© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Response in 12 hours
Vendor:Other Category:Other
DS00026 is a low cost monolithic high speed two phase MOS clock drivers and interface circuits. Unique circuit design provides both very high speed operation and the ability to drive large capacitive loads. The DS00026 a...
Vendor:Other Category:Other
The LS502 is an 8-bit register with the interchange logic necessary to perform serial-to-parallel conversion and provide an active LOW Conversion Complete (CC) signal coincident with storage of the eighth bit. An active ...
Vendor:Other Category:Other
This MNDM54LS20-X contains two independent gates, each of which performs the logic NAND function.
Vendor:Other Category:Other
The DAC1054 is a complete quad 10-bit voltage-output digital-to-analog converter that can operate on a single 5V supply. It includes on-chip output amplifiers, internal voltage reference, and serial microprocessor interf...
Vendor:Other Category:Other
The DAC0854 is a complete quad 8-bit voltage-output digital-to-analog converter that can operate on a single 5V supply. It includes on-chip output amplifiers, internal voltage reference, and a serial microprocessor inter...
Vendor:Other Category:Other
The COP888 family of microcontrollers uses an 8-bit single chip core architecture fabricated with National Semiconductor's M2-CMOS(TM) process technology. The COP888CG is a member of this expandable 8-bit core processor ...
Vendor:Other Category:Other
The COP681 and COP680 are members of the COPS 8-bit microcontroller family. They are fully static parts, fabricated using double-metal silicon gate microCMOS technology. This low cost microcontroller is a complete microc...
Vendor:Other Category:Other
The COP680 and COP681 are members of the COPS 8-bit microcontroller family. COP680 and COP681 are fully static parts, fabricated using double-metal silicon gate microCMOS technology. This COP680 and COP681 low cost micro...
Vendor:Other Category:Other
The MM57408 and COP244 fully static, Single-Chip CMOS Microcontrollers are members of the COPS(TM) family, fabricated using double-poly, silicon gate microCMOS technology. These MM57408 and COP244 Controller Oriented Pro...
Vendor:Other Category:Other
The CLC532 is a high-speed 2:1 multiplexer with active input and output stages. The CLC532 also employs a closed-loop design which dramatically improves accuracy. This accurate monolithic device is constructed using an a...
Vendor:Other Category:Other
The CLC522 variable gain amplifier (VGA) is a dc-coupled, two-quadrant multiplier with differential voltage inputs and a single-ended voltage output. Two input buffers and an output operational amplifer are integrated wi...
Vendor:Other Category:Other
The CLC520 is a wideband DC-coupled amplifier with voltage-controlled gain (AGC). The amplifier has a high-impedance differential signal input, a high-bandwidth gain control input and a single-ended voltage output. Signa...
Vendor:Other Category:Other
The CLC501 is a high-speed current-feedback op amp with the unique feature of output voltage clamping. This feature allows both the maximum positive (Vhigh) and negative (Vlow) output voltage levels to be established. Th...
Vendor:Other Category:Other
The Comlinear CLC449 is an ultra-high-speed monolithic op amp, with a typical -3dB bandwidth of 1.2GHz at a gain of +2. This wideband op amp supports rise and fall times less than 1ns, settling time of 6ns (to 0.2%) and ...
Vendor:Other Category:Other
The CLC432 is a current-feedback amplifier that provides a wide bandwidth and high slew rate for applications where board density and power are key considerations. This amplifier provides a dc-coupled small signal bandwi...
Vendor:Other Category:Other
The Comlinear CLC430 is a low-cost, wideband monolithic amplifier for general purpose applications. The CLC430 utilizes Comlinear's patented current feedback circuit topology to provide an op amp with a slew rate of 2000...
Vendor:Other Category:Other
The CLC420B is an operational amplifier designed for applications requiring matched inputs and integration or transimpedance amplification. Utilizing voltage feedback architecture, the CLC420B offers a 300MHz bandwidth, ...
Vendor:Other Category:Other
The CLC420A is an operational amplifier designed for applications requiring matched inputs and integration or transimpedance amplification. Utilizing voltage feedback architecture, the CLC420A offers a 300MHz bandwidth, ...
