I/O pin count and functionality of standard small-outline packages in les...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC HEX D-TYPE F-F W/CLR 16-SOPThe 'LV174A devices are hex D-type flip-flops designed for 2-V to 5.5-V VCC operation. These devices are positive-edge-triggered flip-flops with a direct clear (CLR) input.LV174A Information at the data (D) inputs meetin...
Mfg:TI D/C:2005 Vendor:Texas Instruments (VA) Category:Integrated Circuits (ICs)
IC HEX D-TYPE F-F W/CLR 16-SOICThe 'LV174A devices are hex D-type flip-flops designed for 2-V to 5.5-V VCC operation. These devices are positive-edge-triggered flip-flops with a direct clear (CLR) input.LV174A Information at the data (D) inputs meetin...
Vendor:Other Category:Other
The 'LV174A devices are hex D-type flip-flops designed for 2-V to 5.5-V VCC operation. These devices are positive-edge-triggered flip-flops with a direct clear (CLR) input.LV174A Information at the data (D) inputs meetin...
Mfg:TI Pack:SOP D/C:99+ Vendor:Other Category:Other
The 'LV174A devices are hex D-type flip-flops designed for 2-V to 5.5-V VCC operation.These devices LV174A are monolithic positive-edge- triggered flip-flops with a direct clear (CLR) input. Information at the data (D) ...
Pack:00+ D/C:SOP Vendor:Other Category:Other
These SN74LV174 hex D-type flip-flops are designed for 2.7-V to 5.5-V VCC operation. The 'LV174 are monolithic positive-edgetriggered flip-flops with a direct clear (CLR) input. Information at the data (D) inputs meeting...
Vendor:Other Category:Other
The 'LV166A devices are 8-bit parallel-load shift registers, designed for 2-V to 5.5-V VCC operation.The 'LV166A parallel-in or serial-in, serial-out registers feature gated clock (CLK, CLK INH) inputs and anoverriding c...
Vendor:Other Category:Other
The SN74LV165PWLE parallel-load, 8-bit shift registers aredesigned for 2.7-V to 5.5-V VCC operation. The features of SN74LV165PWLE are: (1)ESD Protection Exceeds 2000 V Per MIL-STD-883C, Method 3015; Exceeds 200 V Using ...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC REGISTR PAR-LOAD 8BIT 16TSSOPThe SN74LV165APWG4 is parallel-load, 8-bit shift registers designed for 2-V to 5.5-V VCC operation. The features of the SN74LV165APWG4 are: (1)2-V to 5.5-V VCC Operation; (2)Max tpd of 10.5 ns at 5 V; (3)Support Mixed-Mo...
Pack:98+ D/C:SOP-16 Vendor:Other Category:Other
The 'LV165A devices are parallel-load, 8-bit shift registers designed for 2-V to 5.5-V VCC operation.When the devices LV165A are clocked, data is shifted toward the serial output QH. Parallel-in access to each stage is p...
Vendor:Other Category:Other
The 'LV165 parallel-load, 8-bit shift registers aredesigned for 2.7-V to 5.5-V VCC operation.When the device LV165 is clocked, data is shifted towardthe serial output QH. Parallel-in access to eachstage is provided by ei...
Mfg:TI Pack:SSOP14 D/C:07+ Vendor:Other Category:Other
The 'LV164A devices are 8-bit parallel-out serial shift registers designed for 2-V to 5.5-V VCC operation.These devices LV164A feature AND-gated serial (A and B) inputs and an asynchronous clear (CLR) input. The gated se...
Vendor:Other Category:Other
These SN74LV164 8-bit parallel-out serial shift registers are designed for 2.7-V to 5.5-V VCC operation. The 'LV164 feature AND-gated serial (A and B) inputs and an asynchronous clear (CLR) input. The gated serial inputs...
Vendor:Other Category:Other
The 'LV163A devices are 4-bit synchronous binary counters designed for 2-V to 5.5-V VCC operation. These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting desig...
