About SeekIC | Services | Payment | Advertisements service | Contact Us| Justway | Links
© 2008-2012 SeekIC.com Corp.All Rights Reserved.
Suppliers
DataSheet
Response in 12 hours
Index R : RF2861,RF2722,RF2320,
RF2861
Mfg:RFMD Pack:DIP/SMD D/C:0633 Vendor:Other Category:Other
The RF2861 is a receiver front-end for CDMA cellular applications, including JCDMA and CDMA450. RF2861 is designed to amplify and downconvert RF signals, using a three gain state LNA to obtain 17dB of stepped gain contro...RF2722
Mfg:RFMD Pack:QFN D/C:04+ Vendor:Other Category:Other
The RF2722 is a highly-integrated receiver IC supporting GSM, GPRS, and EDGE cellular standards in the GSM850, EGSM, DCS, and PCS bands. The RF2722 supports both very-low intermediate frequency (VLIF) as well as direct c...RF2721
Mfg:44 Pack:RFMD Vendor:Other Category:Other
The RF2721 is a monolithic integrated quadrature demodulator intended for use in digital mobile radio receivers. In this application it is used to recover the inphase and quadrature baseband signals from the amplified an...RF2713
Mfg:RFMD D/C:03+ Vendor:Other Category:Other
The RF2713 is a monolithic integrated quadrature modulator/ demodulator. The demodulator is used to recover the I and Q baseband signals from the amplified and filtered IF. Likewise, the inputs and outputs can be reconfi...RF2705
Mfg:RF Pack:QFN D/C:04+ Vendor:Other Category:Other
The RF2705 is a low noise, multi-mode, quad-band directI/Q to RF modulator and PA driver designed for handsetapplications where multiple modes of operation arerequired. Frequency doublers, dividers and LO buffersare incl...RF2690
Vendor:Other Category:Other
The RF2690 is an integrated complete IF AGC amplifier and quadrature demodulator designed for the receive section of W-CDMA applications. RF2690 is designed to amplify received IF signals, while providing 70dB of gain co...RF2689
Vendor:Other Category:Other
The RF2689 is an integrated complete IF AGC amplifier and quadrature demodulator designed for the receive section of W-CDMA and GSM/DCS applications. RF2689 is designed to amplify received IF signals, while providing 70d...RF2681
Vendor:Other Category:Other
The RF2681 is a linear variable gain amplifier specifically designed for PA driver applications in W-CDMA handsets. The RF2681device maintains excellent linearity over a 30dB gain control range, while providing a maximum...RF2670
Vendor:Other Category:Other
The RF2670 is a monolithic integrated circuit specifically designed for direct conversion to baseband QPSK receivers. The part RF2670 provides dual baseband amplifiers with a 70dB gain range (single pin analog input) and...RF2668
Vendor:Other Category:Other
The RF2668 is an integrated complete quadrature modu-lator, IF AGC amplifier, upconverter, and PLL, designed for the transmit section of dual-mode CDMA/FM cellular,PCS, and tri-mode CDMA applications. RF2668 is designed ...RF2667
Vendor:Other Category:Other
The RF2667 is an integrated complete IF AGC amplifier and quadrature demodulator developed for the receive section of dual-mode CDMA/FM cellular and PCS applications and for GSM/DCS and TDMA systems. RF2667 is designed t...RF2658
Mfg:RFMD Pack:SSOP D/C:0015+ Vendor:Other Category:Other
The RF2658 is an integrated complete Quadrature Modulator, IF AGC amplifier, and Upconverter developed for the transmit section of dual-mode CDMA/FM cellular and PCS applications and for GSM/DCS and TDMA systems. RF2658 ...RF2643
Mfg:4352 Pack:RFMD D/C:02+ Vendor:Other Category:Other
The RF2643 is a complete upconverter, dual-power amplifier driver and attenuator designed for Cellular and PCS systems. It is designed to upconverter and amplifies RF signals while providing 22dB of linear gain control r...RF2642
Mfg:RFMD Pack:LCC-16 D/C:00+ Vendor:Other Category:Other
The RF2642 is a complete upconverter and power amplifier driver designed for CDMA applications. The design features driver amplifier high and low gain states. In the low gain state, the gain is adjustable and the device ...RF2641
Mfg:RFMD Pack:TSSOP Vendor:Other Category:Other
The RF2641 is a complete upconverter designed for cel-lular and PCS applications. This device may also be used to directly BPSK modulate a carrier. The unit operates at 3.0V and is designed as part of the RFMD PCS/Cellul...RF2640
Mfg:RFMD Pack:MSOP10 D/C:03+ Vendor:Other Category:Other
