© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
This SN74ALVCH16409 9-bit, 4-port universal bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16409 allows synchronous data exchange between four different buses. Data flow is controlled by the sel...
Mfg:TI Pack:SSOP D/C:08+ Vendor:Other Category:Other
This SN74ALVCH16374 16-bit edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers...
Vendor:Other Category:Other
This SN74ALVCH16373 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16373 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and ...
Mfg:TI Vendor:Other Category:Other
This SN74ALVCH16344 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16344 is used in applications in which four separate memory locations must be addressed by a single...
Vendor:Other Category:Other
This SN74ALVCH16334 16-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data flow from A to Y is controlled by the output-enable (OE) input. The SN74ALVCH16334 device operates in the tra...
Vendor:Other Category:Other
This SN74ALVCH162841 20-bit bus-interface D-type latch is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162841 features 3-state outputs designed specifically for driving highly capacitive or relatively low-impe...
Vendor:Other Category:Other
This SN74ALVCH162836 20-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.
Data flow from A to Y is controlled by the output-enable (OE) input. The SN74ALVCH162836 device operates in the transparen...
Vendor:Other Category:Other
This SN74ALVCH162835 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.Data flow from A to Y is controlled by the output-enable (OE) input. The SN74ALVCH162835 device operates in the transparent m...
Vendor:Other Category:Other
This 1-bit to 4-bit address register/driver is designed for 1.65-V to 3.6-V VCC operation. This SN74ALVCH162832 is ideal for use in applications in which a single address bus is driving four separate memory locations. Th...
Pack:98 D/C:SSOP Vendor:Other Category:Other
This 1-bit to 4-bit address register/driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH162831 is ideal for use in applications in which a single address bus is driving four separate memory locations. The...
Mfg:TEXAS Pack:1998 D/C:TSSOP Vendor:Other Category:Other
This SN74ALVCH162830 1-bit to 2-bit address driver is designed for 1.65-V to 3.6-V VCC operation.Active bus-hold circuitry is provided to hold unused or floating inputs at a valid logic level. The outputs, which are des...
Mfg:TI D/C:02 Vendor:Other Category:Other
This SN74ALVCH162827 20-bit noninverting buffer/driver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162827 is composed of two 10-bit sections with separate output-enable signals. For either 10-bit buffer se...
Vendor:Other Category:Other
Vendor:Other Category:Other
The SN74ALVCH16282 is an 18-bit to 36-bit registered bus exchanger designed for 1.65-V to 3.6-V VCC operation.This SN74ALVCH16282 is intended for use in applications in which data must be transferred from a narrow high-s...
Mfg:TI Pack:01+ D/C:TSSOP56 Vendor:Other Category:Other
This SN74ALVCH162721 20-bit flip-flop is designed for low-voltage 1.65-V to 3.6-V VCC operation.The 20 flip-flops of the SN74ALVCH162721 are edge-triggered D-type flip-flops with qualified clock storage. On the positive ...
Mfg:TI Vendor:Other Category:Other
This SN74ALVCH16271 12-bit to 24-bit bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16271 is intended for applications in which two separate data paths must be multiplexed onto, or demultiplexed...
Vendor:Other Category:Other
This SN74ALVCH16270 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16270 is used in applications in which data must be transferred from a narrow high-speed bus to a w...
Mfg:TI Pack:SSOP D/C:99+ Vendor:Other Category:Other
This 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16269 is used in applications in which two separate ports must be multiplexed onto, or demultiplexed from, a singl...
Vendor:Texas Instruments (VA) Category:Integrated Circuits (ICs)
IC UNIV BUS TXRX 18BIT 56TSSOPThe SN74ALVCH162601GR is designed as one kind of 18-bit universal bus transceiver that combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, and clock-enabled modes. For A-to-...
Mfg:TI Pack:SSOP Vendor:Other Category:Other
This SN74ALVCH162601 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, clocked, a...
Mfg:TEXAS Pack:98 D/C:TSSOP Vendor:Other Category:Other
This SN74ALVCH16260 12-bit to 24-bit multiplexed D-type latch is designed for 1.65-V to 3.6-VCC operation.The SN74ALVCH16260 is used in applications in which two separate data paths must be multiplexed onto, or demultipl...