Vendor:Other Category:Other
The SN74LV161A devices are 4-bit synchronous binary counters designed for 2-V to 5.5-V VCC operation. These synchronous, presettable counters feature an internal carry look-ahead for application in high-speed counting de...
Mfg:TI Pack:SSOP48 D/C:00+ Vendor:Other Category:Other
The SN74LV161284 is designed for 4.5-V to 5.5-V VCC operation. This device provides asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
This...
Vendor:Other Category:Other
The 'LV157A devices are quadruple 2-line to 1-line data selectors/multiplexers designed for 2-V to 5.5-V VCC operation.
These devices LV157A contain inverters and drivers to supply full data selection to the four outpu...
Mfg:TEXAS Pack:98 D/C:TSSOP Vendor:Other Category:Other
These hex Schmitt-trigger inverters LV14A are designed for 2-V to 5.5-V VCC operation.The 'LV14A devices contain six independent inverters. These devices perform the Boolean function Y = A.
Mfg:TI Vendor:Other Category:Other
These SN74LV14 hex Schmitt-trigger inverters are designed for 2.7-V to 5.5-V VCC operation. The 'LV14 devices contain six independent inverters. These devices perform the Boolean function Y = A. The SN54LV14 is character...
Mfg:TI Pack:SSOP D/C:99+ Vendor:Other Category:Other
The 'LV139A devices are dual 2-line to 4-line decoders/demultiplexers designed for 2-V to 5.5-V VCC operation.These devices LV139A are designed for high-performance memory-decoding or data-routing applications requiring ...
Vendor:Other Category:Other
These devices SN74LV138A are designed for high-performance memory-decoding or data-routing applications requiring very short propagation delay times. In high-performance memory systems, these decoders can be used to mini...
Mfg:TI D/C:96 Vendor:Other Category:Other
These 3-line to 8-line decoders/demultiplexers SN74LV138 are designed for 2.7-V to 5.5-V VCC operation. The 'LV138 are designed for high-performance memory-decoding or data-routing applications requiring very short propa...
Mfg:319 Pack:TI Vendor:Other Category:Other
The 'LV132A devices are quadruple positive-NAND gates designed for 2-V to 5.5-V VCC operation.The 'LV132A devices perform the Boolean function Y = A • B or Y = A + B in positive logic.Each circuit functions LV132A ...
Vendor:Other Category:Other
These quadruple bus buffer gates LV126A are designed for 2-V to 5.5-V VCC operation.The 'LV126A devices feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE...
Mfg:5000 Pack:QFN D/C:05+pb Vendor:Texas Instruments (VA) Category:Integrated Circuits (ICs)
IC BUS BUFF TRI-ST QD 14VQFNThe 'LV125A quadruple bus buffer gates are designed for 2-V to 5.5-V VCC operation.These devices LV125A feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUS BUFF TRI-ST QD 14STSSOPThe SN74LV125APWG4 is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down. The feat...
Mfg:SOP14 Pack:1780 D/C:TI Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUS BUFF TRI-ST QD 14SOPThe 'LV125A quadruple bus buffer gates are designed for 2-V to 5.5-V VCC operation.These devices LV125A feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUS BUFF TRI-ST QD 14DIP
Mfg:TI Pack:SMD D/C:08+ Vendor:Other Category:Other
The 'LV125A quadruple bus buffer gates are designed for 2-V to 5.5-V VCC operation.These devices LV125A feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE...
Vendor:Other Category:Other
These quadruple bus buffer gates LV125 are designed for 2.7-V to 5.5-V VCC operation.The 'LV125 feature independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input ...
Mfg:TI Pack:SSOP16 D/C:04+ Vendor:Other Category:Other
The 'LV123A devices are dual retriggerable monostable multivibrators designed for 2-V to 5.5-V VCC operation.
These edge-triggered multivibrators LV123A feature output pulse-duration control by three methods. In the fir...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC TRPL 3IN POS-NAND GATE 14-SOPThe SN74LV10ANSRE4 devices perform the boolean function Y=A`B`C or Y=A+B+C in positive logic.These triple 3-input positive-NAND gates are designed for 2-V to 5.5-V VCC operation.The SN74LV10ANSRE4 are fully specified for...