The RF2640 is a complete upconverter and power amplifier driver designed for TDMA and CDMA applications. The device features balanced IF inputs, single-ended LO input and RF output for ease of interface. Packaged in an i...RF2638
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The RF2638 is a complete upconverter designed for cellular, PCS and W-CDMA applications. This device may also be used to directly BPSK modulate a carrier. The unit operates at 3.0V and is designed as part of the RFMD PCS...RF2637
Vendor:Other Category:Other
The RF2637 is a complete AGC amplifier designed for the receive section of 3V cellular and PCS applications basestations. RF2637 is designed to amplify IF signals while providing more than 90dB of gain control range. Noi...RF2629
Mfg:RF Pack:MSOP D/C:2005+ Vendor:Other Category:Other
The RF2629 is a complete AGC amplifier designed for the transmit section of 3V dual-mode CDMA/FM cellular and PCS applications. RF2629 is designed to amplify IF signals while providing more than 84dB of gain control rang...RF2628
Mfg:RF Vendor:Other Category:Other
The RF2628 is a complete upconverter designed for CDMA/FM cellular applications. The IC contains a dou-ble-balanced mixer stage and an output buffer amplifier stage. This device RF2628 may also be used to directly BPSK m...RF2627
Mfg:RF D/C:02+ Vendor:Other Category:Other
The RF2627 is a complete AGC amplifier designed for the receive section of 3V CDMA cellular and PCS applications. RF2627 is designed to amplify IF signals while providing more than 90dB of gain control range. Noise Figur...RF2619
Mfg:12000 Pack:RFMD Vendor:Other Category:Other
The RF2619 is a complete AGC amplifier designed for the transmit section of 3V dual-mode CDMA/FM cellular applications. It is designed to amplify IF signals while providing more than 84dB of gain control range. Noise Fig...RF2617
Mfg:29500 Pack:SOP8 D/C:00+ Vendor:Other Category:Other
The RF2617 is a complete AGC amplifier designed for the receive section of 3V dual-mode CDMA/FM cellular applications. It is designed to amplify IF signals while providing more than 90dB of gain control range. Noise Figu...RF2609
Mfg:3700 Pack:RFMD Vendor:Other Category:Other
The RF2609 is a complete AGC amplifier designed fore transmit section of dual-mode CDMA/FM cellular applications. It is designed to amplify IF signals while pro-viding more than 84dB of gain control range. Noise Fig-ure,...RF2608
Mfg:RFMD Pack:SOP8 Vendor:Other Category:Other
The RF2608 is a complete upconverter designed for CDMA/FM cellular applications. The IC contains a dou-ble-balanced mixer stage and an output buffer amplifier stage. This device may also be used to directly BPSK modulate...RF2607
Mfg:15200 Pack:RFMD Vendor:Other Category:Other
The RF2607 is a complete AGC amplifier designed for the receive section of dual-mode CDMA/FM cellular applications. It is designed to amplify IF ignals while pro-viding more than 90dB of gain control range. Noise Fig- re...RF2603
Vendor:Other Category:Other
The RF2603 is a upconverter/pre-driver designed for PCS systems. The device features single-ended IF and LO inputs and single-ended RF output for ease of interface. The RF2603 is manufactured on an advanced Gallium Arsen...RF2516
Mfg:36 Pack:RF Vendor:Other Category:Other
The RF2516 is a monolithic integrated circuit intended for use as a low-cost AM/ASK transmitter. The device is provided in a 16-pin QSOP-16 package and is designed to provide a phased locked frequency source for use in l...RF2514
Mfg:RFMD Pack:SOP D/C:0110+ Vendor:Other Category:Other
The RF2514 is a monolithic integrated circuit intended for use as a low-cost AM/ASK transmitter. The device is provided in a 4mmx4mm, 16-pin leadless chip carrier and is designed to provide a phased locked frequency sour...RF2513
Mfg:RF D/C:99+00+ Vendor:Other Category:Other
The RF2513 is a monolithic integrated circuit intended for use as a low-cost frequency synthesizer and transmitter. The device is provided in a 24 pin SSOP package and is designed to provide a phased locked frequency sou...RF2512
Mfg:RFMD Vendor:Other Category:Other
The RF2512 is a monolithic integrated circuit intended for use as a low-cost frequency synthesizer and transmitter. The device is provided in a 24 pin SSOP package and is designed to provide a phased locked frequency sou...RF2510
Mfg:1266 Pack:RF Vendor:Other Category:Other
The RF2510 is a monolithic integrated circuit intended for use as a low-cost Frequency Synthesizer. The device is provided in a 16 pin SSOP package and is designed to provide a phased locked frequency source for use in ...RF2506