Vendor:Other Category:Other
This SN74ALVCH162525 18-bit universal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.Data of SN74ALVCH162525 flow in each direction is controlled by output-enable (OEAB and OEBA) and clock-enable (CLKENAB...
Vendor:Other Category:Other
This SN74ALVCH16245 16-bit (dual-octal) noninverting bus transceiver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH16245 is designed for asynchronous communication between data buses. The control-function im...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
This SN74ALVCH16244 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH16244 is designed specifically to improve the performance and density of 3-state memory address drivers, clo...
Vendor:Other Category:Other
This SN74ALVCH162409 9-bit, 4-port universal bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162409 allows synchronous data exchange between four different buses. Data flow is controlled by the s...
Vendor:Other Category:Other
This SN74ALVCH16240 16-bit buffer/driver is designed for 1.65-V to 3.6-V V operation. CCThe SN74ALVCH16240 is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers...
Mfg:TI D/C:98 Vendor:Other Category:Other
This SN74ALVCH162374 16-bit edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drive...
Vendor:Other Category:Other
This SN74ALVCH162373 16-bit transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162373 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and...
Vendor:Other Category:Other
This SN74ALVCH162344 1-bit to 4-bit address driver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVCH162344 is used in applications in which four separate memory locations must be addressed by a sing...
Pack:98 D/C:SSOP Vendor:Other Category:Other
This SN74ALVCH162334 16-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data of SN74ALVCH162334 flow from A to Y is controlled by the output-enable (OE) input. The device operates in ...
Mfg:TI Pack:SSOP-56 D/C:08+ Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC RGSTRD BUS EXCHANGER 56SSOPThis SN74ALVCH162268 12-bit to 24-bit registered bus exchanger is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVCH162268 is used for applications in which data must be transferred from a narrow high-speed bus to...
Pack:00+ D/C:SSOP Vendor:Other Category:Other
This SN74ALVCH162260 12-bit to 24-bit multiplexed D-type latch is designed for 1.65-V to 3.6-VCC operation.The SN74ALVCH162260 is used in applications in which two separate data paths must be multiplexed onto, or demulti...
Mfg:TI Pack:SSOP/48 Vendor:Other Category:Other
This SN74ALVCH162244 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVCH162244 is designed specifically to improve the performance and density of 3-state memory address drivers,...
Vendor:Other Category:Other
This SN74ALVCF162835 18-bit universal bus driver is designed for 2.3-V to 3.6-V VCC operation.Data of SN74ALVCF162835 flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparen...
Vendor:Other Category:Other
A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN74ALVC7814 is an 18-bit FIFO with high speed and fast access times. Data is processed at rate...
Vendor:Other Category:Other
The SN74ALVC7813 is suited for buffering asynchronous data paths up to 50-MHz clock rates and 13-ns access times. This device is designed for 3-V to 3.6-V VCC operation. Two devices can be configured for bidirectional da...
Vendor:Other Category:Other
A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN74ALVC7806 is an 18-bit FIFO with high speed and fast access times. Data is processed at rate...
Vendor:Other Category:Other
The SN74ALVC7805 is suited for buffering asynchronous data paths up to 50-MHz clock rates and 13-ns access times. This device is designed for 3-V to 3.6-V VCC operation. Two devices can be configured for bidirectional da...
Vendor:Other Category:Other
A FIFO memory is a storage device that allows data to be written into and read from its array at independent data rates. The SN74ALVC7804 is an 18-bit FIFO with high speed and fast access times. Data is processed at rate...
Vendor:Other Category:Other
The SN74ALVC7803 FIFO is suited for buffering asynchronous data paths at 50-MHz clock rates and 13-ns access times and is designed for 3-V to 3.6-V VCC operation. The 56-pin shrink smalloutline (DL) package offers greatl...
Vendor:Other Category:Other
This SN74ALVC74 dual positive-edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of th...
Vendor:Other Category:Other
The SN74ALVC3651 is a high-speed, low-power, CMOS, synchronous FIFO memory that supports clock frequencies up to 100 MHz and has read access times as fast as 6.5 ns. The 2048 * 36 dual-port SRAM FIFO buffers data from po...