Vendor:Other Category:Other
The Comlinear CLC412 combines a high-speed complementary bipolar process with Comlinear's current-feedback topology to produce a very high-speed dual op amp. The CLC412 provides a 250MHz small-signal bandwidth at a gain ...
Vendor:Other Category:Other
The current-feedback CLC410 is a fast-settling, wideband, monolithic op amp with fast disable/enable feature. Designed for low-gain applications (Av = +1 to +8), the CLC410 consumes only 160mW of power (180mW max) yet pr...
Vendor:Other Category:Other
The CLC409 is a very wideband, DC coupled monolithic operational amplifier designed specifically for wide dynamic range systems requiring exceptional signal fidelity. Benefiting from Comlinear's current feedback architec...
Vendor:Other Category:Other
The CLC401 is a wideband, fast-settling operational amplifier designed for applications requiring a gain greater than +7. Constructed using an advanced complementary bipolar process and a proprietary design, the CLC401 f...
Vendor:Other Category:Other
The CLC400 is a high-speed, fast-settling operational amplifier designed for low-gain applications. Constructed using a unique, proprietary design and an advanced complementary bipolar process, the CLC400 offers performa...
Vendor:Other Category:Other
The CLC114 is a high-performance, closed-loop quad buffer intended for power sensitive applications. Requiring only 30mW of quiescent power dissipation per channel (+5V supplies), the CLC114 offers a small signal bandwid...
Vendor:Other Category:Other
The ADC1251 is a CMOS 12-bit plus sign successive approximation analog-to-digital converter. On request, the ADC1251 goes through a self-calibration cycle that adjusts for any zero, full scale, or linearity errors. The A...
Vendor:Other Category:Other
The ADC12451 is a CMOS 12-bit plus sign successive approximation analog-to-digital converter whose dynamic specifications (S/N, THD,etc.) are tested and guaranteed. On request, the ADC12451 goes through a self-calibtatio...
Vendor:Other Category:Other
The ADC12441 is a CMOS 12-bit plus sign successive approximation analog-to-digital converter whose dynamic specifications (S/N, THD, etc.) are tested and guaranteed. On request, the ADC12441 goes through a self-calibrati...
Vendor:Other Category:Other
The ADC1241 is a CMOS 12-bit plus sign successive approximation analog-to-digital converter. On request, the ADC1241 goes through a self-calibration cycle that adjusts positive linearity and full-scale errors to less tha...
Vendor:Other Category:Other
Using an innovative multistep conversion technique, the 12-bit ADC12062 CMOS analog-to-digital converter digitizes signals at a 1MHz sampling rate while consuming a maximum of only 75mW on a single +5V supply. The ADC120...
Vendor:Other Category:Other
Using an innovative, patented multistep* conversion technique, the 10-bit ADC10064 CMOS analog-to-digital converter offers sub-microsecond conversion times yet dissipates a maximum of only 235mW. ADC10064 performs a 10-b...
Vendor:Other Category:Other
Using an innovative, patented multistep* conversion technique, the 10-bit ADC10062 CMOS analog-to-digital converter offers sub-microsecond conversion times yet dissipates a maximum of only 235mW. ADC10062 performs a 10...
Mfg:MINI Pack:QFN D/C:07+ Vendor:Other Category:Other
Mfg:MINI Pack:QFP8 D/C:05+ Vendor:Other Category:Other
Mfg:MINI Pack:QFN D/C:07+ Vendor:Other Category:Other
Mfg:MINI Pack:QFN D/C:07+ Vendor:Other Category:Other
Mfg:MINI Pack:N/A D/C:N/A Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:FUJITSU Pack:QFP Vendor:Other Category:Other
The MN89303A is an LCD/CRT display controller with IBM™ VGA-compatible registers. MN89303A features all the necessary interfaces for a compact display system: ISA bus interface, local bus interface, DRAM interface...
Mfg:PANASONI Pack:QFP D/C:08+ Vendor:Other Category:Other
The MN89302 is an LCD/CRT display controller with IBM™ VGA-compatible registers. MN89302 features all the necessary interfaces for a compact display system: ISA bus interface, local bus interface, DRAM interface, a...