Mfg:TI Pack:SOP-14P D/C:02+ Vendor:Other Category:Other
Mfg:TI Pack:SMD Vendor:Other Category:Other
These quadruple 2-input positive-AND gates SN74LV08A are designed for 2-V to 5.5-V VCCoperation. The 'LV08A device perform the Boolean function Y=AB or Y=A+B in positive logic.These devices SN74LV08A are fully specified...
Mfg:TI Pack:TSSOP Vendor:Other Category:Other
These quadruple 2-input positive-AND gates SN74LV08 are designed for 2.7-V to 5.5-V VCC operation. The 'LV08 perform Boolean function Y = A • B or Y = A + B in positive logic.The SN74LV08 is available in TI's shrin...
Mfg:TI Pack:SOP14 D/C:06+ Vendor:Other Category:Other
These hex buffers/drivers LV07A are designed for 2-V to 5.5-V VCC operation.
The 'LV07A devices perform the Boolean function Y = A in positive logic.
The LV07A open-drain outputs require pullup resistors to perform c...
Mfg:TI Vendor:Texas Instruments (VA) Category:Integrated Circuits (ICs)
IC INVERTER HEX 1INPUT 14SSOPThese hex inverter buffers/drivers SN74LV06ADBR are designed for 2-V to 5.5-V VCC operation.The 'LV06A devices perform the Boolean functionY = A in positive logic.The SN74LV06ADBR open-drain outputs require pullup resis...
Mfg:TI Pack:SOP D/C:04+ Vendor:Other Category:Other
These hex inverter buffers/drivers SN74LV06A are designed for 2-V to 5.5-V VCC operation.The 'LV06A devices perform the Boolean functionY = A in positive logic.The SN74LV06A open-drain outputs require pullup resistors t...
Vendor:Other Category:Other
The 'LV05A devices contain six independent inverters designed for 2-V to 5.5-V VCC operation. These devices perform the Boolean function Y = A.The LV05A open-drain outputs require pullup resistors to perform correctly an...
Mfg:TEXAS Pack:98 D/C:TSSOP Vendor:Other Category:Other
These SN74LV04A hex inverters are designed for 2-V to 5.5-V VCC operation. The 'LV04A devices contain six independent inverters. These devices perform the Boolean function Y = A.These devices SN74LV04A are fully specifi...
Mfg:HIT Pack:SOP D/C:99+ Vendor:Other Category:Other
These hex inverters are designed for 2.7-V to 5.5-V VCC operation. The 'LV04 contain six independent inverters. These devices perform the Boolean function Y =A.The SN74LV04 is available in TI's shrink small-outline packa...
Mfg:166 Pack:TI Vendor:Other Category:Other
The 'LV02A devices are quadruple 2-input positive-NOR gates designed for 2-V to 5.5-V VCC operation.The 'LV02A devices perform the Boolean function Y = A + B or Y = A • B in positive logic.These devices are fully s...
Mfg:SOP-14P Pack:TI D/C:2004+ Vendor:Other Category:Other
These quadruple 2-input positive-NOR gates are designed for 2.7-V to 5.5-V VCC operation. The 'LV02 perform Boolean function Y = A + B or Y = A • B in positive logic. The SN74LV02 is available in TI's shrink small-...
Mfg:TEXAS Pack:98 D/C:TSSOP Vendor:Other Category:Other
These quadruple 2-input positive-NAND gates are designed for 2-V to 5.5-V VCCoperation.The 'LV00A devices perform the Boolean function Y =A •B or Y = A + B in positive logic.
Pack:98+ D/C:SSOP Vendor:Other Category:Other
These quadruple 2-input positive-NAND gates are designed for 2.7-V to 5.5-V VCC operation. The 'LV00 perform the Boolean function Y = A • B or Y = A + B in positive logic. The SN74LV00 is available in TI's shrink s...