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC GATE POS-OR QUAD 2IN 14-SOICThe SN74ALVC32D performs the boolean function Y=A`B or Y=A+B in positive logic.This quadruple 2-input positive-OR gate is designed for 1.65-V to 3.6-V Vcc operation.
Features of the SN74ALVC32D are:(1)operates from 1.65...
Vendor:Other Category:Other
The SN74ALVC32 devices are quadruple 2-input positive-AND gates. These SN74ALVC32 devices perform the Boolean function Y = A+B or Y = A • B in positive logic.
Vendor:Other Category:Other
The SN74ALVC245DGV is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-contro...
Vendor:Other Category:Other
This SN74ALVC245 octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation. The SN74ALVC245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus o...
Vendor:Other Category:Other
The SN74ALVC244DGV is organized as two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-i...
Vendor:Other Category:Other
This octal buffer/line driver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC244 is organized as two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the ...
Vendor:Other Category:Other
This 18-bit (dual-octal) noninverting registered transceiver is designed for 2.7-V to 3.6-V VCC operation.The SN74ALVC16901 is a dual 9-bit to dual 9-bit parity transceiver with registers. The device can operate as a fee...
Pack:98 D/C:SSOP Vendor:Other Category:Other
This SN74ALVC16835 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode when the latc...
Vendor:Other Category:Other
This SN74ALVC16834 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode wh...
Vendor:Other Category:Other
This SN74ALVC16820 10-bit flip-flop is designed specifically for low-voltage (3.3-V) VCC operation.The flip-flops of the SN74ALVC16820 edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input...
Vendor:Other Category:Other
This SN74ALVC16721 20-bit flip-flop is designed specifically for low-voltage (3.3-V) VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.The SN74ALVC16721's 20 flip-flops are edgetriggered D-type flip-flops with ...
Vendor:Other Category:Other
This 18-bit universal bus transceiver is designed for 2.7-V to 3.6-V VCC operation.The SN74ALVC16600 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked modes.Data flow i...
Vendor:Other Category:Other
The SN74ALVC16501 18-bit universal bus transceiver is designed for low-voltage (3.3-V) VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.Data flow in each direction is controlled by output-enable (OEAB and OEBA)...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC TRANSCVR TRI-ST 16BIT 48SSOPThe SN74ALVC164245DL is designed as 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails for asynchronous communication between data buses. To ensure the high-impedance state of SN74ALVC164...
Mfg:TI Pack:SMD D/C:08+ Vendor:Other Category:Other
This SN74ALVC164245 16-bit (dual-octal) noninverting bus transceiver contains two separate supply rails. B port has VCCB, which is set to operate at 3.3 V and 5 V. A port has VCCA, which is set to operate at 2.5 V and 3....
Vendor:Other Category:Other
The SN74ALVC16409 allows synchronous data exchange between four different buses.Data flow is controlled by the select (SEL0SEL4) inputs. A data-flow state is stored on the rising edge of the clock (CLK) input if the sele...
Vendor:Other Category:Other
This SN74ALVC16374 16-bit edge-triggered D-type flip-flop is designed for 3.3-V VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.
The SN74ALVC16374 is particularly suitable for implementing buffer registers, I...
Vendor:Other Category:Other
This SN74ALVC16373 16-bit transparent D-type latch is designed for 3.3-V VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.The SN74ALVC16373 is particularly suitable for implementing buffer registers, I/O ports,...
Pack:98+ D/C:SSOP Vendor:Other Category:Other
This SN74ALVC16334 16-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode...
Mfg:TI Vendor:Other Category:Other
This SN74ALVC162836 20-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.
Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode when the l...
Pack:97 D/C:SSOP Vendor:Other Category:Other
This SN74ALVC162835 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation.Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode when the latc...
Vendor:Other Category:Other
This SN74ALVC162834 18-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data flow from A to Y is controlled by the output-enable (OE) input. The device operates in the transparent mode w...
Vendor:Other Category:Other
This SN74ALVC162831 1-bit to 4-bit address register/driver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC162831 is ideal for use in applications in which a single address bus is driving four separate memory l...