Vendor:Other Category:Other
The MN89201 converts PC/AT VGA (640 × 480) display data into an NTSC video signal without requiring an external frame memory. It uses filtering to eliminate flicker and produce a high-quality television image.
Mfg:PAN Pack:SOP D/C:03+ Vendor:Other Category:Other
The MN88831 greatly streamlines set design by incorporating a satellite broadcasting PCM audio decoder, a switched capacitor D/A converter, and analog post filter to a single chip.
Mfg:PAN Pack:SOP D/C:03+ Vendor:Other Category:Other
The MN88413 is a channel decoder LSI that integrates functions for digital satellite communications and broadcast reception on a single chip.The MN88413 supports both the Digital Video Broadcast (DVB) and the Digital Sat...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
Mfg:PANASONI.. Pack:TQFP D/C:07+ Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
Mfg:QFP-44 Pack:PAN D/C:2004+ Vendor:Other Category:Other
The MN86157 contains a 7-bit A/D converter for use in correcting, at the bit level, shading distortion for signals from image sensors, optics, and similar sources.MN86157 uses external RAM to support adaptive correction ...
Mfg:PANASONIC Pack:QFP D/C:2008+ Vendor:Other Category:Other
The MN86074 boosts image quality by applying various image processing techniques to the analog signal from an image sensor. Features of MN86074 include correction of laser printer dot spreading at the pixel level, proces...
Vendor:Other Category:Other
The MN86063 is a high-speed LSI codec for compressing and decompressing facsimile images. Features of MN86063 include real-time printing to laser printers, built-in line memory, enlargement and reduction, and code conve...
Vendor:Other Category:Other
The MN86062 is a high-speed LSI codec for compressing and decompressing images using the MH, MR, and MMR standard compression methods specified in the ITU-T T.4 and T.6 recommendation. Registers and other settings of MN8...
Vendor:Other Category:Other
The MN85571AC is an audio/video encoder that performs video compression in conformance with the ISO/IEC 13818-2 (MPEG2 video) and ISO/IEC 11172-2 (MPEG1 video) standards and audio compression in conformance with the Dolb...
Vendor:Other Category:Other
The MN85560 is an MPEG2 video encoder that outputs encoded data that conform to the ISO/IEC 1318-2 (MPEG2 video) Main Profile@Main Level and ISO/IEC 1172-2 (MPEG1 video) standards.
Vendor:Other Category:Other
The MN8390-C is for displaying an analog video signal on a TFT color liquid crystal display panel in such applications as LCD television sets and video cameras.
Vendor:Other Category:Other
Vendor:Other Category:Other
This MN838898 LSI converts the digital display data from a personal computer, portable device, or other source into analog signals for driving a color TFT LCD panel.
Vendor:Other Category:Other
Vendor:Other Category:Other
The MN838850 converts digital display data from a personal computer or an engineering workstation to analog signal voltages to allow those signals to be displayed on a color TFT LCD panel.
Vendor:Other Category:Other
The MN83876A converts digital display data from a personal computer or engineering workstation into analog signal voltages for driving thin-film transistor color LCD panels.
Mfg:11 Pack:Panasonic Vendor:Other Category:Other
Mfg:PANASONIC Pack:QFP D/C:08+ Vendor:Other Category:Other
MN6775511 is fully compatible with DVD-Video, DVD Audio and DVD-Video Recording. Features for the MN6775511 include: MPEG Video, JPEG decode and Dolby Digital, MPEG1 (Layer2/Layer3), MPEG2 (Layer2/Layer3), MPEG Multi Cha...
Mfg:PANA Pack:QFP44 D/C:08+ Vendor:Other Category:Other
The MN67621F generates color video camera synchronizing signals for the NTSC, PAL, and SECAM video systems.MN67621F divides the reference frequency to generate the horizontal synchronizing signal fH , the vertical synchr...
Pack:SOP D/C:09+ Vendor:Other Category:Other
The MN6761S is an external synchronization control LSI for color video cameras.When used in combination with a synchronizing signal generator (MN67601NS or MN67602PS), MN6761Sprovides external synchronization control for...