Vendor:Other Category:Other
The RF2506 is an integrated oscillator and buffer amplifierhain designed to achieve low sensitivity to fluctuationsin load impedance and power supply noise, whilemaintaining superior phase noise performance. The ICoffers...RF2504
Mfg:CH Pack:SO-8 D/C:07+ Vendor:Other Category:Other
The RF2504 is an integrated oscillator and buffer amplifier chain designed to achieve extremely low sensitivity to fluctuations in load impedance and power supply noise, thereby greatly reducing load pulling and pushing....RF2498
Vendor:Other Category:Other
The RF2498 is a high performance CDMA tri-band/quadmode integrated LNA/mixer with GPS capability. The device is designed to meet all IS-98 sensitivity, intermodulation and single-tone requirements. The RF2498 integrates ...RF2495
Vendor:Other Category:Other
The RF2495 is a front-end receiver IC chip developed for the handset/portable battery-powered equipment markets. The chip contains an RF 15dB attenuator, an LNA and a passive mixer. By using a state-of-the-art Silicon Bi...RF2494
Mfg:N/A Pack:. D/C:08+ Vendor:Other Category:Other
The RF2494 is a monolithic integrated UHF receiver front end suitable for 2.4GHz ISM band applications. The IC contains all of the required components to implement the RF functions of the receiver except for the passive ...RF2492
Vendor:Other Category:Other
The RF2492 is a fully featured dual-band LNA/Mixer and is usable in a variety of mobile handset applications. The unique dual IF outputs provide interface to two independent IF SAW filters supporting applications such as...RF2489
Vendor:Other Category:Other
The RF2489 is a high performance CDMA dual-band/trimode integrated LNA/mixer. The device is designed to meet all IS-98 sensitivity, intermodulation and single-tone requirements. The operating voltage is 2.7V and is compa...RF2488
Vendor:Other Category:Other
The RF2488 is a dual-band LNA/Mixer designed to supportdual-band, multi-mode handset applications. Theunique dual IF outputs provide interface to two independentIF SAW filters supporting applications that combineIS136 wi...RF2486
Mfg:RFMD Pack:SSOP24 Vendor:Other Category:Other
The RF2486 is a monolithic integrated receiver front-end for PCS, PHS, and WLAN applications. The IC contains all of the required components to implement the RF functions of the receiver front-end except for the passive ...RF2485
Vendor:Other Category:Other
The RF2485 is a monolithic integrated universal modulation system capable of generating modulated AM, PM, or compound carriers in the VHF and UHF frequency range. The IC contains all of the required components to impleme...RF2484
Vendor:Other Category:Other
The RF2484 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for highfrequency AM, PM, or compound carriers. This low-cost IC features excellent linearity, noise floor, and over-te...RF2483
Vendor:Other Category:Other
The RF2483 is a dual-band direct I/Q to RF modulatordesigned for handset applications where multiple modesof operation are required. The device provides commondifferential I/Q inputs and a common AGC amplifier. Independe...RF2480
Mfg:RF MICRO D/C:07+ Vendor:Other Category:Other
The RF2480 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for highfrequency AM, PM, or compound carriers. This low-cost IC features excellent linearity, noise floor, and over-te...RF2475
Mfg:RFMD Pack:QFN Vendor:Other Category:Other
The RF2475 includes two downconverting mixers and associated LNAs. It is designed for IS136 handset applications in the cellular 800MHz and PCS 1900MHz bands. Each LNA has a gain bypass mode, which is controlled by the g...RF2472
Mfg:RF D/C:04+ Vendor:Other Category:Other
The RF2472 is a general purpose, low-cost, high-performance amplifier designed for operation from a 2.7V to 4V supply with low current consumption. The device is optimized for 2.4GHz LNA applications, but is also useful ...RF2469
Vendor:Other Category:Other
The RF2469 is a receiver front-end designed for thereceive section of W-CDMA and PCS applications. It isdesigned to amplify and downconvert RF signals whileproviding 23dB of stepped gain control range and featuresdigital...RF2466
Mfg:N/A D/C:01+ Vendor:Other Category:Other
The RF2466 is a receiver dual downconverter designed for the receive section of dual-mode CDMA/FM cellular applications. It is designed to downconvert RF signals while providing 14dB gain in CDMA mode and 7dB gain in FM ...RF2461