Vendor:Other Category:Other
The TTL/MSI SN74LS251 is a high speed 8-Input Digital Multiplexer. It provides, in one package, the ability to select one bit of data from up to eight sources. The LS251 can be used as a universal function generator to g...
Vendor:Other Category:Other
The SN54/74LS245 is an Octal Bus Transmitter/Receiver designed for 8-line asynchronous 2-way data communication between data buses. Direction Input (DR) controls transmission of Data from bus A to bus B or bus B to bus A...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The '221 and 'LS221 devices are dual multivibrators with performance characteristics virtually identical to those of the '121 devices. Each multivibrator features a negative-transitiontriggered input and a positive-trans...
Vendor:Other Category:Other
The SN74LS86N is designed as quad 2-input exclusive OR gate which would be low power schottky.Some guaranteed operating ranges of SN74LS86N have been concluded into several points as follow. (1)Its supply voltage range w...
Vendor:Other Category:Other
The SN74LS86 is designed as quad 2-input exclusive OR gate which would be low power schottky.SN74LS86 Some guaranteed operating ranges have been concluded into several points as follow. (1)Its supply voltage range would ...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC COMPARATOR MAGNITUDE 4B 16DIPThe SN74LS85N is designed as a 4-bit magnitude camparator which compares two 4-bit words (A, B), each word having four parallel inputs (A0A3, B0B3) A3, B3 being the most significant inputs.SN74LS85N has three features. (...
Vendor:Other Category:Other
The SN74LS83A is designed as a high-speed 4-bit binary full adder with internal carry lookahead. It accepts two 4-bit binary words (A1A4, B1B4) and a carry input (C0).Some guaranteed operating ranges of SN74LS83A have be...
Vendor:Other Category:Other
The SN74LS76A is designed as dual JK flip-flop with set and clear. It offers individual J, K, clock pulse, direct set and direct clear inputs. This dual flip-flop is designed so that when the clock goes HIGH, the inputs ...
Vendor:Other Category:Other
The SN74LS75 is designed as 4-bit D latch which is used as temporary storage for binary information between processing units and input/ output or indicator units. Information present at a data (D) input is transferred to...
Vendor:Other Category:Other
The SN74LS73A is designed as dual JK negative edge-triggered flip-flop which offers individual J, K, clear, and clock inputs. These dual flip-flops are designed so that when the clock goes high, the inputs are enabled an...
Vendor:Other Category:Other
The SN74LS689DW perform comparisons of two eight-bit binary or BCD words.All types provide P=Q outputs and the SN74LS689DW have totem-pole outputs,while the SN74LS689DW have open-collector outputs.The SN74LS689DW feature...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC COMPARATOR IDENTITY 8B 20DIPThe SN74LS688N is one kind of 8-bit,16 pin DIP magnitude comparators which designed to perform comparisons between two eight-bit binary or BCD words.It has a 20 kW pullup resistor on the Q inputs for analog or switch dat...
Vendor:Other Category:Other
The SN74LS685 is designed as one kind of 8-bit magnitude / identity comparator device that has some points of features:(1)compares two 8-bit words;(2)choice of totem-pole or open-collector outputs;(3)hysteresis at P and ...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC COMPARATOR MAGNITUDE 8B 20DIPThe SN74LS682N is designed as 8-bit magnitude comparator. This device is designed to perform comparisons between two eight-bit binary or BCD words. All device types provide P=Q outputs and have P>Q outputs also.Some g...
Vendor:Other Category:Other
The SN74LS682 is designed as 8-bit magnitude comparator. This device is designed to perform comparisons between two eight-bit binary or BCD words. All device types provide P=Q outputs and have P>Q outputs also.Some gu...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC 16BIT SERIAL SHIFT REG 24SOICThe SN74LS673DWE4 is one member of the SN74LS673 series.The 'LS673 is a 16-bit shift register and a 16-bit storage register in a single 24-pin package.A three-state input/output (SER/Q15) port to the shift register a...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC 4X4 REG FILE TRI-ST 16-DIPThe SN74LS670N is designed as a high-speed, low-power 4 x 4 register file organized as four words by four bits. Separate read and write inputs, both address and enable, allow simultaneous read and write operation.SN74LS6...