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The MN67603NS is a CMOS LSI that generates NTSC color camera synchronizing signals as defined by the EIA RS-170A standard.MN67603NS features a built-in 4fSC (14.31818 MHz) crystal oscillator circuit and divides that freq...
Mfg:MEC Pack:SOP28W D/C:2007+ Vendor:Other Category:Other
The MN676011NPS is a CMOS LSI that generates NTSC color camera synchronizing signals as defined by the EIA RS-170A standard.MN676011NPS features a built-in 4fSC (14.31818 MHz) crystal oscillator circuit and divides that ...
Vendor:Other Category:Other
This MN673794 IC is used to process a variety of items including the following ones: NTSC/PAL signal (Y/C and composite video) I/O, 3D Y/C separation, TBC, DD conversion, frame sync, sync/clock generation, Rec 656 I/O.
Vendor:Other Category:Other
Vendor:Other Category:Other
Vendor:Other Category:Other
The MN67328 is a type of preprocessor, which is designed for digital still camera corresponding to progressive scan system CCD for RGB checked arrangement color filter VGA. MN67328 has JPEG pre disposal, the analog vedio...
Mfg:N/A Pack:QFP D/C:06+ Vendor:Other Category:Other
MN673276 is an LSI for monitoring cameras and PC inputs. In addition to MN673276's standard function, i.e. luminance and chroma signal processing, this LSI features ALC, AWB, and AGC, which have conventionally been left ...
Vendor:Other Category:Other
The MN6732741 is camera signal-processing IC appropriate for a wide variety of applications, including surveillance cameras and cameras used for input to personal computers. In addition to the basic functions of luminanc...
Vendor:Other Category:Other
The MN673274 is designed for surveillance and PC input cameras. In addition to the basic functions of luminance signal and chrominance signal processing, it also integrates microcontroller functions (ALC, AWB, and AGC) a...
Mfg:QFP Pack:43 D/C:PAN Vendor:Other Category:Other
The MN673273 is a signal processing LSI for digital cameras inputting to computer. In addition to the basic functions of luminance signal and chrominance signal processing, the MN673273 integrates microcontroller functio...
Mfg:Panasonic Pack:QFP Vendor:Other Category:Other
The MN66710 is a single-chip digital signal processing LSI for a DAB (digital audio broadcast) receiver, including OFDM demodulation, service selection, error correction, and MPEG audio decoding. It conforms to the Europ...
Vendor:Other Category:Other
Vendor:Other Category:Other
The MN6650A is a digital servo LSI for creating highprecision servo systems with completely self-adjusting focus, tracking, and traverse servos.
Mfg:panasonic Pack:QFP D/C:01+ Vendor:Other Category:Other
The MN662747RPH is a CD signal processing LSI that, on a single chip, combines optics servos for the CD player (focus, tracking, and traverse servos), digital signal processing (EFM demodulation and error correction), di...
Mfg:PANASONIC Pack:QFP D/C:03+ Vendor:Other Category:Other
The MN662741RH is a CD signal processing LSI that, on a single chip, combines an optics servo for the CD player (focus, tracking, and traverse servos), digital signal processing (EFM demodulation and error correction), d...
Mfg:PANASONIC D/C:03+ Vendor:Other Category:Other
The MN662740RE is a CD signal processing LSI that, on a single chip, combines an optics servo for the CD player (focus, tracking, and traverse servos), digital signal processing (EFM demodulation and error correction), d...
Mfg:PANA D/C:QFP Vendor:Other Category:Other
The MN662724RPE is a CD signal processing LSI that, n a single chip, combines an optics servo for the CD layer (focus, tracking, and traverse servos), digital signal rocessing (EFM demodulation and error correction), nd ...
Mfg:500 Pack:PANASONIC Vendor:Other Category:Other
The MN66271RA is a CD signal processing LSI that, on a single chip, combines optics servos for the CD player (focus, tracking, and traverse servos), digital signal processing (EFM demodulation and error correction), digi...