Pack:QFN Vendor:Other Category:Other
The RF2461 is a receiver front-end designed for the receive section of dual-mode CDMA/FM cellular applications. It is designed to amplify and downconvert RF signals, while providing 30dB of stepped gain control range. Fe...RF2460
Mfg:RFMD Pack:BGA D/C:08+ Vendor:Other Category:Other
The RF2460 is a receiver front-end designed for thereceive section of PCS CDMA and W-CDMA applications.It is designed to amplify and downconvert RF signalswhile providing 29dB of stepped gain control rangeand features di...RF2459
Mfg:RFMD D/C:00+ Vendor:Other Category:Other
The RF2459 is a monolithic integrated downconverter for PCS, PHS, and WLAN applications. The IC contains all of the required components to implement the RF functions of the downconverter. It contains a double-balanced Gi...RF2456
Mfg:RFMD Vendor:Other Category:Other
The RF2456 is a receiver dual downconverter designed for the receive section of dual-mode CDMA/FM cellular applications. It is designed to downconvert RF signals while providing 13dB gain in CDMA mode, and 7dB gain in FM...RF2451
Mfg:RFMD D/C:99+ Vendor:Other Category:Other
The RF2451 is a general purpose, low-cost, high performance low noise amplifier designed for operation from a 2.7V to 4V supply with low current consumption. The attenuation of the device is controlled when in power down...RF2449
Mfg:RF Pack:SSOP24 D/C:00+ Vendor:Other Category:Other
The RF2449 is a receiver front-end designed for the receive section of dual-mode CDMA/FM cellular applications.It is designed to amplify and downconvert RF signals, while p roviding 30dB of stepped gain control range. Fe...RF2444
Pack:SSOP D/C:00+ Vendor:Other Category:Other
The RF2444 is a monolithic integrated UHF receiver front end suitable for 2.4GHz ISM band applications. The IC contains all of the required components to implement the RF functions of the receiver except for the passive ...RF2442
Mfg:SOP8 Pack:RFMD D/C:99+ Vendor:Other Category:Other
The RF2442 is a low noise amplifier with a very highdynamic range designed for the receive front end of digitalcellular applications at 900MHz, 1900MHz, and2400MHz. It is designed to amplify low level signals withminimum...RF2436
Vendor:Other Category:Other
The RF2436 is a very low-cost transmit/receive GaAs MESFET switch. RF2436 can handle power levels as high as +28dBm and spans a frequency range from DC to 2500MHz. The switch will operate from power supply voltages as lo...RF2425
Vendor:Other Category:Other
The RF2425 is a very low-cost single-throw, double-pole GaAs MESFET switch. There are two bidirectional input/ output channels which RF2425 can be turned off or on by a single logic control line. Two of the ports may be ...RF2424
Vendor:Other Category:Other
The RF2424 is a monolithic integrated quadrature modulator RF2424 IC capable of universal direct modulation for highfrequency AM, PM, or compound carriers. Maximum output power is +7.5dBm, which is achieved with low inpu...RF2423
Pack:SMD Vendor:Other Category:Other
The RF2423 is a monolithic integrated transmitter RF2423 IC apable of universal direct modulation for UHF AM, PM, rcompound carriers. The transmitter may be used tand-alone for applications requiring not more than 00mW o...RF2422
Mfg:RFMD Vendor:Other Category:Other
The RF2422 is a monolithic integrated quadrature modulator IC capable of universal direct modulation for highfrequency AM, PM, or compound carriers. This low-cost IC RF2422 implements differential amplifiers for the modu...RF2421
Pack:SOP Vendor:Other Category:Other
The RF2421 is a monolithic switched attenuator. RF2421 is built using a Gallium Arsenide process technology and has a single step attenuation of 10dB. The input and output of the device has a low VSWR 50 match. The RF ou...RF2420
D/C:07+ Vendor:Other Category:Other
The RF2420 is a multistage monolithic programmable attenuator. RF2420 is built using an advanced Gallium Arsenide process technology and has an attenuation programmability over a 44dB range in 2dB steps. The attenuation ...RF2418
Mfg:RFMD Vendor:Other Category:Other
The RF2418 is a monolithic integrated UHF receiver front-end. The IC contains all of the required components to implement the RF functions of the receiver except for the passive filtering and LO generation. RF2418 contai...RF2416
Mfg:RFMD Vendor:Other Category:Other