Vendor:Other Category:Other
The SN74ALVC16270 is designed as a 12-bit to 24-bit registered bus exchanger, which is intended for use in applications where data must be transferred from a narrow high-speed bus to a wide lower-frequency bus. SN74ALVC1...
Vendor:Other Category:Other
The SN74ALVC16269 is a 12-bit to 24-bit registered bus transceiver, which is intended for applications where two separate ports must be multiplexed onto, or demultiplexed from, a single port. The device is particularly s...
Vendor:Other Category:Other
This SN74ALVC162601 18-bit universal bus transceiver is designed for 2.7-V to 3.6-V VCC operation.The SN74ALVC162601 combines D-type latches and D-type flip-flops to allow data flow in transparent, latched, and clocked m...
Vendor:Other Category:Other
The SN74ALVC16260 is a 12-bit to 24-bit multiplexed D-type latch used in applications where two separate data paths must be multiplexed onto, or demultiplexed from, a single data path. Typical applications include multip...
Pack:QG48 D/C:1000 Vendor:Other Category:Other
The SN74ALVC16245 16-bit (dual-octal) noninverting bus transceiver is designed for 2.3-V to 3.6-V VCC operation; it is tested at 2.5-V, 2.7-V, and 3.3-V VCC.The SN74ALVC16245 is designed for asynchronous communication be...
Mfg:TI Pack:SMD D/C:08+ Vendor:Other Category:Other
This SN74ALVC16244A 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC16244A is designed specifically to improve the performance and density of 3-state memory-address drivers, clock drivers, ...
Vendor:Other Category:Other
This SN74ALVC16240 16-bit buffer/driver is designed for 2.7-V to 3.6-V VCC operation.The SN74ALVC16240 is designed specifically to improve both the performance and density of 3-state memory address drivers, clock driver...
Pack:98 D/C:SSOP Vendor:Other Category:Other
This SN74ALVC162334 16-bit universal bus driver is designed for 1.65-V to 3.6-V VCC operation. Data flow from A to Y is controlled by the output-enable (OE) input.The device operates in the transparent mode wh...
Vendor:Other Category:Other
The SN74ALVC162268 is a 12-bit to 24-bit registered bus exchanger, which is intended for use in applications where data must be transferred from a narrow high-speed bus to a wide, lower-frequency bus. SN74ALVC162268 is d...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC INVERTER HEX SCH-TRIG 14-SOICThe SN74ALVC14D is designed as a hex schmitt-trigger inverter for 2.3V to 3.6V Vcc operation. SN74ALVC14D contains six independent inverters and performs the boolean function Y=/A.SN74ALVC14D has four features. (1)EPIC (...
Vendor:Other Category:Other
This hex Schmitt-trigger inverter is designed for 2.3-V to 3.6-V VCC operation.The SN74ALVC14 contains six independent inverters and performs the Boolean function Y = A.The SN74ALVC14 is characterized for operation from ...
Mfg:TI Pack:SOP-14P D/C:01+ Vendor:Other Category:Other
This quadruple bus buffer gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC126 features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is...
Vendor:Other Category:Other
This quadruple bus buffer gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC125 features independent line drivers with 3-state outputs. Each output is disabled when the associated output-enable (OE) input is...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC TRIPLE 3-IN NAND GATE 14-SOICThe SN74ALVC10D is one member of the SN74ALVC10 series.This triple 3-input positive-NAND gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC10 performs the Boolean function Y = A • B • C or Y = A ...
Vendor:Other Category:Other
This triple 3-input positive-NAND gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC10 performs the Boolean function Y = A • B • C or Y = A + B + C in positive logic.The SN74ALVC10 is characteriz...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC GATE AND QUAD 2INP 14-SOICThe SN74ALVC08D is characterized for operation from 40°C to 85°C. The device performs the Boolean function Y= A • B or Y=AB in positive logic. This quadruple 2-input positive-AND gate is designed for 1.65-V to 3.6-...
Pack:98+ D/C:SOP-14 Vendor:Other Category:Other
This quadruple 2-input positive-AND gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC08 device performs the Boolean function Y= A • B or Y=AB in positive logic.The SN74ALVC08 is characterized for oper...