Mfg:PANASONIC Pack:QFP D/C:08+ Vendor:Other Category:Other
The MN662710RA is a CD signal processing LSI that, on a single chip, combines an optics servo for the CD player (focus, tracking, and traverse servos), digital signal processing (EFM demodulation and error correction), d...
Pack:QFP D/C:03+ Vendor:Other Category:Other
The MN6626 is a CD signal processing LSI that, on a single chip, provides both basic CD player signal processing (EFM demodulation, error correction, and CLV servo) and extra functionality for increasing the versatility ...
Pack:QFP D/C:0 Vendor:Other Category:Other
The MN6577F and MN6577H are high-speed 10-bit CMOS analog-to-digital converters for image processing applications. MN6577F and MN6577H use a half flash structure based on chopper comparators to achieve both high speed ...
Mfg:QFP-48 Pack:PAN D/C:2004+ Vendor:Other Category:Other
The MN6577F and MN6577H are high-speed 10-bit CMOS analog-to-digital converters for image processing applications. MN6577F and MN6577H use a half flash structure based on chopper comparators to achieve both high speed a...
Mfg: Pack:5 D/C:QFP Vendor:Other Category:Other
The MN65771F is a high-speed 10-bit CMOS analogto-digital converter for image processing applications.MN65771F uses a half flash structure based on chopper comparators to achieve both high speed and low power consumptio...
Vendor:Other Category:Other
The MN6576H is a high-speed 9-bit CMOS analog-todigital converter for image processing applications.It uses a half flash structure based on chopper comparators and achieves both high speed and low power consumption with ...
Mfg:PANA Pack:QFP D/C:2001 Vendor:Other Category:Other
The MN65761T is a high-speed 9-bit CMOS analogto- digital converter for image processing applications. It uses a half flash structure based on chopper comparators and achieves both high speed and low power consumption wi...
Mfg: Pack:5 D/C:QFP Vendor:Other Category:Other
The MN65752H is an 8-bit, 2-channel CMOS analogto- digital converter for image processing applications.MN65752H uses a half flash structure based on chopper comparators and achieves both high speed and low power consumpt...
Mfg:PANSONIC Pack:02 D/C:238 Vendor:Other Category:Other
The MN65742 is a 6-bit, 2-channel CMOS analog-todigital converter. MN65742 uses a totally parallel structure based on differential comparators to achieve high-speed operation.
Vendor:Other Category:Other
The MN6570F, MN6570TF, and MN6570EF are highspeed 8-bit, 3-channel CMOS digital-to-analog converters with maximum conversion rates of 35 MSPS, 40 MSPS, and 40 MSPS, respectively.MN6570F, MN6570TF, and MN6570EF use both a...
Vendor:Other Category:Other
The MN6570F, MN6570TF, and MN6570EF are highspeed 8-bit, 3-channel CMOS digital-to-analog converters with maximum conversion rates of 35 MSPS, 40 MSPS, and 40 MSPS, respectively.MN6570F, MN6570TF, and MN6570EF use both ...
Mfg:PANASONIC Pack:QFP44 D/C:08+ Vendor:Other Category:Other
The MN6570F, MN6570TF, and MN6570EF are highspeed 8-bit, 3-channel CMOS digital-to-analog converters with maximum conversion rates of 35 MSPS, 40 MSPS, and 40 MSPS, respectively.MN6570F, MN6570TF, and MN6570EF use both a...
Vendor:Other Category:Other
The MN65702H is a high-speed 8-bit, 3-channel CMOS digital-to-analog converter. (Two channels use serial input.)MN65702H uses both a matrix cell and weighted current technology to achieve both low power consumption and ...
Mfg:PANASONI.. Pack:98+ D/C:QFP Vendor:Other Category:Other
The MN657021F is a high-speed 8-bit, 3-channel CMOS digital-to-analog converter. (Two channels use serial input.)MN657021F uses both a matrix cell and weighted current technology to achieve both low power consumption and...
D/C:02 Vendor:Other Category:Other
The MN657011H is an 8-bit, 3-channel CMOS digitalto- analog converter with a maximum conversion rate of 20 MSPS.MN657011H is a 3.5 volt version of the MN65701FHP.
© 2008-2012 SeekIC.com Corp.All Rights Reserved.