The RF2416 is a dual-band low noise amplifier with bypass switch designed for use as a front-end for 950MHz GSM and DCS1800/PCS1900 applications. RF2416 may also be used for dual-band cellular/PCS application. The 900MHz...RF2413
Mfg:RF D/C:97+ Vendor:Other Category:Other
The RF2413 is a monolithic integrated transmitter universal modulation IC capable of generating modulated AM, PM, or compound carriers in the VHF/UHF frequency range. The modulation of RF2413 is performed at VHF, then th...RF2411
Mfg:38 Pack:RFMD Vendor:Other Category:Other
The RF2411 is a monolithic integrated UHF receiver front-end. The IC contains all of the required components to implement the RF functions of the receiver except for the passive filtering and LO generation. RF2411 contai...RF2402
Mfg:RF Pack:9835+ D/C:SOP Vendor:Other Category:Other
The RF2402 is a monolithic integrated universal modulation system capable of generating modulated AM, PM, or compound carriers in the UHF frequency range. The IC contains all of the required components to implement the m...RF2381
Vendor:Other Category:Other
The RF2381 is a linear variable gain amplifier suitable for use in TDMA and CDMA systems in the cellular or PCS band and for W-CDMA systems. The features of RF2381 include linear gain control, high gain, and high lin-ear...RF2377
Mfg:JAT Pack:SOT-153 D/C:05+ Vendor:Other Category:Other
The RF2377 is a linear variable gain amplifier suitable for use in TDMA and CDMA systems in the cellular or PCS band and for W-CDMA systems. The features of RF2377 include linear gain control, high gain, and high lin-ear...RF2376
Vendor:Other Category:Other
The RF2376 is a linear variable gain amplifier suitable for use in TDMA and CDMA systems in the cellular band. The features of RF2376 include linear gain control, high gain, and low noise figure. The RF2376 is manufactur...RF2373
Mfg:RFMD D/C:IC3VLOW-NOISEAMPRF2373SOT5 Vendor:Other Category:Other
The RF2373 is a low noise amplifier with a very high dynamic range designed for WLAN and digital cellular applications.RF2373 functions as an outstanding front end low noise amplifier or driver amplifier in the transmit ...RF2371
Vendor:Other Category:Other
The RF2371 is a general purpose, low-cost, high performance low noise amplifier designed for operation from a 2.7V to 4V supply with low current consumption. The attenuation of the device is controlled when in power down...RF2370
Vendor:Other Category:Other
The RF2370 is a switchable low noise amplifier with a very high dynamic range designed for digital cellular and WLAN applications. The device functions as an outstanding front end low noise amplifier. The bias current ma...RF2369
Mfg:RFMD Pack:SOT-6 D/C:01+ Vendor:Other Category:Other
The RF2369 is a switchable low noise amplifier with a very high dynamic range designed for digital cellular applications. RF2369functions as an outstanding front end low noise amplifier. When used as an LNA, the bias cur...RF2368
Mfg:RFMD Vendor:Other Category:Other
The RF2368 is a DCS/PCS low noise amplifier with bypass switch designed for use as a front-end for DCS1800/PCS1900 applications. The LNA is a two-stage amplifier with bypass switch. RF2368 has low noise figure and high l...RF2367
Mfg:RF Microdevice D/C:06+ Vendor:Other Category:Other
The RF2367 is a low noise CDMA/TDMA/GSM PA driver amplifier with a very high dynamic range designed for transmit digital PCS applications with frequency ranges between 1700MHz and 2000MHz.RF2367 functions as an outstandi...RF2366
Mfg:RFMD D/C:02+ Vendor:Other Category:Other
The RF2366 is a switchable low noise amplifier with a very high dynamic range designed for digital cellular applications. RF2366 functions as an outstanding front end low noise amplifier. When used as an LNA, the bias cu...RF2365
Mfg:RFMD D/C:00+ Vendor:Other Category:Other
The RF2365 is a low noise amplifier with a high dynamic range designed for the receive front end of digital cellular applications at PCS/DCS frequencies.RF2365 is designed to amplify low level signals with minimum noise ...RF2364
Mfg:N/A Pack:NA/ D/C:09+ Vendor:Other Category:Other
The RF2364 is a low noise amplifier with a high dynamic range designed for CDMA and TDMA PCS, as well as W-CDMA/CDMA2000 applications. RF2364 functions as an outstanding front end low noise amplifier and the bias current...RF2363
Mfg:RFMD Pack:TO-23 Vendor:Other Category:Other