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC HEX INVERTER 14-SOICThe SN74ALVC04D contains six independent inverters designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC04 performs the Boolean function Y = A.
The features of SN74ALVC04D are as follows: (1)Operates From 1.65 V to 3....
Vendor:Other Category:Other
This hex inverter contains six independent inverters designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC04 performs the Boolean function Y = A.
Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC GATE NAND QUAD 2INP 14-SOICThe SN74ALVC00D is designed as a quadruple 2-input positive NAND gate for 1.65V to 3.6V Vcc operation. SN74ALVC00D performs the boolean function in positive logic. It is characterized for operation from -40°C to 85°C.SN7...
Mfg:TI Pack:SOP-14P D/C:01+ Vendor:Other Category:Other
This quadruple 2-input positive-NAND gate is designed for 1.65-V to 3.6-V VCC operation.The SN74ALVC00 performs the Boolean function Y = A • B or Y = A + B in positive logic.The SN74ALVC00 is characterized for oper...
Vendor:Other Category:Other
These SN54ALS996 and SN74ALS996 8-bit latches are designed specifically for storing the contents of the input data bus and providing the capability of reading back the stored data onto the input data bus. The Q outputs ...
Vendor:Other Category:Other
This SN74ALS994 10-bit latch is designed specifically for storing the contents of the input data bus and providing the capability of reading back the stored data onto the input data bus.The SN74ALS994 ten latches are tra...
Vendor:Other Category:Other
This SN74ALS992 9-bit latch is designed specifically for storing the contents of the input data bus and providing the capability of reading back the stored data onto the input data bus. In addition, this device provides ...
Vendor:Other Category:Other
This SN74ALS990 8-bit latch is designed specifically for storing the contents of the input data bus and providing the capability of reading back the stored data onto the input data bus.The SN74ALS990 eight latches are tr...
Vendor:Other Category:Other
The SN74ALS879A is designed specifically for bus driving. The features of SN74ALS879A are as follows: (1)3-state bus driving outputs; (2)full parallel-access for loading; (3)buffered control inputs; (4)true outputs; (5)s...
Mfg:TI Pack:SOP D/C:01+ Vendor:Texas Instruments Category:Integrated Circuits (ICs)
IC FLIP FLOP 4BIT DUAL D 24-SOICThese SN74ALS874B, SN74ALS876A, SN74AS874, and SN74AS876 dual 4-bit D-type edge-triggered flip-flops feature 3-state outputs designed specifically as bus drivers. They are particularly suitable forimplementing buffer reg...
Vendor:Other Category:Other
These SN74ALS874B, SN74ALS876A, SN74AS874, and SN74AS876 dual 4-bit D-type edge-triggered flip-flops feature 3-state outputs designed specifically as bus drivers.SN74ALS874B, SN74ALS876A, SN74AS874, and SN74AS876 are ...
Vendor:Other Category:Other
These SN74ALS874B, SN74ALS876A, SN74AS874, and SN74AS876 dual 4-bit D-type edge-triggered flip-flops feature 3-state outputs designed specifically as bus drivers. SN74ALS874B, SN74ALS876A, SN74AS874, and SN74AS876 are ...
Vendor:Other Category:Other
These SN74ALS873B and SN74AS873A dual 4-bit D-type latches feature 3-state outputs designed specifically for bus driving. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectiona...
Vendor:Other Category:Other
This SN74ALS870 device features two 16-word by 4-bit register files. Each SN74ALS870 register file has individual write-enable (1W, 2W) controls and address lines. This device has two 4-bit data I/O ports (DQA1DQA4 and D...
Vendor:Other Category:Other
These SN74ALS867A and AS867 synchronous, presettable, 8-bit up/down counters feature internal-carry look-ahead circuitry for cascading in high-speed counting applications. Synchronous operation is provided by having all ...
Vendor:Other Category:Other
These SN74ALS867A and AS867 synchronous, presettable, 8-bit up/down counters feature internal-carry look-ahead circuitry for cascading in high-speed counting applications. Synchronous operation of SN74ALS867A and AS867 i...
© 2008-2012 SeekIC.com Corp.All Rights Reserved.