Vendor:Other Category:Other
Vendor:Other Category:Other
The SN54LS253 consists of bus transceiver circuits, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the data bus or from the internal storage registers. The feature of...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUS TRANSCVR OCTAL 20DIPThe SN74LS640N is designed as octal bus transceiver for asynchronous two-way communication between data buses. Control function implementation minimizes external timing requirements. These circuits allow data transmissio...
Vendor:Other Category:Other
The SN74LS640 is designed as octal bus transceiver for asynchronous two-way communication between data buses. Control function implementation minimizes external timing requirements. These circuits allow data transmission...
Vendor:Other Category:Other
The SN74LS638 is a octal bus transceiver.These octal bus transceivers are designed for asynchronous two-way communication between open-collector and 3state buses. The devices transmit data from the A bus (open-collect...
Vendor:Other Category:Other
The SN74LS620 is a type of octal bus transceiver, which is designed for asynchronous two-way communication betw een data buses. The control function implementation accepts for maximum flexibility in timing. The SN74LS6...
Vendor:Other Category:Other
The SN74LS600A memroy refresh controller contains one 8-bit synchronous counter, nine 3-state buffer drivers, four RC-controlled multivibrators, and other control circuitry on a single monolithic chip.It is designed to p...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC SERIAL-IN SHIFT-REG 16-SOPThe SN74LS595NSRE4 contain an 8-bit serial-in,parallel-out shift register that feeds an 8-bit D-type storage register.Both the shift register and storage register clocks are positive-edge triggered.
Features of the SN7...
Vendor:Other Category:Other
The SN74LS593 belongs to 'LS593 family. And the 'LS592 comes in a 16-pin package and consists of a parallel input, 8-bit storage register feeding an 8-bit binary counter. Both the register and the counter have individual...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC 8BIT BIN COUNT W/REG 16-SOPThe SN74LS592NSRE4 comes in a 16-pin package and consists of a parallel input,8-bit storage resister feeding an 8-bit binary counter.Both the register and the counter have individual positive-edge-triggered clocks.In add...
Vendor:Other Category:Other
The SN74LS592 comes in a 16-pin package and consists of a parallel input, 8-bit storage register feeding an 8-bit binary counter. The features of SN74LS592 are as follows: (1)parallel register inputs; (2)counter has dire...
Vendor:Other Category:Other
The SN74ALS879A is designed specifically for bus driving. The features of SN74ALS879A are as follows: (1)3-state bus driving outputs; (2)full parallel-access for loading; (3)buffered control inputs; (4)true outputs; (5)s...
Vendor:Other Category:Other
The SN74LS569A is designed as an programmable up/down BCD and Binary counters respectively. These devices have 3-state outputs for use in bus organized systems. With the exception of output enable (OE) and asynchronous c...
Vendor:Other Category:Other
The SN74LS55 is designed as 2-wide 4-input and-or-invert gate which would be low power schottky type.Some guaranteed operating ranges of SN74LS55 have been concluded into several points as follow. (1)Its supply voltage r...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC BUFF/DVR TRI-ST OCTAL 20DIPThe SN74LS541N is designed as an octal buffer and line driver with the same functions as the LS241, but with pinouts on the opposite side of the package. This device type is designed to be used as a memory address driver...
Vendor:Other Category:Other
The SN74LS54 is designed as 3-2-2-3-input and-or-invert gate which would be low power schottky type.Some guaranteed operating ranges of SN74LS54 have been concluded into several points as follow. (1)Its supply voltage ra...
Vendor:Other Category:Other
The SN74LS51 is designed as dual 2-wide 2 input/ 3-input and-or-invert gate which would be low power schottky type.Some guaranteed operating ranges of SN74LS51 have been concluded into several points as follow. (1)Its su...
Vendor:Other Category:Other
The SN74LS490 is designed as dual decade counter which would be low power schottky type. It contains a pair of high-speed 4-stage ripple counters. Each half of this device has individual clock, master reset and master se...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.