The RF2363 is a dual-band Low Noise Amplifier designed for use as a front-end for 950MHz GSM/ 1850MHz DCS applications and may be used for dualband cellular/PCS applications. The 900MHz LNA is a single-stage amplifier; t...RF2362
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
The RF2362 is a low noise CDMA/TDMA PA driver ampli-fier with a very high dynamic range designed for transmit digital PCS applications at 1880MHz. RF2362 func-tions as an outstanding PA driver amplifier in the transmit c...RF2361
Mfg:MIC Pack:SOT23-5 Vendor:Other Category:Other
The RF2361 is a low noise amplifier with a very high dynamic range designed for digital cellular applications. RF2361 functions as an outstanding front end low noise amplifier or power amplifier driver amplifier in the t...RF2360
Vendor:Other Category:Other
The RF2360 is a general purpose, low-cost, high-linearity RF amplifier IC. RF2360 is manufactured on a Gallium Arsenide process and is featured in an SOP-16 batwing package. RF2360 has been designed for use as an easily ...RF2352
Vendor:Other Category:Other
The RF2352 is a low noise driver amplifier for 900MHz CDMA/AMPS applications.RF2347 is designed for operation from 2.7V to 3.6V, and features selectable high and low gain modes. In high gain mode, RF2347 will provide abo...RF2347
Mfg:PHI Vendor:Other Category:Other
The RF2347 is a low noise amplifier with a very high dynamic range designed for digital cellular applications at 900MHz. RF2347 functions as an outstanding front end low noise amplifier or power amplifier driver amplifie...RF2338
Vendor:Other Category:Other
The RF2338 is a general purpose, low-cost RF amplifier IC. RF2338 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50&...RF2337
Mfg:RF D/C:00+ Vendor:Other Category:Other
The RF2337 is a general purpose, low-cost RF amplifier IC. RF2337 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50&...RF2336
Vendor:Other Category:Other
The RF2336 is a general purpose, low-cost RF amplifier IC. RF2336 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50&...RF2335
Vendor:Other Category:Other
The RF2335 is a general purpose, low-cost RF amplifier IC. RF2335 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50&...RF2334
Vendor:Other Category:Other
The RF2334 is a general purpose, low-cost RF amplifier IC. RF2334 is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable 50&...RF2333
Vendor:Other Category:Other
The RF2333 is a general purpose, low-cost RF amplifier IC. The device is manufactured on an advanced Gallium Arsenide Heterojunction Bipolar Transistor (HBT) process, and has been designed for use as an easily-cascadable...RF2326
Mfg:PHI D/C:3 Vendor:Other Category:Other
The RF2326 is a general purpose, low-cost silicon amplifier designed for operation from a 3V supply. The Darlington circuit configuration with resistive feedback allows for broadband cascadable amplification. RF2326 is u...RF2325
Mfg:RF D/C:99+ Vendor:Other Category:Other
The RF2325 is a general purpose, low-cost silicon amplifier designed for operation from a 3V supply. The Darlington circuit configuration with resistive feedback allows for broadband cascadable amplification. RF2325 is u...RF2324
Pack:SSOP D/C:00+ Vendor:Other Category:Other
The RF2324 is a low noise CDMA/TDMA PA driver ampli-fier with a very high dynamic range designed for transmit digital PCS applications at 1880MHz. RF2324 func-tions as anoutstanding PA driver amplifier in the transmit ch...RF2323
Mfg:N/A Pack:N/A D/C:09+ Vendor:Other Category:Other
The RF2323 is a general purpose, low-cost silicon ampli-fier designed for operation from a 3V supply. The circuit RF2323 configuration with resistive feedback allows for broad-band cascadable amplification. Capacitive co...RF2322
Vendor:Other Category:Other
The RF2322 is a general purpose, low-cost silicon ampli-fier designed for operation from a 3V supply. The circuit RF2322 configuration with resistive feedback allows for broad-band cascadable amplification. Capacitive co...RF2321
Vendor:Other Category:Other
The RF2321 is a general purpose, low-cost silicon amplifier designed for operation from a 3V supply. The circuit RF2321 configuration with resistive feedback allows for broadband cascadable amplification. Capacitive comp...RF2320
Vendor:Other Category:Other
The RF2320 is a general purpose, low-cost, high-linearity RF amplifier IC. RF2320 is manufactured on a Gallium Arsenide process and is featured in an SOP-16 batwing package. RF2320 has been designed for use as an easily ...